Items where Division is "21201-Mechanical Engineering (S1)" and Year is 2020

UNSPECIFIED (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2634/OL/UN9/UPT.PUS.SIRK/10.2020. Sriwijaya University Library. (Submitted)

ABDURRACHMAN, YUSUF and Hadi, Qomarul (2020) PENGARUH FRAKSI VOLUME PENGUAT PADA KOMPOSIT AL-FLY ASH YANG DIBUAT DENGAN METODE STIR CASTING TERHADAP LAJU KOROSI. Undergraduate thesis, Sriwijaya University.

ADILAH, MUHAMMAD HISBAH and Yani, Irsyadi (2020) PENGEMBANGAN SISTEM IDENTIFIKASI DAN KLASIFIKASI SAMPAH PLASTIK TIPE HDPE, PVC, DAN PS MENGGUNAKAN METODE BACKPROPAGATION. Undergraduate thesis, Sriwijaya University.

AL ABIDIN, SAID and Kadir, M.Zahri (2020) STUDI EKSPERIMENTAL UNJUK KERJA MULTI INLET CYCLONE SEPARATOR TERHADAP VARIASI KECEPATAN ALIRAN UDARA. Undergraduate thesis, Sriwijaya University.

AL FARIZI, MUHAMMAD FARID and Gunawan, Gunawan (2020) PENGARUH VARIASI TEMPERATUR SINTERING PADA FABRIKASI ALUMINIUM FOAM DENGAN KUNING TELUR SEBAGAI FOAMING AGENT. Undergraduate thesis, Sriwijaya University.

AL FAYYAD, MUHAMMAD ANDRO and Utami, Nurhabibah Paramitha Eka (2020) PENGARUH VARIASI DIMENSI CETAKAN PASIR TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SCRAP DENGAN POLA CIRCLE MOLD. Undergraduate thesis, Sriwijaya University.

ALDI PRATAMA, MUHAMMAD and Marwani, Marwani (2020) ANALISIS PERFORMANSI KOMPRESOR TORAK TERHADAP PERUBAHAN TEKANAN KELUAR TABUNG PENAMPUNG UDARA. Undergraduate thesis, Sriwijaya University.

ALFAHRIZI, ALDI DWI and Pratiwi, Diah Kusuma (2020) PENGELASAN BESI COR KELABU MENGGUNAKAN SHIELDED METAL ARC WELDING YANG DI POST WELD HEAT TREATMENT. Undergraduate thesis, Sriwijaya University.

ALFARISSI, RIZKY and Abidin, Zainal (2020) ANALISA DISTRIBUSI TEGANGAN REGANGAN DAN PERPINDAHAN PADA BEJANA TEKAN METHANATOR MENGGUNAKAN PROGRAM ANSYS. Undergraduate thesis, Sriwijiaya Univerisity.

ALFREDO, WENDY AGAM (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:269/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

ALFREDO, WENDY AGAM and Bayin, Darmawi (2020) PENGUJIAN SUDU TURBIN AIR JENIS BARU DENGAN SUDUT GAMMA 10° DENGAN VARIABEL JUMLAH SUDU UNTUK MELIHAT EFEKTIFITAS PENYERAPAN DAYA PADA DIAMETER RODA KINCIR 0,8 METER. Undergraduate thesis, Sriwijaya University.

ALIM, NAQLI and Santoso, Dyos and Riady, M. Ihsan (2020) ANALISIS ENERGI DAN EKSERGI PADA SISTEM KOGENERASI TURBIN GAS PT.PUSRI PALEMBANG. Undergraduate thesis, Sriwijaya University.

ALMAHDINI, FATI ANDARI and Thamrin, Ismail (2020) PEMODELAN TEMPERATUR PROSES PEMESINAN BUBUT AISI 4340 DENGAN METODE HOT MACHINING MENGGUNAKAN ARTIFICIAL NEURAL NETWORK. Undergraduate thesis, Sriwijaya University.

AMAL, MUHAMMAD GIFARI ICHLASUL (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2718/OL/UN9/UPT.PUS.SIRK/10.2020. Sriwijaya University Library. (Submitted)

AMIN, M.WAHYUDI and Gunawan, Gunawan (2020) STUDI PEMBUATAN KOMPOSIT HA/SiO2 BERPORI MENGGUNAKAN SPACE HOLDER UBI JALAR UNGU. Undergraduate thesis, Sriwijaya University.

AN-NAJIY, AHMAD MUJADDID and Yanis, Muhammad (2020) ANALISIS PREDIKSI KEKASARAN PERMUKAAN HASIL PROSES SIDE MILLING AISI 1045 MENGGUNAKAN ARTIFICIAL NEURAL NETWORKS (ANN). Undergraduate thesis, Sriwijaya University.

ARBINTA, BIMA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2651/OL/UN9/UPT.PUS.SIRK/10.2020. Sriwijaya University Library. (Submitted)

ARDHIKA, MUHAMMAD and Abidin, Zainal (2020) ANALISIS DISTRIBUSI TEGANGAN DAN PERPINDAHAN ELEMEN PIPA PADA SISTEM PERPIPAAN DENGAN MENGGUNAKAN PROGRAM CAESAR II. Undergraduate thesis, Sriwijaya University.

