Items where Division is "21101-Mechanical Engineering (S2)" and Year is 2019

Group by: Creators | Item Type | No Grouping
Number of items: 113.

Article

Bayin, Darmawi (2019) Hasil Ithenticate dan Peer Review Prof. Dr. Kuncoro Diharjo A NEW ROTOR BLADE FOR LOW CURRENT RIVER WATERWHEEL SUPPORTING THE ENERGY PROCUREMENT IN THE COUNTRYSIDE OF INDONESIA. International Journal of Science and Research (IJSR), 8 (3). pp. 239-242. ISSN 2319-7064

Mohruni, Amrifan Saladin and ZAHIR, MUHAMMAD and Yanis, Muhammad and Sharif, Safian and Yani, Irsyadi (2019) Investigation of Finite Element Modelling on Thin-Walled Machining of Ti6Al4V using DEFORM-3D. Journal of Physics: Conference Series, 1167. 012002. ISSN 1742-6588

Oktarini, Devie and Mohruni, Amrifan Saladin and Sharif, Safian and Yanis, Muhammad and Madagaskar, Madagaskar (2019) Optimum Milling Parameters of Sugarcane Juice Production Using Artificial Neural Networks (ANN). Journal of Physics: Conf. Series, 1167 (1). pp. 1-11. ISSN 17426588, 17426596

Resti, Yulia and Mohruni, Amrifan Saladin and Rosdiana, T and Zayanti, D.A. (2019) Study in Development of Cans Waste Classification System Based on Statistical Approaches. Journal of Physics: Conference Series, 1198 (9). pp. 1-6. ISSN 17426588, 17426596

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) OPTIMUM PERFORMANCE OF GREEN MACHINING ON THIN WALLED TI6AL4V USING RSM AND ANN IN TERMS OF CUTTING FORCE AND SURFACE ROUGHNESS. Jurnal Teknologi, 81 (6). pp. 51-60. ISSN 0127-9696

Zaharuddin, M F A and Yunos, P A A and Jiyoung, Y and Mohruni, Amrifan Saladin and Yani, Irsyadi and Yanis, Muhammad (2019) Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. Journal of Physics: Conference Series, 1198 (4). pp. 1-10. ISSN 17426588, 17426596

Thesis

BEKTI, KONA'AH and Yani, Irsyadi (2019) PENGEMBANGAN SISTEM IDENTIFIKASI DAN KLASIFIKASI JENIS SAMPAH PLASTIK DENGAN METODE ARTIFICIAL NEURAL NETWORKS(ANN). Master thesis, Sriwijaya University.

BUNYAMIN, BUNYAMIN and Kaprawi, Kaprawi and Puspitasari, Dewi (2019) PENGEMBANGAN FAKTOR KOREKSI ORIFICE FLOWMETER ALIRAN GAS BUMI DALAM PIPA. Master thesis, Sriwijaya University.

NUGRASYAH, AMRILLAH and Mohruni, Amrifan Saladin (2019) APPLICATION OF PRODUCT QUALITY ASSURANCE IN MANUFACTURE, CASE STUDY IN MECHANICAL ENGINEERING DEPARTMENT SRIWIJAYA UNIVERSITY. Master thesis, Sriwijaya University.

PRAKOSO, AKBAR TEGUH and Basri, Hasan and Mataram, Agung (2019) ANALISIS PENGARUH DEGRADASI DINAMIS TERHADAP KARAKTERISTIK MORFOLOGI DAN PERILAKU MEKANIS PERANCAH TULANG MAGNESIUM BERPORI. Master thesis, Sriwijaya University.

Patent

Hendra Hadiwijaya (2019) HAK CIPTA APLIKASI PENCATATAN BATUBATA BAGI UKM BERBASIS ANDROID. EC00201938973.

Dr.Ir. Darmawi, MT (2019) PENGHEMAT ENERGI VERTIKAL. IDP000065109.

