Items where Subject is "TP1180.P67.A38 Polyolefins. Nanocomposites (Materials) Fillers (Materials) TECHNOLOGY & ENGINEERING / Material Science TECHNOLOGY & ENGINEERING / Textiles & Polymers"

Article

Bowo, Aidil Fitra and Saloma, Saloma and Nurjannah, Siti Aisyah and Juliantina, Ika (2020) Sulfate Resistance Of Polymer Light-Weight Concrete With Variation Of Epoxy Resin. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 9 (5). pp. 45-49. ISSN 2277-8616

Edianta, Jaya and Cakra Satya, Octavianus and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) REVIEW OF ION IMPRINTED POLYMERS NANOFIBER WITH TECHNOLOGY ELECTROSPINNING: AN ADVANCED MATERIALS FOR REMOVAL OF HEAVY METAL IONS. Journal of Chemical Technology and Metallurgy, 58 (4). pp. 731-748. ISSN (e) 1314-7978; (p) 1314-7471

Edianta, Jaya and Cakra Satya, Octavianus and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) Review of Ion Imprinted Polymers Nanofiber With Technology electrospinning: An Advanced Materials for Removal of Heavy Metal Ions. Journal of Chemical Technology and Metallurgy, 58 (4). pp. 731-748. ISSN e-ISSN 1314-7978 ; p-ISSN 1314-7471

Mataram, Agung (2024) ANALISIS KARAKTERISTIK MEMBRAN PENGOLAHAN AIR DARI BAHAN POLYETHERSULFONE DENGAN PENAMBAHAN PERAK NITRAT. Austenit, 16 (1). pp. 55-62. ISSN : 2085-1286, 2622-7649

Mataram, Agung (2021) Analysis of Utilization of Pandand Fiber Biocomposite Materials as a Motorcycle Body Kit Using Impact Testing With Charpy Method (Article). IOP Conference Series: Materials Science and Engineering, 18 (6). pp. 61-68. ISSN 2278-1684

Mataram, Agung (2021) Comparison Analysis of Tensile Strength of Polyethersulfone (PES) Membrane by Titanium Dioxide and Polyvinylidene Fluoride (PVDF) Membrane by Titanium Dioxide (Article). IOP Conference Series: Materials Science and Engineering, 18 (2). pp. 1-5. ISSN 2278-1684

Mataram, Agung (2021) The Effect of Adding Wood Charcoal Powder and Coconut Shell Charcoal on Recycle Aluminum Alloy 6061 Against Hardness (Article). The Effect of Adding Wood Charcoal Powder and Coconut Shell Charcoal on Recycle Aluminum Alloy 6061 Against Hardness, 18. pp. 20-23. ISSN 2278-1684

Mataram, Agung (2022) Formation of POLYETHERSULFONE (PES) Membrane with Titanium Dioxide (TiO2) Reinforcement for Water Treatment Applications (Article). IOP Conference Series: Materials Science and Engineering, 19 (3). pp. 9-15. ISSN 2278-1684

Mataram, Agung (2022) Mechanical Properties membrane Polyethersulfone (PES) With Reinforcement Silver Nitrate (Article). IOP Conference Series: Materials Science and Engineering, 19 (5). pp. 32-38. ISSN 2278-1684

Mataram, Agung and Ismail, Ahmad Fauzi and Mohruni, Amrifan Saladin and Matsuura, T. (2014) An Investigation Effects of Electrospinning Parameters: Process Optimization By Application of Response Surface Methodology. Applied Mechanics and Materials, 660. pp. 140-144. ISSN 1660 9336

Tyastuti, Nur Padmi and Haryati, Sri and Nasir, Subriyer (2018) Fabrication of Thermoplastic Elastomers (TPE) by Using Emulsion Method as an Alternative Material For Vehicle Bumper Protector. Science and Technology Indonesia, 3 (4). pp. 151-156. ISSN 2580-4391

Book Section

Mataram, Agung (2018) Pembuatan, Karakterisasi, Optimalisasi dan pemanfaatan Polimer Membran Poliakrilonitrile untuk Penyaringan Air (Full Book). In: Pembuatan, Karakterisasi, Optimalisasi dan pemanfaatan Polimer Membran Poliakrilonitrile untuk Penyaringan Air. Unsri Press, Palembang, pp. 1-157.

