Items where Author is "Chandra, Hendri"

PRATAMA, MUHAMMAD BAGUS HERRU and Chandra, Hendri (2024) ANALISIS KEKUATAN TARIK DAN KEKERASAN SAMBUNGAN LAS PADA PIPA ASTM A53 GRADE A. Undergraduate thesis, Sriwijaya University.

CHRISDIANTONO, ROLAN and Chandra, Hendri (2024) ANALISA PERMUKAAN PATAH LELAH PADA MATERIAL BAJA ASTM A - 36 MENGGUNAKAN SCANNING ELECTRON MICROSCOPE. Masters thesis, Sriwijaya University.

Chandra, Hendri (2024) Preventing environmental and health problems due to LPG transport tank leaks: fatigue and crack behavior of heat-treated steel investigation. Preventing environmental and health problems due to LPG transport tank leaks: fatigue and crack behavior of heat-treated steel investigation, 11 (1). pp. 1-13.

Chandra, Hendri (2023) Similarity of Analisa Pertumbuhan Retak Pada Al 7075-T6 Dengan Menggunakan Mesin Uji Lentur 3 Titik. Ithenticate Universitas sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and Chandra, Hendri and Susmanto, Prahady and LIFIA, LIFIA and Zanadiya, Sanas (2023) Similarity of Produksi Air Bersih Dari Pengolahan Limbah Cair Songket Menggunakan Proses Pemisahan Membran Bioreaktor. Ithenticate Universitas sriwijaya. (Submitted)

Ojahan R, Tumpal and Chandra, Hendri and Pratiwi, Diah Kusuma (2023) Similarity of The Influence of Matrix Banana Stem Fiber Volume Fraction Recycled Polypropylene (RPP) Toward Bending Test. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Basri, Hasan (2023) Similarity of Analisis Fatigue Poros Pompa Vakum. Ithenticate Universitas sriwijaya. (Submitted)

Utami, Nurhabibah Paramitha Eka and Chandra, Hendri and Firdaus, Aneka (2023) Similarity of Rancang Bangun Kompor Rumah Tangga Dengan Bahan Bakar Sisa Limbah Kayu Sebagai Alternatif LPG Bagi Masyarakat Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma (2023) DPNA Analisa Kerusakan Material. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Chandra, Hendri and Yani, Irsyadi and Yanis, Muhammad and Wibowo, F (2023) SIMILARITY OF INOVASI RANCANG BANGUN ALAT BANTU MEKANIK SISTEM BUKA TUTUP BAUT RODA KENDARAAN RODA EMPAT YANG EFEKTIF DAN EFISIEN. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Iwansyah, M (2023) Similarity of Kaji Eksperimen Sifat Mekanik Material Komposit Polyester berpenguat serat kelapa sawit dengan orientasi arah serat sejajar. Ithenticate Universitas sriwijaya. (Submitted)

RAFLI, MUHAMMAD and Chandra, Hendri (2023) STRESS DAN FATIGUE ANALYSIS PADA TRANSPORT TANK SA-516 GR. 70 MENGGUNAKAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijiaya University.

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) Similarity of Teknologi Pengelasan Bagi Pengusaha Dan Pekerjaan Di Bidang Las Di Kecamatan Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and PUTRA, DICKY PRATAMA and Romli, Romli (2023) SIMILARITY OF INVESTIGASI TEGANGAN PADA POROS BERTINGKAT MENGGUNAKAN METODE ELEMEN HINGGA BERBASIS COMPUTER AIDED ENGINEERING. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma (2023) DPNA Mekanika retak. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Chandra, Hendri (2023) BERITA ACARA PROPOSAL DISERTASI Aria WiraYuda "Perkerasan Permukaan Titanium Murni Grade 1 dengan Metode Powder Nitriding Berbahan Urea". Doctoral thesis, Univerisity of Sriwijaya.

ADITYA, DIMAS and Chandra, Hendri (2023) ANALISIS KETANGGUHAN DAN KETAHANAN LELAH BAJA KONSTRUKSI LAS PADA BEJANA TEKAN TRANSPORT TANKS. Undergraduate thesis, Sriwijaya University.

