Experimental and analytical study on composite connection with coldformed steel of double channel sections

Firdaus, Muhammad and Saggaff, Anis and Tahir, Mahmood Md. and Ngian, Shek Poi and Sulaiman, Arizu and Salih, Musab Nimir Ali (2019) Experimental and analytical study on composite connection with coldformed steel of double channel sections. Journal of Physics: Conference Series, 620. ISSN 1757-899X

[img]
Preview
Text
Firdaus_2019_IOP_Conf._Ser.__Mater._Sci._Eng._620_012044.pdf

Download (861kB) | Preview

Abstract

The opportunity of Cold-Formed Steel (CFS) as an alternative construction material is still worth to be considered. The amounts of research concerning using this material is the evidence that the use of CFS is getting more acceptable. However, the studies of CFS as part of composite joint is yet to be established. This paper presents the use of 10mm thick hot-rolled gusset plate slipped between double lipped C-channel arranged back-to-back to form the proposed composite connection. Two specimens with and without seat angle were tested until failure. The weakness of thin plate behavior at the joint area was reduced by means of angle stiffener placed at the column web. The calculation procedure was developed due to limited design rule in Eurocode for this connection type, and compare with the experimental results to obtain the relationship between these two methods. It can be concluded that the use of seated angle has contributed to an increase in connection capacity

Item Type: Article
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice > TJ1180 Machining, Ceramic materials--Machining-Strength of materials-Machine tools-Design and construction > TJ1180.M27 Machining-Composite materials
T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice > TJ1185 General works Machine tools and machining Including errors in workmanship, accuracy of fitting, etc. > TJ1185.A455 Metal-cutting. Steel alloys. Heat resistant alloys
Divisions: 03-Faculty of Engineering > 22101-Civil Engineering (S2)
Depositing User: Prof Anis Saggaff
Date Deposited: 12 Oct 2020 13:23
Last Modified: 12 Oct 2020 13:23
URI: http://repository.unsri.ac.id/id/eprint/36646

Actions (login required)

View Item View Item