Items where Author is "Nukman, Nukman"

Article

Nukman, Nukman (2017) Cover, Toc dan artikel: Engine optimization grate multipurpose analysis method with quality function deployment. MATEC Web of Conferences, 101. pp. 264-269. ISSN 2261-236X

Nukman, Nukman (2015) The Potential of Biomass from Wood, Leaves, and Grass as Renewable Energy Sources in South Sumatera, Indonesia. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 37. pp. 2710-2715. ISSN 1556-7036

Nukman, Nukman and Harjono, Harjono (2014) Pengaruh Proses Perlakuan Panas Normalizing dan Quenching dengan Media Air dan Minyak Silikon terhadap Sifat Mekanik dan Struktur Mikro pada Baja Karbon Medium. Majalah Ilmiah Sriwijajaya, XXV (18). pp. 44-54. ISSN 01264680

Nukman, Nukman and Aziz, Umar Abdul and Akhmad, Al Antoni (2014) Analisa Kekasaran Permukaan Alumnium dan Baja Karbon Rendah yang Dibubut dengan Pahat HSS dan Pahat dari Pegas Daun Mobil HINO FM260. Jurnal Rekayasa Mesin, 13 (4). pp. 1-9. ISSN 2338-7009

Nukman, Nukman and Sipahutar, Riman and Yani, Irsyadi and Arief, A.Taufik (2014) THE BLENDING EFFECT OF COALITE, COCONUT SHELL CHARCOAL AND GELAM WOOD CHARCOAL ON CALORIFIC VALUE. American Journal of Applied Science, 11 (5). pp. 833-836.

HY, Fusito and Nukman, Nukman and Hadi, Qomarul (2013) New Performance with Matrix Composites of Used Plastic, Fiber of Red Pinang Sheath and Bamboo. Journal of Mechanical Science and Engineering, 1 (1). pp. 27-32.

Pinem, Ramban JP and Barlin, Barlin and Nukman, Nukman (2013) PENGARUH CAMPURAN ETANOL PADA BAHAN BAKAR MINYAK PREMIUM TERHADAP NILAI KALOR DAN ANGKA OKTAN. Majalah Ilmiah Sriwijaya, XXIV (17). pp. 15-24. ISSN 0126-4680

Pinem, Ramban JP and Barlin, Barlin and Nukman, Nukman (2013) Pengaruh Campuran etanol pada Bahan Bakar Minyak Premium terhadap Nilai Kalor dan Angka Oktan. Majalah Ilmiah Sriwijaya, XXIV (17). pp. 15-24.

Yahya, Yahya and Nukman, Nukman and Chandra, Hendri (2013) The Carburizing Process of Low Carbon Steel with Charcoal Media. Journal of Mechanical Science and Engineering,, 1 (1). pp. 1-6. ISSN 2354-9467

Taufikurrahman, Taufikurrahman and Nukman, Nukman and Yanis, Muhammad (2013) Effect of The Pressure of the Squeeze Process on the Hardness and Micro Structure of Recycled Aluminum Materials. Journal of Mechanical Science and Engineering, 1 (1). pp. 7-12.

Nukman, Nukman and Kamaludin, Alhafis (2011) Pengukuran Temperatur Bahan Bakar Arang Kayu, Arang Batok Kelapa dan Batubara pada Tuyer dengan Suplai Udara dari Blower. Majalah Ilmiah Sriwijaya, 18 (11). pp. 647-657.

Nukman, Nukman and Prasetyo, Sugeng (2011) Pengaruh Karburisasi dengan Serbuk Batubara Semi Antrasit pada Baja Karbon Medium yang Diquenching dengan Pelumas SAE 140, Minyak Sawit Mentah dan Air Terhadap Kekerasan dan Ketangguhan. Jurnal Rekayasa Sriwijaya, 10 (2). pp. 43-48.

Nukman, Nukman (2009) Emisi Gas Buang Pembakaran Serpihan Biomassa Ilalang dan Daun Pisang dengan Sistem Pressurized Fluidized Bed Combustion. Jurnal Rekayasa Sriwijaya., 18 (2). pp. 22-26.

Nukman, Nukman (2009) Pencucian Batubara asal Tanjung Enim di Dermaga Kertapati dengan Menggunakan Air Bergelembung Udara: Suatu Usaha Peningkatan Mutu Batubara. Jurnal Rekayasa Sriwijaya, 18 (2). pp. 31-37.

Nukman, Nukman (2008) Dekomposisi Volatile Matter dari Batubara Tanjung Enim dengan Menggunakan Alat Thermogravity Analyzer (TGA). Jurnal MAKARA seri Teknologi, 12 (2). pp. 65-69.

