Idris, Yakni and Dewi, Ratna and Sutejo, Yulindasari and Agil Al Munawar, Said (2021) BEARING CAPACITY OF FOLDED PLATE FOUNDATIONS IN CLAY SOIL (Peer Review). Fakultas Teknik Universitas Sriwijaya. (Unpublished)
Preview |
Text
(4) Peer Review Journal of Applied Engineering Science.pdf Download (993kB) | Preview |
Abstract
The design of a foundation is inseparable from the type and strength of the soil, for example, soft or medium clay soils have poor properties for structures due to their low bearing capacity. Therefore, it is necessary to modify the model of a foundation to increase its bearing capacity and one of the popular methods is the application of folded plate on a flat foundation with angles and flange lengths on both sides. Therefore, this research presented its application at different flange lengths of 0.5B, 0.75B, 1B, 1.25B, and 1.5B where B is the width of the flat plate and the results showed the bearing capacity of the folded plate was higher than the flat foundation. Moreover, an increment in the folded length led to a bigger ultimate load and smaller settlement but the ultimate load and settlement were observed to be almost constant at over 1B. This means the optimum variation where the flange length is equal to the foundation width is 1B and it was observed to have increased by 129.52 % using the Tangent Method and 148.4 7% with Butler Hoy Method. Meanwhile, the lowest settlement factor for the folded plate foundation was 0.22 with the highest bearing capacity of 61.19 kN/m2
| Item Type: | Other |
|---|---|
| Subjects: | |
| Divisions: | 03-Faculty of Engineering > 22101-Civil Engineering (S2) 03-Faculty of Engineering > 22201-Civil Engineering (S1) |
| Depositing User: | Ir. Yakni Idris, MSc |
| Date Deposited: | 27 Jan 2022 05:14 |
| Last Modified: | 27 Jan 2022 05:14 |
| URI: | http://repository.unsri.ac.id/id/eprint/62170 |
Actions (login required)
 |
View Item |