ARHANSYAH, FEBBY (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1676/UN9/UPT.PUS.SIRK/8.2020. Sriwijaya University Library. (Submitted)

ARHANSYAH, FEBBY and Nukman, Nukman (2020) PENGARUH HOLDING TIME ARTIFICIAL AGING TERHADAP KINETIKA REAKSI OKSIDASI ALUMINIUM 6061 PADA TEMPERATUR TINGGI. Undergraduate thesis, Sriwijaya University.

ASTRADA, YOGA MARTINO (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1187/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

ASURA, IHSAN and Arifin, Amir (2020) ANALISA PENGARUH PERBEDAAN FLOW RATE ARGON PADA PENGELASAN COMMERCIALLY PURE TITANIUM TERHADAP SIFAT MEKANIK DAN MIKROSTRUKTUR. Undergraduate thesis, Sriwijaya University.

AZIM, ABDURRAHMAT and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN PASIR BERBENTUK DIAMOND MOLD TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.

AZIS, YAYANG PRANANDA ABDUL (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1232/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

Arifin, Amir (2020) BUkti Reviewer Pada Journal of Engineering Science and Technology. Taylors University.

Arifin, Amir and Gunawan, Gunawan (2020) Bukti Korespondensi_Fabrication of Titanium-matrix composite with 40 wt% hydroxyapatite by Powder Injection Molding. Springer Link.

Arifin, Amir and Gunawan, Gunawan and Priyadi, arif and Sanjaya, Fathan Aditya (2020) Development and characterization of porous hydroxyapatite-Alumina composite for engineering application. IOP Conference Series: Materials Science and Engineering, 857 (012005). pp. 1-6. ISSN 1757-899X

Arifin, Amir and Gunawan, Gunawan and Yani, Irsyadi (2020) Failure analysis of AISI 304 stainless steel pipeline transmission a petrochemical plant. IOP Conference Series: Materials Science and Engineering, 857 (012006). pp. 1-6. ISSN 1757-899X

Arifin, Amir (2020) Metalurgi dan Perpindahan Panas Las. [Teaching Resource] (Unpublished)

BAGASWARA, ARUNG (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1092/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

Barlin, Barlin (2020) Korepondensi Taguchi Method for Optimizing Process Parameters. Fakultas Teknik Universitas Sriwijaya.

Bizzy, Irwin (2020) TEKNOLOGI TENAGA SURYA (similarity). UPT. Penerbit dan Percetakan Universitas Sriwijaya.

Bizzy, Irwin and Sipahutar, Riman and Puspitasari, Dewi (2020) The cooling effect of polycrystalline type PV panels using perforated aluminum plates(Similarity). IOP Publishing.

Bizzy, Irwin and Yanis, Muhammad and Mohruni, Amrifan Saladin and Firdaus, Aneka and Abrar, A (2020) MESIN PENCACAH PAKAN HIJAUAN TERNAK UNTUK KELOMPOK PETERNAK SAPI DI TALANG KEPUH KELURAHAN GANDUS KECAMATAN GANDUS KOTA PALEMBANG (similarity). Fakultas Teknik Universitas Sriwijaya.

Bizzy, Irwin and Sipahutar, Riman and Puspitasari, Dewi and Sofijan, Armin and Fajri, M.A. (2020) The cooling effect of polycrystalline type PV panels using perforated aluminum plates. IOP Conference Series: Materials Science and Engineering, 909 (012005). pp. 1-7. ISSN 1757-899X

Bizzy, Irwin and Syamsul, Syamsul and Cornely, Epina and Kurniawan, Bayu and Apriyan, Dian (2020) ANALISIS PENGGUNAAN TEKNOLOGI HIBRID DI SCIENCE TECHNO PARK PROVINSI SUMATERA SELATAN. PUBLIKASI PENELITIAN TERAPAN DAN KEBIJAKAN, 3 (2). ISSN 2621-8119

Bizzy, Irwin and Syamsul, Syamsul and Cornely, Epina and Kurniawan, Bayu and Apriyan, Dian (2020) ANALISIS PENGGUNAAN TEKNOLOGI HIBRID DI SCIENCE TECHNO PARK PROVINSI SUMATERA SELATAN (Similarity). Publikasi Penelitian Terapan dan Kebijakan, Palembang.

Bizzy, Irwin and Yanis, Muhammad and Mohruni, Amrifan Saladin and Firdaus, Aneka and Abrar, A. (2020) MESIN PENCACAH PAKAN HIJAUAN TERNAK UNTUK KELOMPOK PETERNAK SAPI DI TALANG KEPUH KELURAHAN GANDUS KECAMATAN GANDUS KOTA PALEMBANG. Seminar Nasional AVoER. pp. 780-783. ISSN 978-979-19072-6-2

CATUR, MUHAMMAD ICHSAN RUSMIN NURZA UTAMA and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN LOGAM (DIAMOND MOLD) TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.

CHANDRA, SURYA ADI and Arifin, Amir (2020) PEMBUATAN KOMPOSIT TEMBAGA/ABU TERBANG BERPORI DENGAN KUNING TELUR SEBAGAI PEMBENTUK PORI. Undergraduate thesis, Sriwijaya University.

