Items where Subject is "TJ1180.A34 Machining"

Group by: Creators | Item Type
Jump to: F | H | M | N | R | S | T | W | Y | Z
Number of items at this level: 23.

F

FERNANDO, M. ANDRE and Marwani, Marwani (2018) KAJI EKSPERIMENTAL PERFORMANSI ALAT PEMANAS AIR SURYA PIPA TEMBAGA MENGGUNAKAN GLASS TUBE COLLECTOR RANGKAIAN SERI DAN PARALEL. Undergraduate thesis, Sriwijaya University.

H

HERMAWAN, MUHAMMAD IMAM AFIF and Yanis, Muhammad (2019) ANALISIS PENGARUH KONDISI PEMOTONGAN TERHADAP GETARAN PADA SPINDLE HEAD MESIN FREIS VERTIKAL. Undergraduate thesis, Sriwijaya University.

M

Mohruni, Amrifan Saladin (2001) Studi Eksperimental Peningkatan Kualitas Proses Bor (High Speed Cutting Process) pada bermacam-macam baja. In: The 4th Quality in Research (QiR) Seminar, Faculty of Engineering, University of Indonesia, 21-23 August 2001, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and SUPARMAN, DEDI (2012) Mathematical Modeling for Turning on Steels using Response Surface Methodology. In: Seminar Nasional Tahunan Teknik Mesin XI (SNTTM XI) & Thermofluid IV Universitas Gadjah Mada (UGM), 16-17 October 2012, Yogyakarta.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and ARDIANSYAH, AHMAD (2009) Utilization of Genetic Algorithm for Cutting Force Optimization when Machining Ti-6Al-4V using TiAlN Coated End Mills. In: Seminar Nasional Teknik Mesin 4, Universitas PETRA, 30 June 2009, Surabaya.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and FAIZAL, HERDINALD (2009) Optimization of Surface Roughness in End Milling Ti-6Al-4V using TiAlN Coated Tools by Utilizing Genetic Algorithm. In: Seminar on Application and Research in Industrial Technology, SMART, 22 July 2009, Yogyakarta.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and HANSON, RAHMADI (2011) Optimization of Cutting Conditions when End Milling Aeronautic Materials (Ti-6Al-4V) using Genetic Algorithm and Response Surface Methodology. In: The 12th International Conference on QiR (Quality in Research) 2011, 4-7 July 2011, Denpasar, Bali.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and SANTO, P. S. (2009) Implementation of Genetic Algorithm in Tool Life Optimization when End Milling of Ti64 using TiAlN Coated Tools. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII, 11-12 Agustus 2009, Semarang.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2007) Application of Response Surface Methodology in the Development of Tool Life Prediction Models when End Milling Ti-6Al4V. In: The 10th International Conference on Quality in Research (QIR) 2007, 4-6 December 2007, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2006) Investigation of Optimum Cutting Condition when End Milling Titanium Alloy Ti-6Al-4V. In: The 9th International Conference on Quality In Research 2006, 6-7 September 2006, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2007) Optimization of Surface Roughness when End Milling Ti-6Al4V using TiAlN Coated Tool. In: The 10th International Conference on Quality in Research (QIR) 2007, 4-6 December 2007, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, Safian and Syed, Mat Isa (2006) Investigation The Surface Integrity of Uncoated and TICN Coated Carbides Tools When End Milling of Titanium Alloy Ti-6Al=4V. In: National Scientific Meeting of Indonesians Engineering Lecturer (PNDT 2006), 5-6 September 2006, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Yuliwati, Erna and Sharif, Safian and Ismail, Ahmad Fauzi and Yani, Irsyadi (2019) Green Machining of Thin-Wall Titanium Alloy. In: Innovations in Manufacturing for Sustainability. Materials Forming, Machining and Tribology, - (-). Springer Nature Switzerland AG. Part of Springer Nature 2019, Switzerland, pp. 147-168. ISBN 978-3-030-03276-0

N

Nukman, Nukman and Aziz, Umar Abdul and Akhmad, Al Antoni (2014) Analisa Kekasaran Permukaan Alumnium dan Baja Karbon Rendah yang Dibubut dengan Pahat HSS dan Pahat dari Pegas Daun Mobil HINO FM260. Jurnal Rekayasa Mesin, 13 (4). pp. 1-9. ISSN 2338-7009

R

Rahim, Erween Abdul and Sharif, Safian and Ahmad, Zainal Abidin and Mohruni, Amrifan Saladin and Syed, Mat Isa (2005) Machinability Investigation when Drilling Titanium Alloys. In: International Conference on Leading Edge Manufacturing in 21st Century (LEM2005), 19-22 October 2005, Nagoya, Japan.

S

Sharif, Safian and Mohruni, Amrifan Saladin (2005) Performance Evaluation of uncoated and TiCN coated Carbide Tools when End Milling of Titanium Alloy Ti-6Al-4V. In: The 8th International Conference on Quality In Research 2005, 9-10 August 2005, Jakarta, Indonesia.

Sharif, Safian and Mohruni, Amrifan Saladin and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2006) Optimization of Surface Roughness Prediction Model in End Milling Titanium Alloy (Ti-6Al4V). In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Malacca, Malaysia.

Sharif, Safian and Rahim, Erween Abdul and Mohruni, Amrifan Saladin and Jawaid, A (2007) Effect of Edge Geometry on PVD-TiN Coated Carbide Tools when Face Milling Titanium Alloy, Ti-6246. In: The 4th International Conference on Leading Edge Manufacturing in 21st Century, 7-9 November 2007, Fukuoka, Japan.

T

THAMRIN, ISMAIL and Mohruni, Amrifan Saladin and Sipahutar, Riman and Yani, Irsyadi (2020) PEMODELAN KEKASARAN PERMUKAAN BENDA KERJA DAN TEMPERATUR PADA PEMBUBUTAN PANAS AISI 4340 DENGAN METODE RESPON PERMUKAAN DAN JARINGAN SARAF TIRUAN. Doctoral thesis, Sriwijaya University.

W

WARDANI, PRAMUDYA and Yanis, Muhammad (2019) ANALISIS GETARAN PADA PROSES FREIS MENGGUNAKAN CAIRAN PEMOTONGAN. Undergraduate thesis, Sriwijaya University.

Y

YANIS, MUHAMMAD and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) PERFORMANCE EVALUATION OF GREEN MACHINING ON THIN-WALLED Ti6Al4V USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS. Doctoral thesis, Sriwijaya University.

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi and ZAHIR, MUHAMMAD (2020) Experimental Vibration Study in Milling Thin-Walled Ti6Al4V under MQL using Coconut Oil as Cutting Fluid. Journal of Physics: Conference Series, 1500 (012034). pp. 1-8. ISSN 1742-6596

Z

Zaharuddin, M F A and Yunos, P A A and Jiyoung, Y and Mohruni, Amrifan Saladin and Yani, Irsyadi and Yanis, Muhammad (2019) Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. Journal of Physics: Conference Series, 1198 (4). pp. 1-10. ISSN 17426588, 17426596

This list was generated on Sun Jun 4 15:03:20 2023 UTC.