Nukman, Nukman and Wijaya, Rheino (2008) Analisa Pengaruh Perlakuan Panas Austemper pada Besi Cor Nodular Non Paduan terhadap Perubahan Struktur Mikro dan Perubahan Sifat Mekanis. Jurnal Rekayasa Sriwijaya, 16 (2). pp. 49-58.

Suhatmoko, Galih and Nukman, Nukman (2008) Analisa Perlakuan Panas Austempering pada Besi Tuang Nodular FCD 45 terhadap Kekuatan Impak dan Kekerasannya. Jurnal Rekayasa Sriwijaya, 16 (2). pp. 29-37.

Nukman, Nukman (2008) Pengaruh Pencampuran Batubara Semi Antrasit dan Bituminus terhadap Karakteristik Pembakarannya dengan Oksigen Murni. Jurnal Rekayasa Mesin, 8 (2). pp. 77-83.

Nukman, Nukman (2007) Pengaruh Preheating Austenisasi dan Austemper pada Temperatur dan Waktu Tahan Tertentu pada Besi Tuang Nodular FCD 45 terhadap Sifat Mekanisnya. Jurnal Rekayasa Mesin, 7 (2). pp. 33-38.

Nukman, Nukman and Basri, Hasan (2007) CLEAN COAL TECHNOLOGY: Pengurangan Kadar Abu dan Sulfur dari Batubara dengan Metoda Aglomerasi Air?Minyak Sawit. Proceeding First Annual INTERANTIONAL SEMINAR 2007 on GREEN TECHNOLOGY AND ENGINEERING, 1. pp. 130-139. ISSN 1978-5933

Nukman, Nukman and Poertadji, Suhardjo (2007) Peningkatan nilai kalori batubara semi antrasit dengan aglomerasi air-minyak sawit. Jurnal Ilmiah Teknik Mesin, POROS, 10 (3). pp. 178-186.

Nukman, Nukman and Poertadji, Suhardjo (2006) Metode Aglomerasi Air-Minyak Sawit untuk menurunkan kadar Sulfur pada batubara Bituminus. Jurnal Teknologi, 20 (4). pp. 279-286.

Poertadji, Suhardjo and Nukman, Nukman and Hikam, Muhammad (2006) Pengaruh Aglomerasi Air-Minyak Sawit terhadap Karbon dan Nilai Kalori batubara Semi-Antrasit, Bituminus dan Sub-Bituminus. Jurnal Sains Materi Indonesia, 7 (3). pp. 68-74.

Nukman, Nukman and Poertadji, Suhardjo (2006) Pengurangan Kadar Abu dan Sulfur pada Batubara Sub Bituminus dengan Metode Aglomerasi Air-Minyak Sawit. Jurnal Sains Materi Indonesia, 7 (3). pp. 31-36.

Nukman, Nukman and Poertadji, Suhardjo (2006) Peningkatan Nilai Kalori Batubara Bituminus dengan Aglomerasi Air-Minyak Sawit. Jurnal Teknologi, XX (2). pp. 106-113.

Nukman, Nukman (2005) Briket Batubara: Amankah Dipakai? Majalah TAMBANG. pp. 30-31.

Nukman, Nukman (2003) Analisa Mineral Batubara Tanjung Enim dengan Perangkat X-Ray Fluorecency (XRF), X-Ray Diffraction (XRD), PCPDFWin (Plus Pearson?sHandbook) dan General Structure Analysis System (GSAS). Jurnal Rekayasa Mesin, 3 (1). pp. 8-12.

B., Kurniawan and Supiyanto, Supiyanto and I., Sugihartono and Sunarno, Sunarno and J., Jamaludin and L., Hermanto and S., Soejati and S., Soeyati and Nukman, Nukman and S, Poertadji (2003) Magnetic Properties Study of Coal Oxidation Process. Materials Science Forum (Advanced Materials Processing II), 437-43. pp. 493-498.

Nukman, Nukman and Arifin, Bustanul and Sugiarto, Bambang (2002) Pengaruh Penambahan Unsur 0,25 % Mo pada Besi Tuang Nodular yang Di Austenisasi dan Di Austemper menjadi Austempered Ductile Iron (ADI) terhadap Sifat Mekaniknya. Jurnal MAKARA seri Teknologi, 6 (1). pp. 31-36.

Nukman, Nukman (2002) Pengaruh Kandungan Paduan 0,25 % Mo dan 1,0 % Ni pada Sifat Mekanis dari Material Austempered Ductile Iron (ADI). Jurnal Rekayasa Mesin, 2 (1). pp. 1-5. ISSN 2338-7009

Book Section

Bahrin, David and Nukman, Nukman and Dariansyah, Yuri (2011) BIOMASSA: BAHAN BAKAR BERSIH UNTUK INDUSTRI KARET DI SUMATERA SELATAN. In: Prosiding Seminar Nasional AVoER ke-3. Fakultas Teknik Universitas Sriwijaya, Palembang, pp. 110-115.