Teaching Resource

Basri, Hasan (2019) RPS MESIN FLUIDA LANJUT. [Teaching Resource]

Basri, Hasan (2019) RPS SISTEM PEMBANGKIT DAYA. [Teaching Resource]

Basri, Hasan (2019) RPS TRIBOLOGI LANJUT. [Teaching Resource]

Bayin, Darmawi (2019) RPS ENERGI BERKELANJUTAN. [Teaching Resource]

Chandra, Hendri (2019) RPS PERLAKUAN PANAS DAN PERMUKAAN. [Teaching Resource]

Mataram, Agung (2019) RPS MEKANIKA LANJUT. [Teaching Resource]

Mataram, Agung (2019) RPS TEKNIK DAN MANAJEMEN PERAWATAN MESIN. [Teaching Resource]

Mataram, Agung (2019) RPS TEKNIK DAN MANAJEMENPERAWATAN MESIN. [Teaching Resource]

Mataram, Agung (2019) RPSMATERIAL KOMPOSIT. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS DINAMIKA SISTEM. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS KOROSI DAN PENGENDALIANNYA. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS MATERIAL TEKNIK LANJUT. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS TEKNIK PENGECORAN LANJUT. [Teaching Resource]

Pratiwi, Diah Kusuma and Chandra, Hendri and Mataram, Agung (2019) ANALISA KERUSAKAN MATERIAL. [Teaching Resource]

Sahim, Kaprawi (2019) RPS MATEMATIKA TERAPAN DAN PEMROGRAMAN. [Teaching Resource]

Sipahutar, Riman (2019) RPS DESAIN DAN OPTIMASI SISTEM TERMAL. [Teaching Resource]

Sipahutar, Riman (2019) RPS SISTEM MOTOR BAKAR DAN PROPULSI. [Teaching Resource]

Vidian, Fajri (2019) RPS SISTEM REFRIGRASI DAN KRIOGENIKA. [Teaching Resource]

Yani, Irsyadi (2019) RPS OPTIMASI PERANCANGAN MESIN. [Teaching Resource]

Yani, Irsyadi (2019) RPS SIMULASI PERANCANGAN MESIN. [Teaching Resource]

afriansyah, afriansyah (2019) Tugas mata kuliah automatisasi system manufaktur bab 4. [Teaching Resource] (Unpublished)

Other

Arifin, Amir and Mataram, Agung (2019) Optimization of Angular Distortion on Weld Joints Using Taguchi Approach (Similarity). UKM, Malaysia, UKM, Malaysia.

Arifin, Amir (2019) Application of RSM and ANN in Predicting Surface Roughness for Side Milling Process under Environmentally Friendly Cutting Fluid (Peer Review ). .. (Unpublished)

Arifin, Amir (2019) The Fabrication Porous hydroxyapatite Scaffold Using Sweet Potato Starch as a Natural Space Holder (Peer Review). IOP Publisher. (Unpublished)

Chandra, Hendri (2019) Similarity of Mechanical fracture characterization of rice kernel under milling process. Ithenticate Universitas sriwijaya.

Chandra, Hendri and Mataram, Agung and Utami, Nurhabibah Paramitha Eka (2019) Similarity of The characterization of mechanical property and fatigue life of betel-falm fiber composite as envronment-friendly material. Ithenticate Universitas sriwijaya.

Darmawi, Darmawi (2019) ARSIP BUKTI KOMUNIKASI DENGAN EDITOR IJSR (INTERNATIONAL JOURNAL OF SCIENCE AND RESEARCH) UNTUK KARYA ILMIAH BERJUDUL: A NEW ROTOR BLADE FOR LOW CURRENT RIVER WATERWHEEL SUPPORTING THE ENERGY PROCUREMENT IN THE cOUNTRYSIDE OF INDONESIA. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) ARSIP BUKTI KOMUNIKASI DENGAN EDITOR MAJALAH FLYWHEEL UNTIRTA (SINTA 4)UNTUK KARYA ILMIAH BERJUDUL: THE EFFECT OF GAP DISTANCE ON THE CORROSION RATE OF SS400 STEEL AND C27000 BRASS. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) ARSIP BUKTI KORESPONDENSI PENULIS DENGAN EDITOR JURNAL iNTERNATIONAL jOURNAL OF SCIENCE AND RESEARCH UNTUK KARYA ILMIAH BERJUDUL: GEOTHERMAL ENERGY UTILIZATION AND ENVIRONMENT IMPACT PREVENTION ON SINGLE STEAM CYCLE SYSTEM CASE STUDY: PLTP ULUBELU - LAMPUNG. Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) BUKU AJAR: PELAPISAN LOGAM (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) EMAIL GABUNGAN DARI BERBAGAI JURNAL dan CONFERENCE TINGKAT INTERNATIONAL UNTUK MEMINTA SAYA MENJADI REVIEWER MEREKA. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) The Efficiency Decrement of the Spiral Pump Regarding the Pipe Cpil Diameter (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Geothermal Energy Utilization and Environment Impact Prevention on Single Flash Steam Cycle System Case Study: PLTP Ulubelu, Lampung (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Hambatan dan Tantangan Pemanfaatan Aliran Air pada Saluran Air Irigasi Sekunder untuk Memompakan Air ke Lahan Persawahan Sebagai Dukungan Bagi Pengelolaan Lahan Sub-optimal di Desa Bangun sari Telang II- Banyuasin (Similarity). University Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Hydro Energy and Its Sginificat Role in the Future of Indonesian Energy Case Study: Telang II-Banyuasin (Similarity). University Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Hydro Energy and Its Signifcant Role in the Future of Indonesian Energy - Case Study Telang II - Banyuasin (Peer Review). Universitas Sebelas Maret, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Hydropower di lingkungan Negara-negara ASEAN dan Perspektif Pengmbangan Energi Kedepan (Peer Review). Universitas Sebelas Maret. (Unpublished)

