PENGARUH PARAMETER PEMOTONGAN TERHADAP DAYA PEMESINAN PADA PROSES FREIS MENGGUNAKAN CAIRAN PEMOTONGAN MINYAK KELAPA

AFRIANSYAH, MUHAMMAD ADAM and Yanis, Muhammad (2023) PENGARUH PARAMETER PEMOTONGAN TERHADAP DAYA PEMESINAN PADA PROSES FREIS MENGGUNAKAN CAIRAN PEMOTONGAN MINYAK KELAPA. Undergraduate thesis, Sriwijaya University.

	Text RAMA_21201_03051181823107.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (2MB) | Request a copy
	Text RAMA_21201_03051181823107_TURNITIN.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (4MB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_01_front_ref.pdf - Accepted Version Available under License Creative Commons Public Domain Dedication. Download (576kB)
	Text RAMA_21201_03051181823107_0028027004_02.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (667kB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_03.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (270kB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_04.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (415kB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_05.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (9kB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_06_ref.pdf - Bibliography Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (75kB) | Request a copy
	Text RAMA_21201_03051181823107_0028027004_07_lamp.pdf - Accepted Version Restricted to Repository staff only Available under License Creative Commons Public Domain Dedication. Download (1MB) | Request a copy

Abstract

The amount of force and cutting power is information that is very necessary in machine tool planning, because this is the starting point for every planning calculation and analysis for every type of machine tool. This study aims to analyze the optimization of the influence of parameters on machining power (N) in the face milling process by administering a cutting fluid using coconut oil mixed with nanoparticles using the Minimum Quantity Lubrication (MQL) technique and analyze the required machining power during the machining process in order to determine the amount of power consumption required for a machining process. The output parameter is machining power. The milling machining parameters that are varied are cutting speed with a variation value of (16.33, 31.09 and 40.82) m/min, feeding motion with a variation value of (0.031, 0.051, and 0.066) mm/tooth, and axial feeding depth with a variation value of (0.5, 0.75, and 1.25) mm. The L9(33 ) orthogonal matrix of Taguchi's experimental design, signal-to-noise ratio, and analysis of variance (ANOVA) were used to analyze the impact of these machining parameters. The analysis performed shows the optimal combination of machining parameters to produce the best surface roughness is low cutting speed (16,33 m/min), low feeding motion (0,051 mm/tooth), and small depth of cut (0,75 mm).

Item Type:	Thesis (Undergraduate)
Uncontrolled Keywords:	Daya pemesinan, Metode Taguchi dan Nanopartikel
Subjects:	T Technology > TJ Mechanical engineering and machinery > TJ163.13-163.25 Power resources T Technology > TJ Mechanical engineering and machinery > TJ163.26-163.5 Energy conservation
Divisions:	03-Faculty of Engineering > 21201-Mechanical Engineering (S1)
Depositing User:	Muhammad Adam V
Date Deposited:	28 Jul 2023 07:43
Last Modified:	28 Jul 2023 07:43
URI:	http://repository.unsri.ac.id/id/eprint/123453

Actions (login required)

View Item