Nukman, Nukman and Sipahutar, Riman and Arief, Taufik (2010) Produk Berkadar Abu dan Sulfur Rendah serta Bernilai Kalori Tinggi dari Proses Aglomerasi Air-Minyak Sawit sebagai Bahan Baku Briket Batubara. In: PROSIDING SEMINAR NASIONAL TAHUNAN TEKNIK MESIN IX. Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya, PALEMBANG, MI-249. ISBN 78-602-97742-0-7

Nukman, Nukman and Arief, Taufik and Sipahutar, Riman (2006) Carbonization and Oil Agglomeration Method as Pretreatment for Coal Briquette. In: Prosiding HEDS SEMINAR ON SCIENCE & TECHNOLOGY HEDS-SST 2004 BIDANG TEKNIK. FORUM HEDS Badan Kerjasama Perguruan Tinggi Negeri Wilayah Barat Direktorat Jenderal Pendidikan Tinggi, Pekanbaru, pp. 601-610.

Monograph

Bizzy, Irwin and Sipahutar, Riman and Nukman, Nukman and Kadir, Zahri and Barlin, Barlin (2012) Kaji Eksperimental Alat Pengering Pucuk Daun Gaharu Tenaga Surya Tipe Rak Dengan Menggunakan Pelat Berlubang Tanpa Penutup Transparan. Project Report. Fakultas Teknik Universitas Sriwijaya.

Sipahutar, Riman and Kaprawi, Kaprawi and Alian, Helmy and Santoso, Dyos and Kadir, Muhammad Zahri and Marwani, Marwani and Hadi, Qomarul and Nukman, Nukman and Mohruni, Amrifan Saladin (2011) PENYULUHAN PENGGUNAAN MESIN RECOVERY, RECYCLE DAN RECHARGING (MESIN 3R) UNTUK MENCEGAH PERUSAKAN LAPISAN OZON DI INDERALAYA KABUPATEN OGAN ILIR. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Nukman, Nukman and Sipahutar, Riman and Budi, Teguh and Bizzy, Irwin and Ellyanie, Ellyanie and Barlin, Barlin and Suyatno, Suyatno (2011) Kaji Potensi Biomassa dari Kayu dan Daun-Rumputan (Woods and Herbaneous) Asal Sumatera Selatan sebagai Sumber Energi Terbarukan. Technical Report. Jurusan Teknik Mesin Fakultas Teknik Unsri.

Conference or Workshop Item

Nukman, Nukman and Surya, Indra and Liantara, Rizki and Yani, Irsyadi and Arifin, Amir (2022) TGA / DTA Analysis for AA6061 with Fine Coal Blend. In: Sriwijaya International Conference on Engineering and Technology 2021 (SICETO 2021), 25-26 October 2021, Palembang. (In Press)

Nukman, Nukman (2012) Rancang Bangun Swirling Pressurized Fluidized Bed Combustor (SPFBC) Sebagai alat Gasifikasi Bahan Biomassa. In: Seminar Nasional AVoER IV Tahun 2012, Universitas Sriwijaya Fakultas Teknik, 28-29 Nopember 2012, Palembang, Indonesia.

Nukman, Nukman (2010) Produk berkadar abu dan sulfur rendah serta bernilai kalori tinggi dari proses aglomerasi air-minyak sawit sebagai bahan baku briket batubara. In: Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM) IX,, 13-15 October 2010, Palembang, Indonesia.

Nukman, Nukman (2010) Uji emisi pembakaran batubara hasil proses aglomerasi air-minyak sawit. In: Prosiding Seminar Nasional Riset dan Teknologi Terapan (RITEKTRA) 2010 Universitas Katolik Atmajaya, 16 June 2010, Jakarta, Indonesia.

Nukman, Nukman (2009) Bahanbaku Briket Indonesia dan Besaran Energi Aktivasi diukur dengan Termogravimetry Analyzer. In: Prosiding Seminar Nasional; Pengelolaan Lingkungan Pasca Tambang Tahun 2009, 21-22 October 2009, Palembang, Indonesia.

Nukman, Nukman (2009) Energi Aktivasi dari Dekomposisi Batubara yang dicuci dengan Metode Aglomerasi Minyak Sawit. In: Prosiding Digital: Seminar Nasional Mesin dan Industri (SNMI) 5 - 2009, 8 October 2009, Jakarta, Indonesia.