Thesis

ABDULLAH, MUHAMMAD BAKRI and Mataram, Agung (2021) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYETHERSULFONE (PES) : KARAKTERISTIK, SIFAT MEKANIS, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ALFONSO, MUHAMMAD and Mataram, Agung (2021) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYVINYLIDENE FLUORIDE (PVDF) : KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ANISYA, NYAYU and Mataram, Agung (2019) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYVINYLIDENE FLUORIDE (PVDF) : KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ANUGRAH, SATRIA and Mataram, Agung (2021) KARAKTERISTIK MEMBRAN POLYETHERSULFONE (PES) DENGAN PENAMBAHAN TITANIUM DIOXIDE (TiO2) TERHADAP PENGUJIAN TARIK,STRUKTUR MIKRO, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ARYANTO, DESTU and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYETHERSULFONE (PES) DENGAN PENCAMPURAN TIMAH DIOKSIDA (SnO2): KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

AWALDI, KURNIAWAN and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYVINYLIDENE FLUORIDE(PVDF) DENGAN PENCAMPURAN TIN(IV) DIOXIDE(SnO2) : KARAKTERISTIK, SIFAT MEKANIS, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

AZZAHRI, OVI and Mataram, Agung (2023) PURIFIKASI LIMBAH AIR RUMAH TANGGA MENGGUNAKAN MEDIA MEMBRAN DENGAN CAMPURAN POLYVINYLIDENE FLUORIDE (PVDF) DAN TIMAH (SnO). Undergraduate thesis, Sriwijaya University.

BATRA, CAROLINA and Mataram, Agung (2023) PEMBENTUKAN MEMBRAN POLYVINYLIDENE FLUORIDE (PVDF) DAN TIMAH (SnO) UNTUK FILTRASI AIR LIMBAH RUMAH TANGGA. Undergraduate thesis, Sriwijaya University.

BURLIAN, M. ZAINAL and Mataram, Agung (2023) PEMBUATAN MEMBRAN POLYETHERSULFONE DENGAN PENCAMPURAN PERAK NITRAT UNTUK PENYARINGAN AIR LIMBAH RUMAH TANGGA. Undergraduate thesis, Sriwijaya University.

FATRIYANA, MAYA and Mataram, Agung and Yani, Irsyadi (2021) PEMBUATAN MEMBRAN POLYVINYLIDENE FLUORIDE (PVDF) - TITANIUM DIOXIDE (TIO2): ANALISA KARAKTERISTIK, SIFAT MEKANIK DAN KINERJA PENGOLAHAN AIR. Master thesis, Sriwijaya University.

GOFFARI, ANDI MOHAMMAD AZIZ and Mataram, Agung (2024) PEMBENTUKAN MEMBRAN POLYVINYLIDENE FLOURIDE DENGAN PENCAMPURAN PERAK NITRAT UNTUK PENYARINGAN AIR. Undergraduate thesis, Sriwijaya University.

HADI, JANU and Ali, Farida (2018) PRA RENCANA PABRIK PEMBUATAN NITROBENZENA KAPASITAS 93.000 TON/TAHUN. Undergraduate thesis, Sriwijaya University.

IRAWAN, AJIE RIZKY NABAWI and Pataras, Mirka and Dewi, Ratna (2018) PENGARUH PEMANFAATAN MATERIAL SISA PEMBAKARAN PRODUKSI PT. SEMEN BATURAJA RAWMEAL DAN KLINKER TERHADAP LAPIS TIPIS ASPAL BETON WEARING COURSE (HRS-WC) SEBAGAI FILLER. Undergraduate thesis, Sriwijaya University.

KHAIRUNNISA, SHARA and Pataras, Mirka and Kadarsa, Edi (2020) KAJIAN LABORATORIUM PENGGUNAAN STYRENE-BUTADIENE-STYRENE (SBS) DAN ETHYLENE VINYL ACETATE (EVA) TERHDAP LATASTON LAPIS AUS(HRS-WC). Undergraduate thesis, Sriwijaya University.

MAULANA, ISHAK and Mataram, Agung (2019) SIFAT MEKANIK MEMBRAN POLYACRYLONITRILE DENGAN PENAMBAHAN PERAK NITRAT TERHADAP STRUKTUR MIKRO DAN PERMEABILITAS. Undergraduate thesis, Sriwijaya University.

MUSHADDAQ, REYHAN FIKRI and Bama, Akhmad Aminuddin and Lestariningsih, Titik (2022) PEMBUATAN SOLID POLYMER ELEKTROLYTE DENGAN PENCAMPURAN DUA POLIMER (PVDF-HFP DAN PEO) SERTA MODIFIKASI FILLER. Undergraduate thesis, Sriwijaya University.

