Effect of fly ash as reinforcement on mechanical properties of aluminum scrap based hybrid composite (Similarity)

Arifin, Amir and Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Dwi, Purba and Gunawan, Gunawan (2021) Effect of fly ash as reinforcement on mechanical properties of aluminum scrap based hybrid composite (Similarity). Turnitin Universitas Sriwijaya, Selangor, Malaysia. (Submitted)

[thumbnail of 2018 Effect of Fly Ash Reinforcement on Mechanical Properties of Aluminum Scrap Based Hybrid composite-Amir Arifin dkk 2018.pdf]
Preview
Text
2018 Effect of Fly Ash Reinforcement on Mechanical Properties of Aluminum Scrap Based Hybrid composite-Amir Arifin dkk 2018.pdf - Other

Download (3MB) | Preview

Abstract

Aluminum matrix composite (AMC) has been widely used in various industries such as Automotive, aerospace and marine. One of the constraints to fabricate AMC is the high costs involved. Fly ash is a coal combustion waste that have considerable potential as an alternative material for the manufacture of AMC. In this work, AMC was fabricated through stir casting methods, alumina and fly ash are utilized as reinforcement. Mechanical properties of the composite were analysed based on the results of impact test, tensile test and hardness test. Impact test revealed that the maximum energy absorbed of the AMC is 14.224 Joule with composition 8 wt% alumina and 12 wt% fly ash. Moreover, tensile strength and hardness testing result on AMC showed the similar tendency. Mechanical properties increase linearly with increasing the addition of fly ash. The maximum value was obtained at 133.74 MPa and 65.37 BHN for tensile strength and hardness number, respectively. Microstructural results also showed that there was grain refinement to the addition of fly ash composition, which supports the mechanical properties result

Item Type: Other
Uncontrolled Keywords: Aluminum matrix composite, Aluminum alloy, Fly ash, Mechanical properties, Stir casting.
Subjects: #3 Repository of Lecturer Academic Credit Systems (TPAK) > Results of Ithenticate Plagiarism and Similarity Checker
Divisions: 03-Faculty of Engineering > 21201-Mechanical Engineering (S1)
Depositing User: Dr. Ir. Irwin Bizzy, M.T.
Date Deposited: 12 May 2022 03:20
Last Modified: 12 May 2022 03:20
URI: http://repository.unsri.ac.id/id/eprint/69412

Actions (login required)

View Item View Item