Nukman, Nukman (2009) Pengaruh Pengurangan Jadar Abu terhadap Kenaikan Nilai Kalori Batubara Tanjung Enim: Perbandingan Metoda Pencucian Batubara Aglomerasi Air-Minyak Sawit dan Air Bergelembung. In: Prosiding Digital: Seminar Nasional Mesin dan Industri (SNMI) 5 - 2009, 8 October 2009, Jakarta, Indonesia.

Nukman, Nukman and Basri, Hasan (2007) Pengurangan Kadar Abu dan Sulfur pada Batubara Semi Antrasit dari Tanjung Enim dengan cara Pencucian bermedia Air-Minyak Sawit. In: Penelitian Lingkungan di Perguruan Tinggi,, 20 June 2007, Jakarta, Indonesia.

Book

Nukman, Nukman and Yani, Irsyadi and Arifin, Amir and MS, Firdaus (2020) BUKU AJAR: PELUMAS BEKAS SEBAGAI BAHAN BAKAR UNTUK PELEBURAN ALUMINIUM BEKAS: DITINJAU DARI CARA PELEBURAN SECARA LANGSUNG DAN TIDAK LANGSUNG SERTA PENGUJIAN KOMPOSISI KIMIA, SIFAT MEKANIK, SIFAT LELAH SERTA OKSIDASI MATERIAL. UNSRI PRESS, Palembang. ISBN 9789795878520

Thesis

HELMY, HELMY and Nukman, Nukman and Badaruddin, Mohammad (2024) REKAYASA MIKROSTRUKTUR BAJA 42CrMo4 MELALUI AUSTEMPER DUA TAHAP UNTUK MENINGKATKAN SIFAT MEKANIK DAN FATIK. Undergraduate thesis, Sriwijaya University.

CAHYADI, AKBAR MAULANA and Nukman, Nukman (2024) PENGARUH VARIASI SUHU PERLAKUAN PANAS TERHADAP UJI FATIK BENDING UNTUK PADUAN ALUMINIUM 6061. Undergraduate thesis, Sriwijaya University.

KURNIAWAN, MUHAMMAD DIKI and Nukman, Nukman (2024) PENGARUH PERLAKUAN PANAS T6 PADA ALUMINIUM PADUAN AA6061 TERHADAP KEKUATAN FATIGUE BENDING. Undergraduate thesis, Sriwijaya University.

RIYADI, ASEF and Nukman, Nukman and Mataram, Agung (2024) UJI FATIGUE TORSI PADA MATERIAL AA7075 YANG MENDAPATKAN PERLAKUAN PANAS T6. Masters thesis, Sriwijaya University.

WIJAYA, ADRYAN and Nukman, Nukman (2023) UJI BENDING PATAH LELAH PADA AA7075 YANG MENDAPATKAN PERLAKUAN PANAS T6. Masters thesis, Universitas Sriwijaya.

APRIZA, MUHAMMAD YUSUF and Nukman, Nukman (2023) PENGARUH PERLAKUAN PANAS T6 TERHADAP KEKUATAN FATIK PADA ALUMINIUM PADUAN. Undergraduate thesis, Sriwijaya University.

CAHYA, ICHSAN DWI and Nukman, Nukman (2022) ANALISA ENERGI AKTIVASI DAN TEMPERATUR SOLIDUS PADA PENGECORAN ALUMINIUM YANG DITAMBAH SERBUK ARANG BATOK KELAPA. Undergraduate thesis, UNIVERSITAS SRIWIJAYA.

SATRIO, ROBY ADI and Nukman, Nukman (2022) ANALISA ENERGI AKTIVASI DAN TEMPERATUR SOLIDUS PADA PENGECORAN ALUMINIUM YANG DITAMBAH SERBUK ARANG KAYU. Undergraduate thesis, Sriwijaya University.

ALDIKA, ALDIKA and Nukman, Nukman (2022) PENGARUH PENAMBAHAN TIMAH PUTIH MURNI PADA CORAN ALUMINIUM MURNI TERHADAP ENERGI AKTIVASI DAN OKSIDASI. Undergraduate thesis, Sriwijaya University.

DARMAWAN, RACHMAT ARTICO and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM AA 6061 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

SUITO, PANGKI and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM PADUAN 7075 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

KIRAM, ARIF FAUZUL and Nukman, Nukman (2021) PENGARUH PENAMBAHAN TIMAH HITAM MURNI TERHADAP ENERGI AKTIVASI DAN OKSIDASI PADA CORAN ALUMINIUM MURNI. Undergraduate thesis, Sriwijaya University.

AGRISA, HERIK HENCI and Nukman, Nukman and Mataram, Agung (2021) PENGARUH PENAMBAHAN SERBUK ARANG KAYU DAN ARANG TEMPURUNG KELAPA PADA RECYCLE ALUMINIUM ALLOY 6061 TERHADAP KEKERASAN DAN KEAUSAN. Master thesis, universitas sriwijaya.

