ANALISIS PENGARUH PENGGUNAAN AGREGAT BUATAN GEOPOLIMER BERBASIS FLY ASH DENGAN METODE CRUSHING TERHADAP SIFAT MEKANIK BETON

AFIFAH, DEFIRIA and Adhitya, Bimo Brata (2023) ANALISIS PENGARUH PENGGUNAAN AGREGAT BUATAN GEOPOLIMER BERBASIS FLY ASH DENGAN METODE CRUSHING TERHADAP SIFAT MEKANIK BETON. Undergraduate thesis, Sriwijaya University.

[thumbnail of RAMA_22201_03011281924038.pdf] Text
RAMA_22201_03011281924038.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (6MB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_TURNITIN.pdf] Text
RAMA_22201_03011281924038_TURNITIN.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (28MB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_01_front_ref.pdf] Text
RAMA_22201_03011281924038_0010038104_01_front_ref.pdf - Accepted Version
Available under License Creative Commons Public Domain Dedication.

Download (2MB)
[thumbnail of RAMA_22201_03011281924038_0010038104_02.pdf] Text
RAMA_22201_03011281924038_0010038104_02.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (395kB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_03.pdf] Text
RAMA_22201_03011281924038_0010038104_03.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (3MB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_04.pdf] Text
RAMA_22201_03011281924038_0010038104_04.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (456kB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_05.pdf] Text
RAMA_22201_03011281924038_0010038104_05.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (54kB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_06_ref.pdf] Text
RAMA_22201_03011281924038_0010038104_06_ref.pdf - Bibliography
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (143kB) | Request a copy
[thumbnail of RAMA_22201_03011281924038_0010038104_07_lamp.pdf] Text
RAMA_22201_03011281924038_0010038104_07_lamp.pdf - Accepted Version
Restricted to Repository staff only
Available under License Creative Commons Public Domain Dedication.

Download (1MB) | Request a copy

Abstract

Infrastructure growth in the world in the last few decades has developed significantly which has led to an increase in consumption of material needs. One of the most common materials used in industry and construction today is concrete. However, one of the constituent materials of concrete, namely coarse aggregate or crushed rock, has since experienced a decrease in its availability in nature. In order for the sustainability of concrete infrastructure development to continue, along with the increasing demand for aggregate in the construction industry, an alternative effort is needed to reduce the use of natural aggregates. One of them is by producing artificial aggregates through geopolymerization techniques. Geopolymer itself is a reaction between materials that have a high content of silica and alumina such as fly ash with an alkaline activator. Based on the above, it is necessary to carry out further research related to the substitution of natural aggregates with geopolymer-made aggregates produced by the crushing technique in concrete mixtures which will make concrete have a lower specific gravity than conventional concrete. This study aims to analyze and understand the effect of fly ash-based geopolymer-made aggregates using the crushing technique on the mechanical properties of concrete. In this study it was found that concrete with fly ash-based geopolymer-made aggregate substitution using the crushing method produced an average compressive strength of 17.967% lower and an average tensile strength of 22% lower than the normal concrete. With details of the numbers on the results of the compressive strength sequentially 3 days and 28 days, namely on normal concrete of 18.327 MPa and 28.976 MPa, while the results of compressive strength on concrete crushing are 15.018 MPa and 23.418 MPa. As well as the results of the tensile strength test sequentially for 3 days and 28 days, namely on normal concrete of 2.280 MPa and 2.917 MPa, where the tensile strength results on crushing concrete are smaller, namely 1.782 MPa and 2.323 MPa.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Geopolymer Lightweight Aggregate, Fly Ash, Crushing Technique, Mechanical Properties of Concrete
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials > TA401.A327 Materials science
T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials > TA418.9.C6S42 Composite materials--Finishing. Machining
Divisions: 03-Faculty of Engineering > 22201-Civil Engineering (S1)
Depositing User: Defiria Afifah
Date Deposited: 08 May 2023 07:55
Last Modified: 08 May 2023 07:55
URI: http://repository.unsri.ac.id/id/eprint/100753

Actions (login required)

View Item View Item