ANALISA DISTRIBUSI TEMPERATUR CHIP PADA PROSES PEMBUBUTAN DENGAN PENDINGIN KRIOGENIK MENGGUNAKAN FEM-AUTODESK MECHANICAL SIMULATION 2016

SAPUTRA, TRYATMOJO and Mohruni, Amrifan Saladin and Yanis, Muhammad (2017) ANALISA DISTRIBUSI TEMPERATUR CHIP PADA PROSES PEMBUBUTAN DENGAN PENDINGIN KRIOGENIK MENGGUNAKAN FEM-AUTODESK MECHANICAL SIMULATION 2016. Undergraduate thesis, Sriwijaya University.

	Text RAMA_21201_NIM_0011096407_01_front_ref.pdf - Accepted Version Available under License Creative Commons Public Domain Dedication. Download (459kB)
	Text RAMA_21201_NIM_0011096407_02.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (555kB) | Request a copy
	Text RAMA_21201_NIM_0011096407_03.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (1MB) | Request a copy
	Text RAMA_21201_NIM_0011096407_04.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (1MB) | Request a copy
	Text RAMA_21201_NIM_0011096407_05.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (159kB) | Request a copy
	Text RAMA_21201_NIM_0011096407_06_ref.pdf - Bibliography Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (133kB) | Request a copy
	Text RAMA_21201_NIM_0011096407_07_lamp.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (1MB) | Request a copy

Abstract

Manufacturing machine is the most widely used process in any type of metal cutting or chip machining, it is known that the heat generated during the process is an important factor affecting the performance of the cutting tool.The mechanical energy required for the chip formation is converted into heat,then the cutting temperature is in the primary deformation zone and the secondary zone. The temperature depends on the material of the boring tool, the material of unit, and the process parameters such as cutting speed, cutting depth, chip angle, and the movement. High temperature can influence the damage of cutting equipment. Cryogenic can reduce the heat generated by friction of workpiece and boring tool. Cutting fluid used in metal cutting process uses SCCO2, the temperature is below -80o (Rahim et al.,2016) to absorb the heat on chip. Therefore it is necessary to analyze the effect of chip distribution using titanium with SCCO2 coolant uses autodesk simulation mechanical 2016 software and to determine boundary condition to the given load. Based on the simulation results, the value of temperature at the chip during the process of titanium. Ti-6Al-4V at the length of 20mm uses boring tool Tungsten Karbida, where the angle 10o generates the temperature 547oC and the final temperature -43,4oC on the chip formation with conduction calculation Heat Source 22,40 W. The chip angle 10o needs 20 seconds with analysis the type of transient heat transfer.

Item Type:	Thesis (Undergraduate)
Uncontrolled Keywords:	Cutting Temperature, Cryogenic Machining, FEM, Ti-6Al-4V, Distribution on Chip, Autodesk Mechanical Simulation 2016
Subjects:	T Technology > TJ Mechanical engineering and machinery > TJ1-1570 Mechanical engineering and machinery T Technology > TJ Mechanical engineering and machinery > TJ1125-1345 Machine shops and machine shop practice > TJ1185 General works Machine tools and machining Including errors in workmanship, accuracy of fitting, etc. > TJ1185.A685 Machining. Manufacturing processes
Divisions:	03-Faculty of Engineering > 21201-Mechanical Engineering (S1)
Depositing User:	Prof Amrifan Saladin Mohruni
Date Deposited:	09 Jul 2019 05:49
Last Modified:	09 Sep 2019 06:56
URI:	http://repository.unsri.ac.id/id/eprint/50

Actions (login required)

View Item