PANGESTU, ALDO and Nukman, Nukman (2021) PENGARUH VARIASI BERAT PENAMBAHAN BATUBARA 60 MESH PADA ALUMINIUM COR TERHADAP KEKUATAN LELAH. Undergraduate thesis, Sriwijaya University.

LIANTARA, MUHAMMAD RIZKI and Nukman, Nukman (2020) PENGARUH CAMPURAN VARIASI BATUBARA HALUS DALAM CORAN LOGAM ALUMINIUM CAIR TERHADAP KEKUATAN TARIK, KEKERASAN DAN BEBAN IMPAK. Undergraduate thesis, Sriwijaya University.

ARHANSYAH, FEBBY and Nukman, Nukman (2020) PENGARUH HOLDING TIME ARTIFICIAL AGING TERHADAP KINETIKA REAKSI OKSIDASI ALUMINIUM 6061 PADA TEMPERATUR TINGGI. Undergraduate thesis, Sriwijaya University.

RACHMAN, M SABILLI and Nukman, Nukman (2019) ANALISIS SIFAT MEKANIK HASIL PENGECORAN ALUMINIUM SKRAP YANG MENDAPAT PERLAKUAN PANAS. Undergraduate thesis, Sriwijaya University.

ISMAIL, RENDI and Nukman, Nukman (2019) PENGARUH PERLAKUAN PANAS PADA HASIL PENGECORAN ALUMINIUM PADUAN DENGAN MENGGUNAKAN CETAKAN ALUMINIUM TERHADAP SIFAT MEKANIK. Undergraduate thesis, Sriwijaya University.

Amrunika, KGS. IBRAHIM AKBAR and Nukman, Nukman (2019) ANALISIS UJI KEKERASAN, IMPAK, DAN TARIK DARI ALUMINIUM HASIL PELEBURAN KALENG MINUMAN YANG DIPADU DENGAN TIMAH PUTIH SEBESAR 3%, 6%, DAN 9%. Undergraduate thesis, Sriwijaya University.

BAROKAH, ARAFAT GILANG and Nukman, Nukman (2019) ANALISIS UJI KEKERASAN, TARIK DAN IMPAK DARI ALUMINIUM HASIL PELEBURAN KALENG MINUMAN YANG DIPADU DENGAN OLI. Undergraduate thesis, Sriwijaya Univesity.

KAHAR, ANDRE TAUFIK and Nukman, Nukman (2019) ANALISIS UJI TARIK, KEKERASAN, DAN IMPAK DARI ALUMINIUM HASIL PELEBURAN KALENG MINUMAN YANG DIPADU DENGAN TIMAH HITAM 3%, 6%, 9%. Undergraduate thesis, Sriwijaya University.

DAHLAN, MUHAMMAD and Nukman, Nukman (2018) ANALISA PERBANDINGAN ENERGI AKTIVASI DAN OKSIDASI HASIL PENGECORAN ALUMINIUM KALENG BEKAS SEBELUM DAN SESUDAH DI HEAT TREATMENT DENGAN ALAT PENGUJIAN THERMOGRAVIMETRY ANALYZER (TGA). Undergraduate thesis, Sriwijaya University.

ISWARA, DENI and Nukman, Nukman (2018) PENGARUH MEDIA QUENCHING AIR DAN ANNEALING DARI HASIL PELEBURAN ALUMINIUM KALENG BEKAS MINUMAN TERHADAP KEKERASAN DAN KEAUSAN. Undergraduate thesis, Sriwijaya University.

SOFWAN, SOFWAN and Nukman, Nukman (2018) PENGARUH PERLAKUAN PANAS TERHADAP SIFAT MEKANIK PADA HASIL PELEBURAN KALENG MINUMAN BEKAS. Undergraduate thesis, Sriwijaya University.

SUKADI, SUKADI and Pratiwi, Diah Kusuma and Nukman, Nukman (2017) ANALISIS KERUSAKAN PIPA SUPERHEATER PADA BOILER MODEL TAKUMA N600 SA TERHADAP FOULING INDEX. Master thesis, Sriwijaya University.

PANGHURIAN, MUHAMMAD NUR and Nukman, Nukman (2016) UJI SIFAT MEKANIK HASIL PELEBURAN ALUMINIUM KALENG MINUMAN BEKAS DENGAN BAHAN BAKAR MINYAK PELUMAS BEKAS YANG DIPANASKAN SECARA TIDAK LANGSUNG DAN DIBERI PERLAKUKAN PANAS DENGAN DAPUR LISTRIK DAN TUNGKU KRUSIBEL. Undergraduate thesis, Sriwijaya University.