DAVINCI, RINALDI (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1295/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

DHARMALASARI, ARDHILA and Thamrin, Ismail (2020) PEMODELAN KEKASARAN PERMUKAAN PEMESINAN BUBUT AISI 4340 DENGAN METODE HOT MACHINING MENGGUNAKAN RESPONSE SURFACE METHODOLOGY. Undergraduate thesis, Sriwijaya University.

DWINESA, NIKOLAS and Yanto, Joni and Santoso, Dyos (2020) PENINGKATAN PERFORMANSI TURBIN ANGIN SAVONIUS DENGAN MODIFIKASI GEOMETRI DAN KONFIGURASI SUDU. Undergraduate thesis, Sriwijaya University.

Dahlan, Muhammad Hatta and Aisyah, Yuni and Puteri S, Amalia (2020) Similarity Study about Utilization of Used Oil by Ceramic Membrane to Separate The Metal Elements. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and Arita, Susila and Faizal, Muhammad (2020) Similarity Study of Local West Sumatera Stove Performances in Boiling Gambir (Uncaria Gambir Roxb.). Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and Sitanggang, Willtri and Sinambela, Dedy (2020) Similarity Perbandingan Pengolahan Limbah Cair Karet Dengan Koagulan Asam Formiat, Asap Cair Dan Asam Sulfat Menggunakan Teknologi Membran. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and al qhani, awis and nopiansyah, rolan (2020) similarity Pulp and Paper Liquid Waste Treatment Using ElectroCoagulation Membrane. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi and Sipahutar, Riman and Bizzy, Irwin (2020) Scoopy Blade for Low Current River Waterwheel Supporting the Energy Needs in the Rural Areas of Indonesia. Journal of Physics: Conference Series, 1500 (012024). pp. 1-9. ISSN 17426588, 17426596

Darmawi, Darmawi and Sipahutar, Riman and Bizzy, Irwin (2020) Scoopy Blade for Low Current River Waterwheel Supporting the Energy Needs in the Rural Areas of Indonesia (Similarity). IOP Publishing Ltd..

Darmawi, Darmawi (2020) MEMBERIKAN PEMBIMBINGAN AKADEMIK KEPADA MAHASISWA PADA JURUSAN TEKNIK MESIN FT UNSRI KAMPUS INDRALAYA SEMESTER GENAP 2020/2021. Faculty of Engineering Sriwijaya University. (Unpublished)

Darmawi, Darmawi (2020) MENGUJI PADA SEMINAR PROPOSAL TUGAS AHIR MAHASISWA (S1) PADA JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNSRI PADA TANGGAL 25-01-2011. BERPERAN SEBAGAI ANGGOTA PENGUJI UNTUK 4 MAHASISWA. Faculty of Engineering Sriwijaya University. (Unpublished)

Darmawi, Darmawi (2020) MENGUJI SIDANG SARJANA (S1) PADA JURUSAN TEKNIK MESIN FT UNSRI TANGGAL 16 JULI 2020. BERPERAN SEBAGAI KETUA PENGUJI 1X, SEBAGAI ANGGOTA PENGUJI 2X DAN MAHASISWA BIMBINGAN 1 ORANG A.N. RIZKY BAGUS PRATAMA. Faculty of Engineering Sriwijaya University. (Unpublished)

Darmawi, Darmawi (2020) SK MENGUJI (S1) PADA JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNSRI PADA TANGGAL 22-12-2020. PERAN 1X KETUA PENGUJI, 1X ANGGOTA PENGUJI. MAHASISWA BIMBINGAN 1 ORANG A.N. ANDETA VALENTINO. Faculty of Engineering Sriwijaya University, Indralaya. (Unpublished)

Darmawi, Darmawi and Sipahutar, Riman and Bizzy, Irwin (2020) PENGUJIAN KINCIR AIR ALIRAN LAMINER ARUS BAWAH (UNDERSHOT) DENGAN SUDU SENDOK PADA SALURAN TERBUKA SEGI EMPAT BERUKURAN 820X150X220 MM (Similarity). Turnitin Universitas Sriwijaya, Palembang. (Submitted)

Darmawi, Darmawi and Sipahutar, Riman and Bizzy, Irwin (2020) PENGUJIAN KINCIR AIR ALIRAN LAMINER ARUS BAWAH (UNDERSHOT) DENGAN SUDU SENDOK PADA SALURAN TERBUKA SEGI EMPAT BERUKURAN 820X150X220 MM. Seminar Nasional AVoER XII. pp. 925-928. ISSN 978-979-19072-6-2

Darmawi, Darmawi and Sipahutar, Riman and Bizzy, Irwin (2020) SCOOPY BLADE FOR LOW CURRENT RIVER WATERWHEEL SUPPORTING THE ENERGY NEEDS IN THE RURAL AREAS OF INDONESIA. Journal of Physics Conference Series, 1500 (-). ISSN -

Darmawi, Darmawi and Sonny, Prananda (2020) The Effect of the Gap Distance on The Corrosion Rate of SS400 Steel and C27000 Brass. FLYWHEEL JURNAL TEKNIK MESIN UNTIRTA, 6 (01). pp. 27-30. ISSN p-ISSN 2407-7852 | e-ISSN 2597-7083

ERISTA, ERLAN WAHYU and Mohruni, Amrifan Saladin (2020) ANALISIS KEKASARAN PERMUKAAN PADA PEMBUBUTAN TITANIUM MENGGUNAKAN SISTEM PENDINGINAN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

FADHLURRAHMAN, IRFAN GHANI and Basri, Hasan (2020) ANALISIS KEKUATAN TEKAN PERANCAH TULANG POLYLACTIC ACID HASIL FABRIKASI MESIN CETAK 3D. Undergraduate thesis, Sriwijaya University.