Darmawi, Darmawi (2019) Indonesia Between ASEAN Countries and the World In Hydroelectricity (Similarity). University Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Indonesia Between ASEAN Countries and the World in Hydroelectricity (Peer Review). Universitas Sebelas Maret, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Korosifitas Air Rawa Dalam Konteks Hitungan Kerugian Ekonomis Terhadap Infrastruktur Berbahan Baku Baja di Lingkungan Air Rawa (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) MEMBERIKAN PEMBIMBINGAN AKADEMIK KEPADA MAHASISWA PADA JURUSAN TEKNIK MESIN FT UNSRI KAMPUS INDRALAYA SEMESTER GANJIL 2019/2020. Faculty of Engineering Sriwijaya University. (Unpublished)

Darmawi, Darmawi (2019) Membaca Dinamika Pembentukan Lapisan Pasif Dipermukaan Logam Melalui Data Potensial Antarmuka "Half Cell" dengan Elektroda Standard Cu/CuSO4 (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Mesin Pemipih Purun Bagi Kelompok Pengrajin Purun di Desa Menang Raya Kecamatan Pedamaran, Kabupaten OKI (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) A New Rotor Blade for Low Current River Waterwheel Supporting the Energy Procurement in the Countryside of Indonesia (Peer Review). Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) A New Rotor Blade for Low Current River Waterwheel Supporting the Energy Procurement in the Countryside of Indonesia (Similarity). Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Our Future Challenge: Change the Waste into Energy (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Pelapisan Logam (Similarity). Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Pengaruh Fraksi Penguat Pasir Terhadap Sifat Mekanik Polimer Matrik Komposit (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Perbedaan Struktur Mikro, Kekerasan dan Ketangguhan baja HQ 705 Bila Diquench dan Ditemper Pada Media Es, Air dan Oli (Similarity). Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Pico Hydropower Application on Tidal Irrigation Canal Supporting The Indonesian Agricultural Activities Case Study: Telang II - Banyuasin (Similarity). University Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Pico Hydropower Application on Tidal Irrigation Canal Supporting the INdonesian Agricultural Activities Case Study: Telang II-Banyuasin (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) RENEWABLE ENERGY AND HYDROPOWER UTILIZATION TENDENCY WORLDWIDE (Peer Review). Faculty of Engineering Sriwijaya University. (Unpublished)

Darmawi, Darmawi (2019) The Records of The Powers Produce of Solar Cell of 50 WP AS Long as March 2016 at Kenten Area (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) The Records of The Powers Produce of Solar Cell of 50 WP AS Long as March 2016 at Kenten Area (Similarity). University Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Renewable Energy and Hydropower Utilization Tendency Worldwide (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Renewable Energy and Hydropower Utilization Tendency Worldwide (Similarity). Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) SK MENGUJI DAN MENILAI KARYA TULIS ILMIAH MAHASISWA PADA LOMBA KARYA TULIS ILMIAH (lkti) MAHASISWA TINGKAT FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA TAHUN 2019. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) SK MENGUJI SEMINAR PROPOSAL TESIS MAHASISWA S2 JURUSAN MESIN FAKULTAS TEKNIK UNSI A.N. BUNYAMIN PADA TANGGAL 18 OKTOBER 2019. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) SK MENGUJI TESIS MAHASISWA S2 PADA JURUSAN MESIN FAKULTAS TEKNIK UNSRI A.N. BUNYAMIN PADA TANGGAL 22 NOPEMBER 2019. Fakultas Teknik, Universitas Sriwijaya, Indralaya.