GANI, VIQAR ADLY and Nukman, Nukman (2016) UJI SIFAT MEKANIK DARI SAMPEL ALUMINIUM KALENG MINUMAN YANG DILEBUR DENGAN MENGGUNAKAN BAHAN BAKAR PELUMAS BEKAS DENGAN PEMBAKARAN SECARA LANGSUNG DAN MENDAPAT PERLAKUAN PANAS. Undergraduate thesis, Sriwijaya University.

PROBONARDO LUBIS, EDWARD and Nukman, Nukman and Ibrahim, Zulkarnain (2016) PENGARUH VARIASI ARUS PENGELASAN SMAW TERHADAP PERUBAHAN SIFAT STRUKTUR MIKRO DAN KEKERASAN BAJA. Undergraduate thesis, University of Sriwijaya.

SAPUTRA, FANHAR and Nukman, Nukman (2016) ANALISIS PENGARUH QUENCHING DAN TEMPERING BESERTA VARIASI WAKTU TAHAN DENGAN MEDIA PENDINGIN OLI MESRAN SAE 40 TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIK BAJA KARBON SEDANG. Undergraduate thesis, Sriwijaya University.

SAPUTRA, FANHAR and Nukman, Nukman and Pratiwi, Diah Kusuma (2016) ANALISIS PENGARUH QUENCHING DAN TEMPERING BESERTA VARIASI WAKTU TAHAN DENGAN MEDIA PENDINGIN OLI MESRAN SAE 40 TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIK BAJA KARBON SEDANG. Undergraduate thesis, University of Sriwijaya.

OKTARIANSYAH, MUHAMMAD and Hadi, Qomarul and Nukman, Nukman (2014) “ANALISIS PENGARUH UKURAN PARTIKEL FLY ASH BATU BARA TERHADAP SIFAT MEKANIK KOMPOSIT POLIPROPILENA (PP). Undergraduate thesis, University of Sriwijaya.

AGUSTIAN, AGUSTIAN and Nukman, Nukman (2014) PENGARUH SIFAT MEKANIK DAN STRUKTUR MIKRO PADA LOGAM YANG MENGALAMI NORMALIZING SERTA QUNCHING MEDIA OLI BEKAS. Undergraduate thesis, Sriwijaya University.

PRASETYO, SUGENG and Nukman, Nukman (2014) PENGARUH PROSES QUENCH DENGAN PERBEDAAN SUHU DAN MEDIA PENDINGIN PADA BAJA AISI 1045 DAN AISI 4140 DENGAN VARIASI HOLDINGTIME TERHADAP KEKERASAN DAN KEAUSAN. Master thesis, Sriwijaya University.

PRADIPTA, DWIJA ARDYA and Nukman, Nukman (2008) PENGARUH PEMANASAN AUSTEMPER DENGAN TEMPERATUR AUSTENISASI 950° C TERHADAP SIFAT KEKERASAN DAN KEKUATAN TARIK BESI TUANG NODULAR FCD 30. Undergraduate thesis, Sriwijaya University.

Teaching Resource

Nukman, Nukman (2027) BAHAN PERKULIAHAN PERLAKUAN PERMUKAAN Genap 2023 2024. [Teaching Resource] (Unpublished)

Nukman, Nukman (2023) Materi Kuliah Perlakuan Panas kls Indralaya dan Palembang GANJIL 2023. [Teaching Resource] (Unpublished)

Nukman, Nukman and Darmawi, Darmawi (2023) Materi Perkuliahan Alat Pengangkat dan Pengangkut. [Teaching Resource] (Unpublished)

Nukman, Nukman and Arifin, Amir (2020) Pedoman Praktikum Material UNSRI. [Teaching Resource] (In Press)

Other

Nukman, Nukman (2023) SURAT KEPUTUSAAN REKTOR UNSRI NO 0564/UN9/SK.BUK.KP/2023 Tentang Pengangkatan Koordinator Prodi S3 Ilmu Teknik. Universitas Sriwijaya. (Unpublished)

Nukman, Nukman (2023) Surat Ketentuan Dekan FT No.0001/UN9.FT/TU.SK/2023 Tentang Pembimbing Skripsi an. Muhammad Yusup Apriza 2023. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Nukman, Nukman and Mataram, Agung (2023) DAFTAR HADIR DAN DPNA KULIAH TOPIK KHUSUS ADVANCED MATERIALS GANJIL 2023 2024. FT UNSRI S3. (Unpublished)

Nukman, Nukman and Mataram, Agung (2023) DAFTAR HADIR DAN DPNA MATERIAL KOMPOSIT GANJIL 2023 2024. Jurusan Teknik Mesin Unsri. (Unpublished)