FAJAR, LUKMAN and Mohruni, Amrifan Saladin (2020) PERANCANGAN RODA GIGI PADA PERALATAN UJI PROSES PENGGILINGAN TEBU DENGAN INSTALLED MILLING MACHINE DI PABRIK GULA CINTA MANIS. Undergraduate thesis, Sriwijaya University.

FALENTRI, REGA and Pratiwi, Diah Kusuma (2020) ANALISIS LAJU KOROSI TEGANGAN PADA SS 304L GTAW I=90A I=120A DENGAN VARIASI BENTUK DAN MEDIA AIR RAWA. Undergraduate thesis, Sriwijaya University.

FAREZA, YUDHA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1602/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

FAREZA, YUDHA and Alian, Helmy (2020) PENGARUH TEMPERATUR TINGGI TERHADAP KEKUATAN MEKANIK DAN STRUKTUR MIKRO PADA MATERIAL BAJA TULANGAN POLOS YANG TERBAKAR. Undergraduate thesis, Sriwijaya University.

FARISY, MUHAMMAD THORIK JAYA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1298/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

FARISY, MUHAMMAD THORIK JAYA and Burlian, Firmansyah (2020) PENGARUH PENGATURAN VARIASI ARUS LAS TERHADAP HASIL PENGUJIAN KEKERASAN DAN LAJU KOROSI PADA PLAT BESI. Undergraduate thesis, Sriwijaya University.

FIRDAUS, FIRDAUS (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:651/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

FIRDAUS, FIRDAUS and Yani, Irsyadi (2020) ANALISA TEGANGAN SISTEM PEMIPAAN HIGH PRESSURE STEAM OUTLET DRAIN MENGGUNAKAN SOFTWARE CAESAR II. Undergraduate thesis, Sriwijaya University.

Fajri Vidian, Fajri (2020) Corespondence Author of An Experimental on Small Scale Gasoline Engine Performance. Horizon Research Publishing. (Submitted)

GIOVANNI, DIONISIUS and Chandra, Hendri (2020) PERANCANGAN SHAFT DRIVE PULLEY SP 1600 PADA SISTEM BELT CONVEYOR PT BUKIT ASAM. Undergraduate thesis, Sriwijaya University.

GULTOM, JAINAL and Yanis, Muhammad (2020) ANALISIS GAYA POTONG PADA PEMODELAN BUBUT AISI 1045 MENGGUNAKAN SOFTWARE ABAQUS. Undergraduate thesis, Sriwijaya University.

Gunawan, Gunawan (2020) Development of aluminum matrix composite with hybrid Reinforcement using stir casting route. IOP Conf. Series: Materials Science and Engineering, 857 (2020). pp. 1-6. ISSN 17578981, 1757899X

Gunawan, Gunawan and Arifin, Amir and M A, Akbar and Ihsan, asura (2020) Effect of fly ash content in Aluminum matrix composite through stir casting method on mechanical and physical properties. IOP Conference Series: Materials Science and Engineering, 857 (012008). pp. 1-6. ISSN 1757-899X

HAFIZH, DIENUL and Yani, Irsyadi (2020) RANCANG BANGUN PROTOTIPE SISTEM PROTEKSI PANAS YANG TERINTEGRASI PADA AKTUATOR PUSHER BERBASIS MOTOR DC. Undergraduate thesis, Sriwijaya University.

HAZ, REIZA WIJAYA DWI and Yani, Irsyadi (2020) ANALISIS DISTRIBUSI TEGANGAN, REGANGAN, DAN PERPINDAHAN PADA BEJANA TEKAN LPG TANK T-173 MENGGUNAKAN PERANGKAT LUNAK AUTODESK SIMULATION MECHANICAL 2016. Undergraduate thesis, Sriwijaya University.

HAZAZI, AZIMAN and Gunawan, Gunawan (2020) STUDI PENGARUH VARIASI TEMPERATURE SINTERING TERHADAP SIFAT MEKANIIK DAN FISIK KOMPOSIT HA/SiO2. Undergraduate thesis, Sriwijaya University.

HIDAYAT, M. AMAN and Yani, Irsyadi (2020) ANALISIS RISK BASED INSPECTION ATMOSPHERIC STORAGE TANK MENGGUNAKAN PERANGKAT LUNAK RAFAOLEC DAN HITUNGAN MANUAL. Undergraduate thesis, Sriwijaya University.

HIDAYAT, M. AWALUDDIN TAUFIK and Chandra, Hendri (2020) EVALUASI BEBAN DAN UMUR PAKAI BANTALAN PADA ROLLER IDLER BELT CONVEYOR. Undergraduate thesis, Sriwijaya University.