NADIYAH, NYAYU AYU and Mataram, Agung (2019) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYETHERSULFONE (PES) : KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

PRADITIA, AKBAR and Mataram, Agung (2019) MEMBRAN POLIVINIYLIDENE FLOURIDE DENGAN PENAMBAHAN PERAK 1%; ANALISA KEKUATAN MEKANIS DAN PERFORMA. Undergraduate thesis, Sriwijaya University.

PRASATYA, IQBAL NOVA and Mataram, Agung (2024) ANALISIS KARAKTERISTIK MEMBRAN PENGOLAHAN AIR DARI BAHAN POLYETHERSULFONE DENGAN PENAMBAHAN PERAK NITRAT. Undergraduate thesis, Sriwijaya University.

PRASETIA, KELVIN ANUGRAH and Mataram, Agung (2021) KARAKTERISTIK MEMBRAN POLYVINYLIDENE FLUORIDE (PVDF) DENGAN PENAMBAHAN TITANIUM DIOXIDE (TiO2) TERHADAP PENGUJIAN TARIK, STRUKTUR MIKRO DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

PUTRA, MUHAMMAD IQBAL APRIANSYAH and Mataram, Agung (2024) TEKNOLOGI MEMBRAN DENGAN CAMPURAN POLYETHERSULFONE (PES) DAN PERAK NITRAT (AgNO3) UNTUK PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

RAHMAYANI, JUMATUL and Royani, Idha and Jorena, Jorena (2020) PENGARUH WAKTU MILLING KAFEIN (C8H10N4O2) PADA PROSES POLIMERISASI DAN KARAKTERISTIK MOLECULARLY IMPRINTED POLYMER (MIP) NANO KAFEIN MENGGUNAKAN METODE COOLING-HEATING. Undergraduate thesis, Sriwijaya University.

RAMADHANIS, MARETA and Mataram, Agung and Yani, Irsyadi (2021) ANALISA KARAKTERISTIK MEMBRAN PENGOLAHAN AIR DARI BAHAN POLYETHERSULFONE (PES) DENGAN PENCAMPURAN TITANIUM DIOXIDE (TiO2). Master thesis, Sriwijaya University.

RAMADHINI, TRI KARIMAH and Agustina, Tuty Emilia and Melwita, Elda (2024) DEGRADASI FOTOKATALITIK LOGAM BERAT Cd, Cu, Fe DAN Pb MENGGUNAKAN NANOKOMPOSIT ZnO-ZEOLIT. Masters thesis, Sriwijaya University.

SELPIANI, ADE and SEPTIANI, ARISTA KHANZA and Moeksin, Rosdiana (2018) PRA RENCANA PABRIK PEMBUATAN MESYTILENE DENGAN KAPASITAS 222.OOO TON/TAHUN. Undergraduate thesis, Sriwijaya University.

SUKMA, IKBAR MAULANA and Mataram, Agung (2024) PEMBENTUKAN MEMBRAN PERAK NITRAT (AgNO3) DENGAN PENCAMPURAN POLYETHERSULFONE (PES); KARAKTERISTIK DAN SIFAT MEKANIS. Undergraduate thesis, Sriwijaya University.

YANTO, FEBRI and Royani, Idha and Suheryanto, Suheryanto (2019) PERANCANGAN ELEKTRODA CERDAS BERBASIS SENSOR POTENSIOMETRIK UNTUK MENDETEKSI MEMBRAN MOLECULARLY IMPRINTED POLYMER (MIP) KAFEIN. Undergraduate thesis, Sriwijaya University.

YONDHIKA, YONDHI PRATAMA and Pataras, Mirka and Kadarsa, Edi (2020) ANALISIS KARAKTERISTIK FLEXIBLE PAVEMENT CAMPURAN LASTON LAPIS AUS (AC-WC) DENGAN PENAMBAHAN POLIMER STYRENE-BUTADIENE-STYRENE (SBS) DAN ETHYLENE-VINYL-ACETATE (EVA). Undergraduate thesis, Sriwijaya University.

ZANADIYA, SANAS and Melwita, Elda (2020) PRA RANCANGAN PABRIK PEMBUATAN ASAM MONOKLOROASETAT KAPASITAS 25.000 TON/TAHUN. Undergraduate thesis, Sriwijaya University.