Items where Author is "Utami, Nurhabibah Paramitha Eka"

A. SAMI, A. SAMI and Utami, Nurhabibah Paramitha Eka (2024) VARIASI ARUS TERHADAP SIFAT FISIK DAN MEKANIK DISSIMILAR METAL WELDING ASTM A36 DAN SS 316 MENGGUNAKAN ELEKTRODA E316-16. Undergraduate thesis, Sriwijaya University.

PRASTYANTO, WISNU HAFIZ and Utami, Nurhabibah Paramitha Eka (2024) PENGARUH VARIASI KUAT ARUS DISSIMILAR METAL WELDING ASTM A36 DAN SS 316 MENGGUNAKAN ELEKTRODA E6010. Undergraduate thesis, Sriwijaya University.

PUTRA, MUHAMMAD DEAN ANWARSYAH and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) CORROSION UNDER INSULATION MEDIA AIR LAUT DAN AIR RAWA PADA PENGELASAN BAJA A36 YANG DI-PREHEAT. Undergraduate thesis, Sriwijaya University.

ALFARABY, MUHAMMAD DILFU and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) CORROSION UNDER INSULATION MEDIA AIR LAUT DAN AIR RAWA PADA PENGELASAN BAJA A36 YANG DINORMALISASI. Undergraduate thesis, Sriwijaya University.

Utami, Nurhabibah Paramitha Eka and Chandra, Hendri and Firdaus, Aneka (2023) Similarity of Rancang Bangun Kompor Rumah Tangga Dengan Bahan Bakar Sisa Limbah Kayu Sebagai Alternatif LPG Bagi Masyarakat Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

PERMADI, FAJAR GALIH and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) PENGARUH PENGELASAN TERHADAP KOROSI DI BAWAH ISOLASI DENGAN MEDIA AIR LAUT DAN AIR RAWA PADA BAJA ASTM A36. Undergraduate thesis, Sriwijaya University.

ZAID, MUHAMMAD and Utami, Nurhabibah Paramitha Eka (2023) PENGELASAN DISSIMILAR LAP JOINT MENGGUNAKAN SMAW: ASTM A36 DAN SS 304 DENGAN ELEKTRODA E6010 DAN E308-16. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) Similarity of Teknologi Pengelasan Bagi Pengusaha Dan Pekerjaan Di Bidang Las Di Kecamatan Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) Absensi Matakuliah Teknologi Pengelasan Indralaya Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) Absensi Matakuliah Teknologi Pengelasan Indralaya palembang Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) DPNA Metalografi dan Difraksi Indralaya genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) DPNA Metalografi dan Difraksi Palembang genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) DPNA Teknologi pengelasan Indralaya genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) DPNA Teknologi pengelasan Palembang genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) Daftar hadir Metalografi dan Difraksi kelas Palembang Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Bizzy, Irwin and Utami, Nurhabibah Paramitha Eka (2023) DAFTAR KEHADIRAN DOSEN_TKM 342914(2 SKS)_PENGUKURAN TEKNIK_SEMESTER GENAP_Tahun 2O22/2023_22212 (RUANG: E 1213). S1_Teknik Mesin, Palembang.

Bizzy, Irwin and Utami, Nurhabibah Paramitha Eka (2023) DAFTAR KEHADIRAN DOSEN_TKM242714_(2 SKS)_ PENGUKURAN TEKNIK_SEMESTER GENAP_2022/2023_222P2 (RUANG: A-2). S1_Teknik Mesin, Palembang. (Unpublished)

Bizzy, Irwin and Utami, Nurhabibah Paramitha Eka (2023) DPNA_TKM 342914(2 SKS)_PENGUKURAN TEKNIK_SEMESTER GENAP_Tahun 2O22/2023_22212 (RUANG: E 1213). S1_Teknik Mesin, Palembang.

Bizzy, Irwin and Utami, Nurhabibah Paramitha Eka (2023) DPNA_TKM242714_(2 SKS)_ PENGUKURAN TEKNIK_SEMESTER GENAP_2022/2023_222P2 (RUANG: A-2). S1_Teknik Mesin, Palembang.

Nukman, Nukman and Zulkarnain, Zulkarnain and Saputra, Ade and Kaprawi, Kaprawi and Pratiwi, Diah Kusuma and Yanis, Muhammad and Puspitasari, Dewi and Thamrin, Ismail and Hadi, Qomarul and Alian, Helmy and Santoso, Dyos and Gustini, Gustini and SUNDARI, ELLA and yudo, eko and YULIANTO, YULIANTO and bahiuddin, irfan and Firdaus, Aneka and Utami, Nurhabibah Paramitha Eka and Marwani, Marwani and Astuti, Astuti and Ellyanie, Ellyanie and PRAKOSO, AKBAR TEGUH and Suprapto, Bhakti Yudho and Mohruni, Amrifan Saladin and Yani, Irsyadi and Arifin, Amir and Bizzy, Irwin and intang, ambo and Akhyar, Gusri and Irmawan, Irmawan and Hadinata, Febrian and Mardhi, Alim and Gunawan, Gunawan and Adanta, Dendy and Arifin, Fatahul and Homzah, Ozkar Firdausi (2023) SK Pengelola Jurnal Rekayasa Mesin UNSRI 2023. Jurusan Teknik Mesin Unsri.