Hasanudin, Hasanudin and Faizal, Muhammad and Said, Muhammad and Wijaya, Karna and Rachmat, Addy and Dahlan, Muhammad Hatta (2020) Similarity: Effect of Temperature and Catalyst to Feed Ratio on Production Biofuel from Fatty Acid of Palm Oil Industrial Sludge Hydrocracking. Turnitin Universitas Sriwijaya. (Submitted)

ILHAM, AHMAD BAGUS and Mataram, Agung (2020) PENGARUH VARIASI TEMPERATUR POST-CURING TERHADAP KEKUATAN TARIK DAN KETAHANAN IMPACT KOMPOSIT RESIN POLYESTER BERPENGUAT SERAT AMPAS TEBU. Undergraduate thesis, Sriwijaya University.

INDOBA, SATRIAMANDALA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1067/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

JAYANTI, RAHMA ETI (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2161/OL/UN9/UPT.PUS.SIRK/9.2020. Sriwijaya University Library. (Submitted)

KARDI, AHMAD and Thamrin, Ismail (2020) PENGARUH KECEPATAN POTONG dan KEDALAMAN PEMAKAN TERHADAP KEAUSAN TEPI PAHAT KARBIDA PADA PROSES BUBUT MENGGUNAKAN MATERIAL BAJA KARBON RENDAH. Undergraduate thesis, Sriwijaya University.

KARIM, MAHMED KOLBI and Yanis, Muhammad (2020) ANALISIS SOFTWARE RAFAOLEC (RISK ASSESMENT FOR APPROACH OF LATEST EQUIPMENT CONDITION) RISK BASED INSPECTION BERBASIS API RP 580/581 PADA PRESSURE RELIEF DEVICES PT XYZ. Undergraduate thesis, Sriwijaya University.

KURNIA, MUHAMMAD SYAFAAT ADI and Hadi, Qomarul (2020) PENGARUH PERSENTASE TEMPA MATERIAL METAL MATRIK KOMPOSIT HASIL PROSES STIR CASTING TERHADAP LAJU KOROSI. Undergraduate thesis, Sriwijaya University.

LIANTARA, MUHAMMAD RIZKI and Nukman, Nukman (2020) PENGARUH CAMPURAN VARIASI BATUBARA HALUS DALAM CORAN LOGAM ALUMINIUM CAIR TERHADAP KEKUATAN TARIK, KEKERASAN DAN BEBAN IMPAK. Undergraduate thesis, Sriwijaya University.

MAHESA, BIMA GUSTI AGUNG (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1231/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

MAHESA, BIMA GUSTI AGUNG and Pratiwi, Diah Kusuma (2020) PENGELASAN PREHEAT BESI COR KELABU MENGGUNAKAN SMAW. Undergraduate thesis, Sriwijaya University.

MARWANSAH, MARWANSAH and Basri, Hasan (2020) ANALISIS PENGARUH PENGGUNAAN PERMUKAAN BERTEKSTUR PADA SLIDING TRACK TOTAL HIP ARTHROPLASTY TERHADAP KEAUSAN. Undergraduate thesis, Sriwijaya University.

MUHARDANA, M RIZKI and Astuti, Astuti (2020) PENGARUH KONSENTRASI 0,1%, 0,3%, DAN 0,5% PARTIKEL TIO2 TERHADAP KOEFISIEN KONVEKSI PADA PENUKAR KALOR PIPA GANDA BERDIAMETER 4 INCH. Undergraduate thesis, Sriwijaya University.

Marhaini, Marhaini and Faizal, Muhammad and Marsi, Marsi and Arinafril, Arinafril and Dahlan, Muhammad Hatta (2020) Similarity The Treatment of the Waste Water of Urea Fertilizer Plant with a Combined Process of Advanced Oxidation and Microalge Chlorella pyrenoidosa, Nannochloropsis sp. and Pseudomonas fluorescens Bacteria. Turnitin Universitas Sriwijaya. (Submitted)

NAUFAL, AGUSRI and Yanis, Muhammad and Budiman, Arie Yudha (2020) PENGARUH VARIASI KECEPATAN POTONG DAN KEDALAMAN PEMAKANAN TERHADAP KEKASARAN PERMUKAAN BAJA KARBON SEDANG. Undergraduate thesis, Sriwijaya University.

NUGRAHA, FADJRIN GATU and Burlian, Firmansyah (2020) PENGARUH VARIASI BERAT ROLLER CONTINUOUS VARIABLE TRANSMISION TERHADAP PERFORMA TORSI DAN DAYA PADA MOTOR MIO SOUL GT 115 CC. Undergraduate thesis, Sriwijaya University.

NUGRHO, SIGIT and Pratiwi, Diah Kusuma (2020) KAJIAN SIFAT FISIK DAN MEKANIK REFRACTORY MATERIAL SEMEN TAHAN API UNTUK VARIASI BERAT FLY ASH 40%, 50%, DAN 60%. Undergraduate thesis, Sriwijaya University.

Nukman, Nukman and Arifin, Amir (2020) Pedoman Praktikum Material UNSRI. [Teaching Resource] (In Press)

Nukman, Nukman (2020) Sertifikat Presenter Konferensi internasional (symposium) SENTEN 2018. Engineering Faculty. (Unpublished)

OKTAVIA, VENNY CHARINA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2105/OL/UN9/UPT.PUS.SIRK/9.2020. Sriwijaya University Library. (Submitted)

PARMAR, RUPINDER SINGH and Santoso, Dyos and Ihsan, Ihsan Riady (2020) STUDI EKSPERIMENTAL TURBIN ANGIN KOMBINASI SUMBU VERTIKAL GABUNGAN SAVONIUS-DARREIEUS DENGAN POROS KEMBAR. Undergraduate thesis, Sriwijaya University.