Nukman, Nukman and Darmawi, Darmawi (2023) Daftar Hadir dan DPNA Alat Pengangka-ut Kelas Indralaya dan Palembang 2023-2024. Jurusan Teknik Mesin Unsri. (Unpublished)

Nukman, Nukman (2023) Daftar Hadir dan DPNA Perlakuan Panas kls Indralaya dan Palembang 2023-2024. Jurusan Teknik Mesin Unsri. (Unpublished)

Nukman, Nukman and Saggaff, Anis and Nawawi, Zainudin and Basri, Hasan and Kaprawi, Kaprawi and Said, Muhammad and Mohruni, Amrifan Saladin and Stiawan, Deris and Sipahutar, Riman and Buchari, Erika and Ibrahim, Eddy and Nurmaini, Siti and Agustina, Tuty Emilia and Suprapto, Bhakti Yudho and fransiska, widya and Yani, Irsyadi and Mataram, Agung and Arifin, Amir and Yanis, Muhammad and Sidik, Muhammad Abu Bakar and Saloma, Saloma and ermatita, ermatita and Arita, Susila and Bahrin, David and Resti, Yulia and Jambak, Muhammad Irfan and abdiansyah, abdiansyah and Rini, Dian Palupi and kunang, Yesi Novaria and Tutuko, Bambang and firdaus, firdaus and Hartono, Yusuf and Yusuf, Maulana and Taqwa, Ridhah and Kadarsa, Edi and Agustien, Melawaty and Siswanto, Ari and Mohadi, Risfidian and Melwita, Elda and Nurjannah, Siti Aisyah and Aminuddin, K. M. and Pratiwi, Diah Kusuma and Pahendra, Iwan and Dwijayanti, Suci and Erwin, Erwin and Sukemi, Sukemi and Hariani, Poedji Loekitowati and ferdiansyah, ferdiansyah and Rahayu, Wiwik and Moerwanto, A. S. and antoni, darius and Komariah, Leily Nurul and Samsuryadi, Samsuryadi and Barlin, Barlin and muhamad, muhamad and Partan, Radiyati Umi and Sutriyono, Edy and Setiawan, Budhi and Hadinata, Febrian and Bustan, M. Djoni and Haryati, Sri and widhiarso, Wijang and safaatunnur, unnur and Dewi, Tresna and Handayani, Sri and Rosidawani, Rosidawani and Husni, Nyayu Latifah and Anugrah Putranto, Dinar Dwi and Setiawan, Herri and Nasir, Subriyer and Budianta, Dedik and ridwan, muhammad and Sofijan, Armin and Lim, Taih Cheng and Chandra, Hendri and Syahrom, Ardiyansyah and Badaruddin, Muhammad and Sharif, Safian and Roni, Kiagus Ahmad and putra, Syaofiansyah Jaya and Suryadi, Fransiscus Xaverius and krispantono, - and oktarina, Maya Ftri (2023) KEPUTUSAN DEKAN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA Nomor: 1136/UN9.FT/TU.SK/2023 Tentang BEBAN KERJA DOSEN PADA PROGRAM STUDI PROGRAM DOKTOR FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GANJIL TAHUN AKADEMIK 2023/2024. FT UNSRI S3. (Unpublished)

Nukman, Nukman (2023) KORESPONDENSI_The Effect Of Fine Coal Intube Moldswhen Pouring Aluminum Alloy 6061 On Wear Rate And Hardness Value. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Korespondensi dari_The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Asian Research Publishing Network (ARPN). (Submitted)

Nukman, Nukman (2023) Korespondensi_Experimental study of convective heat transfer of alumina oxide nanofluids in triangle channel with uniform heat flux. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Materi Kuliah Topik Khusus Adanced Materials ganjil 2023 2024. FT UNSRI S3. (Unpublished)

Nukman, Nukman and Zulkarnain, Zulkarnain and Saputra, Ade and Kaprawi, Kaprawi and Pratiwi, Diah Kusuma and Yanis, Muhammad and Puspitasari, Dewi and Thamrin, Ismail and Hadi, Qomarul and Alian, Helmy and Santoso, Dyos and Gustini, Gustini and SUNDARI, ELLA and yudo, eko and YULIANTO, YULIANTO and bahiuddin, irfan and Firdaus, Aneka and Utami, Nurhabibah Paramitha Eka and Marwani, Marwani and Astuti, Astuti and Ellyanie, Ellyanie and PRAKOSO, AKBAR TEGUH and Suprapto, Bhakti Yudho and Mohruni, Amrifan Saladin and Yani, Irsyadi and Arifin, Amir and Bizzy, Irwin and intang, ambo and Akhyar, Gusri and Irmawan, Irmawan and Hadinata, Febrian and Mardhi, Alim and Gunawan, Gunawan and Adanta, Dendy and Arifin, Fatahul and Homzah, Ozkar Firdausi (2023) SK Pengelola Jurnal Rekayasa Mesin UNSRI 2023. Jurusan Teknik Mesin Unsri.