Darmawi, Darmawi (2019) SK PENGUJI DAN PENILAI PADA PEMILIHAN MAHASISWA BERPRESTASI (MAWAPRES) TINGKAT FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA pada tahun 2019. Fakultas Teknik, Universitas Sriwijaya, Indralaya. (Unpublished)

Darmawi, Darmawi (2019) Scoopy Blade for Low Current River Waterwheel Supporting the Eneegy Needs in The Rural Areas of Indonesia (Similarity). Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2019) Scoopy Blade for Low Current River Waterwheel Supporting the Energy Needs in the Rural Areas of Indonesia (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Tempering Terhadap Parang Hasil Tempa Tradisional untuk Meningkatkan Keliatan (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Tidak Current Turbine and Related Development Problems for Indonesia (Peer Review). Universitas Tarumanegara, Jakarta. (Unpublished)

Darmawi, Darmawi (2019) Usaha Pencetakan Briket Batubara Sebagai Wahana Pengembangan Usaha Kecil Menengah Rakyat Sumatera Selatan (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) W/C Ratio, Permeabilitas Beton dan Faktor Subjectif Pengerjaan dalam Konteks Kesehatan Baja Tulangan (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Darmawi, Darmawi (2019) Waste Landfill and the waste of Comtamination Impact on Corrosion Rate Low of Carbon Steel (Peer Review). Universitas Sebelas Maret, Solo. (Unpublished)

Mataram, Agung (2019) Characteristics of polyethersulfone membranes with the addition of silver nitrate; tensile strength, microstructure, and permeability (Corresponding Auhor). American Institute of Physics, United States.

Mataram, Agung (2019) Characteristics of polyethersulfone membranes with the addition of silver nitrate; tensile strength, microstructure, and permeability (Similarity). American Institute of Physics, United States.

Mataram, Agung (2019) The Effect Of Magnetic Field And Heater In Biodiesel Fuel Line Toward Torque, Power, and Fueld Consumption Of One Cylinder Four Stroke Diesel Engine At Maximum Load (Similarity). IOP Publishing Ltd., United Kingdom.

Mataram, Agung (2019) The Effect of the Welding Direction on Fatigue Crack Propagation Rate of Welded Shell Kiln (Similarity). IOP Publishing Ltd., United Kingdom.

Mataram, Agung (2019) Finite Element Failure Analysis on 34crnimo6 Firing Pin in Fatigue Fracture (Koresponding). IOP Publishing Ltd., United Kingdom.

Mataram, Agung (2019) Finite Element Failure Analysis on 34crnimo6 Firing Pin in Fatigue Fracture (Similarity). IOP Publishing Ltd., United Kingdom.

Mataram, Agung (2019) PENJERNIHAN AIR LIMBAH BINATU (LAUNDRY) MENGGUNAKAN ALAT SEDERHANA (Similarity). Unsri, Palembang.

Mataram, Agung (2019) Surat Keputusan Rektor No 0755/UN9.FT/TU.SK/2019 Sebagai Penguji Doktoral an. Muhammad Yanis. Universitas Sriwijaya, Inderalaya. (Unpublished)

Mataram, Agung (2019) Utilization of Fly Ash For the Pretreatment Process of Rubber Industry Wastewater Processing Using Hybrid Membrane UF-RO (Similarity). pps unsri, Palembang.

Mataram, Agung (2019) The characterization of mechanical property and fatigue life of betel-falm fiber composite as environmentally-friendly material (Similarity). IOP Publishing Ltd., United Kingdom.

Mataram, Agung and Nasir, Subriyer (2019) Physical and mechanical properties of membrane polyvinilidene flouride with the addition of silver nitrate (Corresponding Author). Penerbit UTM Press, Malaysia.

Mataram, Agung and Nasir, Subriyer (2019) Physical and mechanical properties of membrane polyvinilidene flouride with the addition of silver nitrate (Similarity). Penerbit UTM Press, Malaysia.