PEBRIANTI, METTA and Arifin, Amir (2020) PENGARUH TEMPERATUR SINTERING PADA FABRIKASI KOMPOSIT BERPORI ALUMUNIUM DAN FLY ASH MENGGUNAKAN FOAMING AGENT KUNING TELUR. Undergraduate thesis, Sriwijaya University.

PERNANDA, ERICK JUNION and Pratiwi, Diah Kusuma (2020) ANALISIS LAJU KOROSI TEGANGAN PADA SS 304 L. Undergraduate thesis, Sriwijaya University.

PRADANA, ADITYA HERLIN (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:686/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

PRATAMA, MUHAMMAD ADITYA PUTRA and Gunawan, Gunawan (2020) KARAKTERISASI KOMPOSIT HA/Sio2 BERPORI DENGAN SPACE HOLDER KACANG HIJAU. Undergraduate thesis, Sriwijaya University.

PRATAMA, SAIDI and Arifin, Amir (2020) ANALISIS PENGELASAN GTAW ANTARA ALLOY 800 DAN KHR 35CT DENGAN VARIASI GAS FLOW RATE. Undergraduate thesis, Sriwijaya University.

PRATAMA, SYAFIQ ADITYA and Dyos, Dyos Santoso and Ihsan, Ihsan Riady (2020) EVALUASI PERFORMANSI TERMODINAMIKA PADA PEMBANGKIT LISTRIK TENAGA GAS UAP DENGAN MENGGUNAKAN METODE ANALISIS EKSERGI. Undergraduate thesis, Sriwijaya University.

PRAWIRA, M. AFIF and Basri, Hasan (2020) ANALISIS PERMEABILITAS DAN PERILAKU MEKANIS PADA PERANCAH TULANG PLA BERPORI. Undergraduate thesis, Sriwijaya University.

PUTRA, EBIL YANI and Gunawan, Gunawan (2020) PENGUJIAN TAHAP II RISK ASSESMENT FOR APPROACH OF LATEST EQUIPMENT CONDITION (RAFAOLEC) PADA SISTEM PEMIPAAN. Undergraduate thesis, Sriwijaya University.

PUTRA, ELVINE HANDIKA and Bizzy, Irwin (2020) PENGARUH JUMLAH BAFFLE TERHADAP KINERJA ALAT PENUKAR KALOR TIPE SHELL AND TUBE. Undergraduate thesis, Sriwijaya University.

PUTRA, ELVINE HANDIKA and Bizzy, Irwin (2020) PENGARUH JUMLAH BAFFLE TERHADAP KINERJA ALAT PENUKAR KALOR TIPE SHELL AND TUBE(Similarity). Jurusan Teknik Mesin Fakultas Teknik Unsri.

Pratiwi, Diah Kusuma (2020) Bukti koresponding_Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Publishing.

Pratiwi, Diah Kusuma (2020) Bukti_korespondensi_The Effect of Annealing Process and Mold Variations to Failure Time of CuZn Cast Alloy by Dynamic Load_Diah Kusuma Pratiwi. WARSE.

Pratiwi, Diah Kusuma (2020) Corresponding_Authors_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. WARSE.

Pratiwi, Diah Kusuma (2020) Similarity_Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Publishing.

Pratiwi, Diah Kusuma (2020) Similarity_The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse, International Journal of Emerging Trends in Engineering Research.

Pratiwi, Diah Kusuma (2020) Similarity_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. WARSE.

Pratiwi, Diah Kusuma (2020) corresponding author_The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. awrse, International Journal of Emerging Trends in Engineering Research.

Pratiwi, Diah Kusuma (2020) similarity_Analysis of Upgrading Process of South Sumatera Low-Rank Coal. IOP Publishing.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. International Journal of Emerging Trends in Engineering Research, 8 (9). pp. 5688-5692. ISSN 2347 - 3983

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) Similarity The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse, International Journal of Emerging Trends in Engineering Research.

RAHMAN, FAISAL and Santoso, Dyos and Yanto, Joni (2020) OPTIMASI HEAT RECOVERY STEAM GENERATOR (HRSG) PADA PEMBANGKIT LISTRIK TENAGA UAP MUARA KARANG. Undergraduate thesis, Sriwijaya University.

RENALDY, RENALDY and Yani, Irsyadi (2020) PENGUJIAN SOFTWARE RISK BASED INSPECTION RAFAOLEC BERBASIS API RP 581 PADA HEAT EXCHANGER DENGAN STUDI KASUS PADA PT. XYZ. Undergraduate thesis, Sriwijaya University.

RIDHOANSYAH, THEO and Yanis, Muhammad (2020) ANALISIS RISK BASED INSPECTION (RBI) BERBASIS API RP 580/581 PADA PRESSURE VESSEL UNTUK PERENCANAAN INSPEKSI DI PT. XYZ. Undergraduate thesis, Sriwijaya University.