Nukman, Nukman (2023) Similarity of_ Effect of Aging to the Hardness of Aluminum Beverage Cans with Addition of Used Lubricant. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Analysis of Fatigue Life and Crack Propagation Characterization of Gray Cast Iron under Normalizing Process. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Besaran Energi Aktivasi Dari Oksidasi Hasil Pengecoran Aluminium Kaleng Minimum Yang Mendapat Perlakuan. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Decomposition Of Polyvinyl Chloride, Polypropylene And Melamine Using Thermogravimetric Analyzer. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Engine optimization grate multipurpose analysis method with quality function deployment. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Experimental study of convective heat transfer of alumina oxide nanofluids in triangle channel with uniform heat flux. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Ithenticate: Oxidation of beverage cans in the temperature range 400-610 °C. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_KAJIAN SIFAT MEKANIK CORAN ALUMINIUM DAUR ULANG HASIL PELEBURAN DAPUR PEMBAKARAN LANGSUNG INDUSTRI RUMAHAN. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Mechanical properties of castings aluminium waste which is smelted in simple furnace with a variety of fuels. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_Self-Ignition Temperature of Peat. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_The Effect of Heat Treatment on Fatigue Testing of Aluminum Cans. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_The Effect of Sinking Parameters To Optimize Response at Edm of Aisi H13 Using Taguchi Fuzzy Method. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_The Potential of Biomass from Wood, Leaves, and Grass as Renewable Energy Sources in South Sumatera, Indonesia. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Similarity result of_USED LUBRICATING OIL AS A FUEL FOR SMELTING WASTE ALUMINUM. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman (2023) Surat Keputusan Rektor Unsri No.0958/UN9.FT/SK.TU/2023 tentang Panitian kegiatan Seminar Disertasi an Indra Surya. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Nukman, Nukman (2022) SK Mengajar BKD Material Komposit semester ganjil 2022-2023. Engineering Faculty.

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwiajaya. (Submitted)

Nukman, Nukman (2022) Similarity result of_Energy Activation Of Decomposition Of Castings Of Pure Aluminum-Stannum Alloy. Asosiasi Peneliti Sriwijaya. (Submitted)

Nukman, Nukman (2021) Similarity result of_Peningkatan ketangguhan dan ketahanan fatik siklus rendah pada baja ASSAB 709 M melalui proses annealing) Peningkatan_ketangguhan_dan_ketahanan_fatik_siklus. Jurusan Teknik Kimia Fakultas Teknik UNSRI. (Submitted)

Nukman, Nukman (2021) Similarity result of_The Effect of Adding Wood Charcoal Powder and Coconut Shell Charcoal on Recycle Aluminum Alloy 6061 on Hardness. iosrjournals.org. (Submitted)

Nukman, Nukman (2020) Sertifikat Presenter Konferensi internasional (symposium) SENTEN 2018. Engineering Faculty. (Unpublished)

Chandra, Hendri and Nukman, Nukman and Sianturi, Baodadi (2019) Similarity of Analysis of Fatigue Life and Crack Propagation characterization of Gray Cast Iron Under Normalizing Process. Ithenticate Universitas sriwijaya, UNSRI. (Submitted)

Nukman, Nukman (2019) Similarity result of_THE EFFECT OF FINE COAL INTUBE MOLDSWHEN POURING ALUMINUM ALLOY 6061 ON WEAR RATE AND HARDNESS VALUE. GEOMATE International Society. (Submitted)

Nukman, Nukman (2018) Korespondensi SENTEN 2018 Self-Ignition Temperature of Peat dan The effect of heat treatment on fatigue testing of aluminum cans. IOP Publisher. (Submitted)

Yahya, Yahya and Nukman, Nukman and Chandra, Hendri (2013) Similarity of The Carburizing Process of Low Carbon Steel with Charcoal Media. Ithenticate Universitas sriwijaya. (Submitted)

Nukman, Nukman and Yani, Irsyadi and MS, Firdaus Plagiarism and Similarity Checker of Engine optimization grate multipurpose analysis method with quality function deployment. Turnitin Universitas Sriwiajaya.

Nukman, Nukman and Yani, Irsyadi and Arifin, Amir and MS, Firdaus Plagiarism and Similarity Checker of OXIDATION OF BEVERAGE CANS IN THE TEMPERATURE RANGE 400-610 OC. Turnitin Universitas Sriwiajaya.