Tahir, Mahmood Md. and Lawan, Mustapha Muhammad and Saggaff, Anis and Mirza, Jahangir (2016) Influence of Shear Connector Size on Ultimate Strength in Composite Construction with Cold-Formed Steel Channel Lipped Section. Review of Industrial Engineering Letters, 3 (1). pp. 1-10. ISSN 2408-9427
Preview |
Text
2016ShearconnectorsizeRIEL.pdf Download (1MB) | Preview |
Abstract
In conventional composite construction for buildings and bridges, Hot-Rolled Steel (HRS) section is well known to be used. The composite action is usually achieved by using conventional headed stud shear connectors. However, for Cold-Formed Steel (CFS) section, the use of headed stud shear connectors is not feasible as the section is very thin and incapable to be weld. Therefore, a suitable shear connection system of bolt and nut is proposed in this study by varying the size of the bolted shear connectors. This paper presents the prospect of using a bolt and nut as shear connector that could be well-suited with CFS section when integrated in Self-Compacting Concrete (SCC). The experimental test comprised of push-out and was conducted to determine the strength and ductility of the proposed bolted shear connectors as used in composite construction. Eight push-out test specimens of bolted shear connector size consist of M12, M14 and M16 of grade 8.8 were fabricated and tested to failure. The experimental results show that the bolted shear connectors used to possess good shear resistance capacity. Influence of varying the size of the bolted shear connectors was investigated. The results show that the size of bolted shear connectors influenced the ultimate strength capacity of the shear connectors significantly.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Shear Connector Size, Cold-Formed Steel Lipped, Composite Construction, Strength Capacity, Push-out Test |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) > TA1-2040 Engineering (General). Civil engineering (General) > TA151 Handbooks, manuals, etc. Cf. TA332 Pocketbooks, tables, etc. (Engineering mathematics) Cf. TA685 Tables of structural shapes and sections of steel and iron" |
| Divisions: | 03-Faculty of Engineering > 22101-Civil Engineering (S2) |
| Depositing User: | Prof Anis Saggaff |
| Date Deposited: | 13 Aug 2020 16:32 |
| Last Modified: | 13 Aug 2020 16:32 |
| URI: | http://repository.unsri.ac.id/id/eprint/33084 |
Actions (login required)
 |
View Item |