RISNAINI, DIRGAHAYU and Abidin, Zainal (2020) ANALISIS TEGANGAN, REGANGAN DAN PERPINDAHAN RANGKA MOTOR JENIS DELTA BOX R15 PADA KONDISI STATIS MENGGUNAKAN PROGRAM ANSYS. Undergraduate thesis, Sriwijaya University.

ROMSYAH, ARIAN (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1869/OL/UN9/UPT.PUS.SIRK/8.2020. Sriwijaya University Library. (Submitted)

ROMSYAH, ARIAN and Gunawan, Gunawan (2020) PENGARUH VARIASI TEMPERATUR SINTERING PADA FABRIKASI KOMPOSIT TEMBAGA: COPPER METAL FOAM DENGAN EGG YOLK SEBAGAI FOAMING AGENT. Undergraduate thesis, Sriwijaya University.

S, JAYA RIZKI SAPUTRA and Arifiin, Amir (2020) ANALISA HASIL METODE SOLUTION ANNEALING DAN NORMALIZING TERHADAP KEMAMPULASAN PADA MATERIAL ALLOY 800. Undergraduate thesis, Sriwijaya University.

SAPUTRA, HAFID (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:726/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

SAPUTRA, HAFID and Yani, Irsyadi (2020) ANALISA TEGANGAN DAN SRUKTUR GIRDER PADA OVERHEAD CRANE 10 TON MENGGUNAKAN AUTODESK INVENTOR 2016. Undergraduate thesis, Sriwijaya University.

SAPUTRA, M. IMAM and Yani, Irsyadi (2020) ANALISIS TEGANGAN PADA SISTEM DISTRIBUSI GAS PERPIPAAN BAWAH TANAH. Undergraduate thesis, Sriwijaya University.

SATYA, R.A. ALVIN TRI and Sipahutar, Riman (2020) PENGARUH UKURAN BAHAN BAKAR BATUBARA DAN PELET TONGKOL JAGUNG TERHADAP PRODUK SYNGAS PADA CO-GASIFIKASI SISTEM DOWNDRAFT. Undergraduate thesis, Sriwijaya University.

SETIAWAN, BUDI (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:521/OL/UN9/UPT.PUS.SIRK/2020. Sriwijaya University Library. (Submitted)

SETIAWAN, BUDI and Irsyadi, Yani (2020) ANALISIS DISTRIBUSI TEGANGAN, REGANGAN, DAN PERPINDAHAN PADA BEJANA TEKAN SILINDER TANGKI 216 MENGGUNAKAN PERANGKAT LUNAK AUTODESK SIMULATION MECHANICAL 2016. Undergraduate thesis, Sriwijaya University.

SETIAWAN, DWI and Mohruni, Amrifan Saladin (2020) PERANCANGAN ROLLER UNTUK PROSES PENGGILINGAN TEBU DENGAN STUDI KASUS PADA INSTALLED MILLING MACHINE DI PABRIK GULA CINTA MANIS. Undergraduate thesis, Sriwijaya University.

SETIAWAN, EVAN (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:652/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

SIDEBANG, SAMUEL HASUDUNGAN and Thamrin, Ismail (2020) KAJI EKSPERIMENTAL PENGARUH METODE HOT MACHINING PADA PROSES PERMESINAN BUBUT AISI 4340 TERHADAP ENERGI SPESIFIK PEMOTONGAN DAN KEKASARAN PERMUKAAN. Undergraduate thesis, Sriwijaya University.

SIHOMBING, JULIFER YOGI PANOGARI and Hadi, Qomarul (2020) EFISIENSI DAN DAYA YANG DIBUTUHKAN PADA TUNGKU INDUKSI MAGNEIK UNTUK MENCAIRKAN LOGAM ALUMINIUM PADA TEMPERATUR750oC. Undergraduate thesis, Sriwijaya University.

SINAGA, MORRYS SP and Chandra, Hendri (2020) ANALISIS TEGANGAN PADA EXHAUST VALVE MOTOR HONDA SUPRA X 125CC MENGGUNAKAN SOFTWARE ABAQUS. Undergraduate thesis, Sriwijaya University.

SITORUS, DONNY SAHALA TUA and Yani, Irsyadi (2020) PENGEMBANGAN SISTEM IDENTIFIKASI DAN KLASIFIKASI PLASTIK JENIS PET, HDPE, DAN PP DENGAN METODE DETEKSI TEPI. Undergraduate thesis, Sriwijaya University.

SUHADA, REZA ANDRE (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1229/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

SUMADI, AHMAD (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1230/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

SYAHPUTRA, BRILLIANT and Puspitasari, Dewi and Ellyanie, Ellyanie (2020) STUDI EKSPERIMENTAL PENGUKURAN EMISI GAS BUANG BAHAN BAKAR BATU BARA PADA CEROBONG DENGAN DAN TANPA MENGGUNAKAN FLOW STRAIGHTENER. Undergraduate thesis, Sriwijaya University.

