SIMULATION OF DELIGNIFICATION PROCESS IN DIGESTER WITH TWO INLETS WHITE LIQUOR USING CFD ANSYS 19.2 FOR PREDICTING LIGNIN RESIDUE

Novia, Novia (2021) SIMULATION OF DELIGNIFICATION PROCESS IN DIGESTER WITH TWO INLETS WHITE LIQUOR USING CFD ANSYS 19.2 FOR PREDICTING LIGNIN RESIDUE. Turkish Journal of Physiotherapy and Rehabilitation, 32 (3). pp. 8949-8957. ISSN 2651-446X

This is the latest version of this item.

[thumbnail of 1. 32-1-1105_3 Jurnal CFD Zeolita Lengkap Cover, editor daftar isi.pdf] Text
1. 32-1-1105_3 Jurnal CFD Zeolita Lengkap Cover, editor daftar isi.pdf
Restricted to Registered users only
Download (1MB)

Abstract

Based on the pulp refinery data on October 2020, the total average of lignin content in the digester was about 20.5%. This high amount of lignin during the pulping process was due to the non-uniformity mixing between white liquor and lignin. Therefore, the objective of this research was to simulate delignification process in digester with two inlets white liquor using CFD Ansys 19.2. The various NaOH concentrations (16%-22%) and operating temperatures (151oC-160oC) were also investigated. The simulation results using CFD Ansys Fluent 19.2 showed the optimum condition of the remaining lignin of 16.7% obtained at NaOH 14 g/l and the temperature of 151oC, which was lower than the actual data (20.7%)Data obtained from the simulation results can be used to analyze several aspects such as mass fraction of each compound, temperature distributions, velocity profile, and vector. CFD simulations can be used by researchers as a guide for experiment.

Item Type: Article
Subjects: T Technology > TP Chemical technology > TP155-156 Chemical engineering
Divisions: 03-Faculty of Engineering > 24201-Chemical Engineering (S1)
Depositing User: Dr Novia Sumardi
Date Deposited: 04 May 2023 23:55
Last Modified: 04 May 2023 23:55
URI: http://repository.unsri.ac.id/id/eprint/99535

Available Versions of this Item

Actions (login required)

View Item View Item