Chandra, Hendri and Warizal, Warizal and Dahlan, Hatta and Utami, Nurhabibah Paramitha Eka and Tito, A (2023) Similarity of Increase The toughness of material of construction using heat treatment. Ithenticate Universitas sriwijaya. (Submitted)

ALDI, AL FURQAN and Utami, Nurhabibah Paramitha Eka (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP MELALUI PERBEDAAN DIMENSI CETAKAN PASIR SEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

JAGAD, MUHAMMAD SURYA NETRANE and Utami, Nurhabibah Paramitha Eka (2021) ANALISIS KERUSAKAN PADA CHAIN LINK APRON FEEDER. Undergraduate thesis, Sriwijaya University.

NUGRAHA, M. REZA and Utami, Nurhabibah Paramitha Eka (2021) PENGARUH PRE-HEAT PADA PENGELASAN DISSIMILAR ANTARA BAJA KARBON RENDAH DAN TINGGI MENGGUNAKAN LAS SMAW. Undergraduate thesis, Sriwijaya University.

HUTABARAT, ABRAHAM PARTOGI and Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2021) ANALISIS KERUSAKAN PADA BUSHING APRON FEEDER. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Similarity of Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Tribun Sumsel Palembang.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) Similarity_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) The effect of the annealing process and mold variations on failure time of CuZncast alloy by dynamic load. WARSE.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. International Journal of Emerging Trends in Engineering Research, 8 (9). pp. 5688-5692. ISSN 2347 - 3983

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) Similarity The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse, International Journal of Emerging Trends in Engineering Research.

YANDRI, FAKHRI and Utami, Nurhabibah Paramitha Eka (2020) PENGARUH VARIASI DIMENSI CETAKAN LOGAM TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SCRAP DENGAN POLA CIRCLE MOLD. Undergraduate thesis, Sriwijaya University.

AL FAYYAD, MUHAMMAD ANDRO and Utami, Nurhabibah Paramitha Eka (2020) PENGARUH VARIASI DIMENSI CETAKAN PASIR TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SCRAP DENGAN POLA CIRCLE MOLD. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Mataram, Agung and Utami, Nurhabibah Paramitha Eka (2019) Similarity of The characterization of mechanical property and fatigue life of betel-falm fiber composite as envronment-friendly material. Ithenticate Universitas sriwijaya.

SUPARNO, AHMAD AKBAR and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) ANALISA PENGARUH PREHEAT DAN POST WELD HEAT TREATMENT PENGELASAN KOMBINASI GTAW-SMAW PADA BAJA KARBON RENDAH TERHADAP KARAKTERISTIK SIFAT MEKANIK DAN FISIK. Undergraduate thesis, Sriwijaya University.

PRATAMA, YANUAR PUTRA and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) PENGARUH HOT DIPPING BAJA KARBON SS400 DALAM TIMAH (Pb) TERHADAP LAJU KOROSI AIR LAUT. Undergraduate thesis, Sriwijaya University.

ARDINATA, ARIZON and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) PENGARUH HOT DIPPING BAJA SS400 DALAM Zn TERHADAP LAJU KOROSI DALAM AIR LAUT. Undergraduate thesis, Sriwijaya University.

Pratiwi, Diah Kusuma and Chandra, Hendri and Utami, Nurhabibah Paramitha Eka and Irawan, Okta and PURBA, ARMAN NATAL (2018) Similarity of Damage Analysis of Moldboard Plow. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2017) Similarity Effect of ageing time 200 °C on microstructure behaviour of Al-Zn-Cu-Mg cast alloys. matec, sicest2016.

Utami, Nurhabibah Paramitha Eka and Chandra, Hendri (2017) Similarity of Mechanical properties analysis of Al-9Zn-5Cu-4Mg cast alloy by T5 heat treatment. Ithenticate Universitas sriwijaya.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2016) ANALISA PENGARUH HISTERISIS TERHADAP NILAI KEKERASAN BAJA KARBON MEDIUM. In: SEMINAR NASIONAL AVOER 8 Applicable Innovation of Engineering and Science Researches, 19‐20 Oktober 2016, Palembang, Indonesia.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2016) ANALISA PERILAKU PATAH TARIK PADUAN Al-9Zn-5Cu-4Mg COR TERHADAP PERLAKUAN PANAS T5. Fakultas Teknik Universitas Sriwijaya.