SYAHRIZAL, EDO (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:1190/OL/UN9/UPT.PUS.SIRK/7.2020. Sriwijaya University Library. (Submitted)

SYAHRIZAL, EDO (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2404/OL/UN9/UPT.PUS.SIRK/9.2020. Sriwijaya University Library. (Submitted)

SYAHRIZAL, EDO and Yanis, Muhammad and Basri, Hasan (2020) STUDI KUALITAS SKAFOLD BERBAHAN PLA HASIL PRODUKSI MESIN CETAK 3D TIPE FDM DENGAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Sofijan, Armin and HIDAYATI, BAITI (2020) Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Conference Series: Materials Science and Engineering 620:012056, 909 (012032). pp. 1-8. ISSN 1757-8981

Sipahutar, Riman and Pratiwi, Diah Kusuma and Darmawi, Darmawi and Bizzy, Irwin and HIDAYATI, BAITI (2020) Analysis of Upgrading Process of South Sumatera Low Rank Coal. Journal of Physics: Conference Series, 1500 (012026). pp. 1-7. ISSN 1742-6596

Sipahutar, Riman and Pratiwi, Diah Kusuma and Darmawi, Darmawi and Bizzy, Irwin and Hidayati, Baiti (2020) Analysis of Upgrading Process of South Sumatera Low Rank Coal(Similarity). IOP Publishing.

Sjahruddin, Charles and Bizzy, Irwin (2020) PENGARUH PENINGKATAN EFISIENSI PEMASANGAN HEATSINK PADA PANEL PHOTOVOLTAIC TIPE POLYCRYSTALLINE. Jurnal Rekayasa Mesin, 20 (2). pp. 1-4. ISSN 1411 - 6553

Sjahruddin, Charles and Bizzy, Irwin (2020) PENGARUH PENINGKATAN EFISIENSI PEMASANGAN HEATSINK PADA PANEL PHOTOVOLTAIC TIPE POLYCRYSTALLINE(Similarity). Jurusan Teknik Mesin Fakultas Teknik Unsri.

Sofijan, Armin and Nawawi, Zainuddin and Suprapto, Bhakti Yudho and Sipahutar, Riman and Bizzy, Irwin (2020) Performance Evaluation Solar Charge Controller on Solar Power System Home-Based SPV Amorphous 80 Watt-peak. Journal of Physics: Conference Series, 1500 (012004). pp. 1-10. ISSN 1742-6596

TAIHITU, AHMAD ADDINA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2691/OL/UN9/UPT.PUS.SIRK/10.2020. Sriwijaya University Library. (Submitted)

TAQWIN, WAHYU AHSANI (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor: 101/UN9/UPT.PUS.SIRK/2020. Sriwijaya University Library. (Submitted)

TAUFIQURRAHMAN, FATA and Sipahutar, Riman (2020) ANALISA PENGARUH VARIASI BEBAN TERHADAP KINERJA TURBIN GAS PLTG CNG JAKABARING. Undergraduate thesis, Sriwijaya University.

THUFAIL, MUHAMMAD IQBAL MAITSA and Astuti, Astuti (2020) PENGARUH PARTIKEL Al2O3 KONSENTRASI 0,1%, 0,3% 0,5% TERHADAP KOEFISIEN PERPINDAHAN KALOR PADA DOUBLE PIPE HEAT EXCHANGER DENGAN PIPA CIRCULAR 4 INCH DAN 0,5 INCH. Undergraduate thesis, Sriwijaya University.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) Similarity_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) The effect of the annealing process and mold variations on failure time of CuZncast alloy by dynamic load. WARSE.

VALENTINO, ANDETA and Bayin, Darmawi (2020) PENGARUH JARAK CELAH TERHADAP LAJU KOROSI CELAH PADA BAJA KARBON SEDANG DAN ALUMINIUM 1100. Undergraduate thesis, Sriwijaya University.

WANDA, WANDA (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:644/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

WANDA, WANDA and Yani, Irsyadi (2020) SIMULASI PENGARUH TEMPERATUR TERHADAP KARAKTERISTIK MATERIAL AISI 4340 MENGGUNAKAN SOLIDWORKS. Undergraduate thesis, Sriwijaya University.

WIJAYA, BUYUNG (2020) SURAT KETERANGAN BEBAS PUSTAKA Nomor:723/OL/UN9/UPT.PUS.SIRK/6.2020. Sriwijaya University Library. (Submitted)

WIJAYA, BUYUNG and Arifin, Amir (2020) PERANCANGAN MESIN POLISH SEDERHANA UNTUK PROSES METALOGRAFI. Undergraduate thesis, Sriwijaya University.

WIRANDHA, ERICK and Puspitasari, Dewi and Ellyanie, Ellyanie (2020) STUDI EKSPERIMENTAL PENGARUH POSISI VERTIKAL FLOW STRAIGHTENER TERHADAP PROFIL KECEPATAN ALIRAN GAS BUANG PADA SAMPLING POINT CEROBONG. Undergraduate thesis, Sriwijaya University.

YANDRI, FAKHRI and Utami, Nurhabibah Paramitha Eka (2020) PENGARUH VARIASI DIMENSI CETAKAN LOGAM TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SCRAP DENGAN POLA CIRCLE MOLD. Undergraduate thesis, Sriwijaya University.

YUNUS, MUHAMMAD and Abidin, Zainal (2020) ANALISIS TEGANGAN, REGANGAN DAN PERPINDAHAN BUCKET EXCAVATOR UNIT PC.320 PT. TRAKINDO UTAMA MENGGUNAKAN PROGRAM ANSYS. Undergraduate thesis, Sriwijaya University.

ZANKULANI, AHMAD FARIZI and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN KERAMIK BERBENTUK DIAMOND MOLD TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.