Mgs, Halim and Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2019) Similarity of Sustainable Development of Lubricator to Optimization Process of Lubrication in Wire Rope Sling. Ithenticate Universitas sriwijaya. (Submitted)

Mohruni, Amrifan Saladin (2019) Ithenticate_Application of RSM and ANN in Predicting Surface Roughness for Side Milling Process under Environmentally Friendly Cutting Fluid. IOP Publishing Ltd, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Cutting force prediction when green machining of thin-walled Ti-6Al-4V under dry and MQL-cutting using response surface methodology and artificial neural networks-algorithm. American Institute of Physics, USA.

Mohruni, Amrifan Saladin (2019) Ithenticate_High speed end milling of cobalt chromium molybdenum alloy using solid carbide tool under MQL condition. American Institute of Physics.

Mohruni, Amrifan Saladin (2019) Ithenticate_Innovations in Manufacturing for Sustainability. Springer Nature, Switzerland.

Mohruni, Amrifan Saladin (2019) Ithenticate_Investigation of Finite Element Modelling on Thin-Walled Machining of Ti6Al4V using DEFORM-3D. IOP Publishing Ltd, Switzerland.

Mohruni, Amrifan Saladin (2019) Ithenticate_Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. IOP Publishing Ltd, USA.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimization of Surface Roughness Using RSM and ANN Modelling on Thin-Walled Machining Under Biodegradable Cutting Fluids. ARPN Publishers.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimum Milling Parameters of Sugarcane Juice Production Using Artificial Neural Networks (ANN). IOP Publishing Ltd.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimum Performance of Green Machining on Thin Walled Ti6al4v Using RSM and ANN in Terms of Cutting Force and Surface Roughness. Penerbit UTM Press, Johor Bahru, Malaysia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Production Planning and Control System with Just in Time and Lean Production A Review. Program Studi Magister Teknik Mesin Universitas Sriwijaya.

Mohruni, Amrifan Saladin (2019) Ithenticate_Study in Development of Cans Waste Classification System Based on Statistical Approaches. IOP Publishing Ltd, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2019) Reviewer_MACHINABILITY CHARACTERISTICS IN POWDER MIXED ELECTRICAL DISCHARGE MACHINING (PMEDM) OF AISI D2 HARDENED STEEL_Jurnal Teknologi. Penerbit UTM Press, Johor Bahru, Malaysia. (Submitted)

Mohruni, Amrifan Saladin and Yanis, Muhammad and Sharif, Safian and Yani, Irsyadi (2019) Corresponding Author_Optimum Performance of Green Machining on Thin Walled Ti6al4v Using RSM and ANN in Terms of Cutting Force and Surface Roughness. Penerbit UTM Press, Johor Bahru, Malaysia.

Nukman, Nukman (2019) Similarity result of_THE EFFECT OF FINE COAL INTUBE MOLDSWHEN POURING ALUMINUM ALLOY 6061 ON WEAR RATE AND HARDNESS VALUE. GEOMATE International Society. (Submitted)

Puspitasari, Dewi (2019) Bukti Korespondensi_Effect of Savonius blade height on the performance of a hybrid Darrieus-Savonius wind turbine. UMP Press.

Ramli, A S and Sharif, Safian and Said, A Y M and Yusop, M S M and Karim, Zailani and Mohruni, Amrifan Saladin (2019) Ithenticate_Investigation of tool entry strategy when pocket milling titanium alloy, Ti-6Al-4V under wet condition. American Institute of Physics.

Susanti, Betty (2019) Anggota Penguji - Afriza Arni Putri. Faculty of Engineering Sriwijaya University. (Unpublished)

Susanti, Betty (2019) Anggota Penguji - Astri Utami. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

TEKNIK, FAKULTAS (2019) SK MENGAJAR 0071/UN9.FT/TU.SK/2019 PROGRAM STUDI MAGISTER TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA SEMESTER GENAP TAHUN AKADEMIK 2018/2019. Faculty of Engineering, Sriwijaya University, Palembang, Indonesia.

afriansyah, afriansyah (2019) Tugas kuliah automatisasi system manufaktur bab 3. Universitas Sriwijaya, palembang. (Unpublished)

afriansyah, afriansyah (2019) Tugas mata kuliah otomatisasi sistem manufaktur oleh Afriansyah 03032681822004. Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

This list was generated on Thu Mar 28 14:52:17 2024 WIB.