Investigation The Surface Integrity of Uncoated and TICN Coated Carbides Tools When End Milling of Titanium Alloy Ti-6Al=4V

Mohruni, Amrifan Saladin and Sharif, Safian and Syed, Mat Isa (2006) Investigation The Surface Integrity of Uncoated and TICN Coated Carbides Tools When End Milling of Titanium Alloy Ti-6Al=4V. In: National Scientific Meeting of Indonesians Engineering Lecturer (PNDT 2006), 5-6 September 2006, Jakarta, Indonesia.

[thumbnail of Makalah_AS_Mohruni_for_Untar.pdf] Text
Makalah_AS_Mohruni_for_Untar.pdf - Published Version

Download (993kB)
Official URL: http://www.untar.ac.id/

Abstract

Titanium alloys are widely used in aerospace industries because of their superior mechanical properties. However, titanium alloys are material that extremely difficult to machine because of their low thermal conductivity and high chemical reactivity. Recently, with increasing demands for precision machining of titanium alloy have brought the development of hard coating tools in terms of optimizing the acceptable tool life, and thus minimize tool cost. An investigation of cutting performance of uncoated and TiCN coated carbide tools when end milling of aerospace titanium alloy, Ti-6Al-4V was carried out. Machining tests were conducted at various cutting speed with constant feed and depth of cut. The performance for both cutting tools was evaluated with respect to tool wear, surface integrity of machined surface. Results show that the TiCN coated carbide tool was better than uncoated carbide tools in term of surface finish for all cutting speeds observed. Plastic deformation was found on the machined subsurface for both carbide tools

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: End Milling, Titanium Alloy, Tool Wear, Surface Integrity
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ1-1570 Mechanical engineering and machinery
T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice > TJ1180 Machining, Ceramic materials--Machining-Strength of materials-Machine tools-Design and construction > TJ1180.A34 Machining
Divisions: 03-Faculty of Engineering > 21101-Mechanical Engineering (S2)
Depositing User: Prof Amrifan Saladin Mohruni
Date Deposited: 06 Jul 2019 13:57
Last Modified: 04 Dec 2021 05:51
URI: http://repository.unsri.ac.id/id/eprint/30

Actions (login required)

View Item View Item