Nukman, Nukman and Saggaff, Anis and Nawawi, Zainudin and Basri, Hasan and Kaprawi, Kaprawi and Said, Muhammad and Mohruni, Amrifan Saladin and Stiawan, Deris and Sipahutar, Riman and Buchari, Erika and Ibrahim, Eddy and Nurmaini, Siti and Agustina, Tuty Emilia and Suprapto, Bhakti Yudho and fransiska, widya and Yani, Irsyadi and Mataram, Agung and Arifin, Amir and Yanis, Muhammad and Sidik, Muhammad Abu Bakar and Saloma, Saloma and ermatita, ermatita and Arita, Susila and Bahrin, David and Resti, Yulia and Jambak, Muhammad Irfan and abdiansyah, abdiansyah and Rini, Dian Palupi and kunang, Yesi Novaria and Tutuko, Bambang and firdaus, firdaus and Hartono, Yusuf and Yusuf, Maulana and Taqwa, Ridhah and Kadarsa, Edi and Agustien, Melawaty and Siswanto, Ari and Mohadi, Risfidian and Melwita, Elda and Nurjannah, Siti Aisyah and Aminuddin, K. M. and Pratiwi, Diah Kusuma and Pahendra, Iwan and Dwijayanti, Suci and Erwin, Erwin and Sukemi, Sukemi and Hariani, Poedji Loekitowati and ferdiansyah, ferdiansyah and Rahayu, Wiwik and Moerwanto, A. S. and antoni, darius and Komariah, Leily Nurul and Samsuryadi, Samsuryadi and Barlin, Barlin and muhamad, muhamad and Partan, Radiyati Umi and Sutriyono, Edy and Setiawan, Budhi and Hadinata, Febrian and Bustan, M. Djoni and Haryati, Sri and widhiarso, Wijang and safaatunnur, unnur and Dewi, Tresna and Handayani, Sri and Rosidawani, Rosidawani and Husni, Nyayu Latifah and Anugrah Putranto, Dinar Dwi and Setiawan, Herri and Nasir, Subriyer and Budianta, Dedik and ridwan, muhammad and Sofijan, Armin and Lim, Taih Cheng and Chandra, Hendri and Syahrom, Ardiyansyah and Badaruddin, Muhammad and Sharif, Safian and Roni, Kiagus Ahmad and putra, Syaofiansyah Jaya and Suryadi, Fransiscus Xaverius and krispantono, - and oktarina, Maya Ftri (2023) KEPUTUSAN DEKAN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA Nomor: 1136/UN9.FT/TU.SK/2023 Tentang BEBAN KERJA DOSEN PADA PROGRAM STUDI PROGRAM DOKTOR FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GANJIL TAHUN AKADEMIK 2023/2024. FT UNSRI S3. (Unpublished)

Chandra, Hendri and Saputra, Azwar (2023) SIMILARITY OF ANALISIS TEGANGAN PADA BEJANA TEKAN LPG KAPASITAS 3 kg DENGAN BANTUAN SOFTWARE ABAQUS 6.14. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Darmawi, Darmawi and Riandagi, Aidil Firsa (2023) Similarity of Analisa Tegangan Tube Bundle pada Reboiler Unit DHP E-460 dengan Menggunakan Autodesk Inventor. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Darmawi, Darmawi and Rianda, Aidil Firsa (2023) Similarity of Analisa Tegangan Tube Bundle pada Reboiler Unit DHP E-460 dengan Menggunakan Autodesk Inventor. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Warizal, Warizal and Dahlan, Hatta and Utami, Nurhabibah Paramitha Eka and Tito, A (2023) Similarity of Increase The toughness of material of construction using heat treatment. Ithenticate Universitas sriwijaya. (Submitted)

PUTRA, RISKY UTAMA and Basri, Hasan and PRAKOSO, AKBAR TEGUH and Chandra, Hendri and AMARULLAH, MUHAMMAD IMAM (2023) Similarity of Level of Activity Changes Increases the Fatigue Life of the Porous Magnesium Scaffold, as Observed in Dynamic Immersion Tests, over Time. Ithenticate Universitas sriwijaya.

Chandra, Hendri (2023) Similarity of Mekanika Retak Kondisi Linear Elastis. Turnitin Universitas Sriwijaya. (In Press)

HAFIDZ, M DZAKY and Chandra, Hendri (2022) KARAKTERISTIK PATAH DAN KETAHANAN LELAH BESI COR MALLEABLE. Undergraduate thesis, Sriwijaya University.

ALMAHESA, M. ANDRI ADITYA and Chandra, Hendri (2022) ANALISIS DISTRIBUSI TEGANGAN,REGANGAN DAN PERPINDAHAN PADA TANKI ATAP KERUCUT MENGGUNAKAN PERANGKAT LUNAK SOLIDWORKS 2020. Undergraduate thesis, Sriwijaya University.

FERNANDES, ALFIAN LUIS and Chandra, Hendri (2022) KETAHANAN LELAH BAJA KONSTRUKSI PEGAS DAUN DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

BUTAR BUTAR, POLADO POWER and Chandra, Hendri (2022) KETAHANAN LELAH BESI COR NODULAR DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Abdi, Jusran and Homzah, Homzah and F, Ozkar and Basri, Hasan and Azhari, Ikbal (2022) SIMILARITY OF DESIGN OF AUTOCLAVE FOR FRESH SHRIMP STERILIZATON PROCESS USING FINITE ELEMENT ANALYSIS. Ithenticate Universitas sriwijaya. (Submitted)

Mahendra, Nanda Yusril and PUTRA, DICKY PRATAMA and AKBAR, IMAM and PUTRA, RISKY UTAMA and P, AKBAR TEGUH and Yanis, Muhammad and Chandra, Hendri and Syahrom, Ardiyansyah and Amarullah, Muhammad Imam and Jamari, J and Basri, Hasan (2021) Similarity of Narrative Review of Subchondral Bone Morphology on Cartilage Damage (Osteoarthritis). Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Similarity of Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Tribun Sumsel Palembang.

SINAGA, MORRYS SP and Chandra, Hendri (2020) ANALISIS TEGANGAN PADA EXHAUST VALVE MOTOR HONDA SUPRA X 125CC MENGGUNAKAN SOFTWARE ABAQUS. Undergraduate thesis, Sriwijaya University.

GIOVANNI, DIONISIUS and Chandra, Hendri (2020) PERANCANGAN SHAFT DRIVE PULLEY SP 1600 PADA SISTEM BELT CONVEYOR PT BUKIT ASAM. Undergraduate thesis, Sriwijaya University.

HIDAYAT, M. AWALUDDIN TAUFIK and Chandra, Hendri (2020) EVALUASI BEBAN DAN UMUR PAKAI BANTALAN PADA ROLLER IDLER BELT CONVEYOR. Undergraduate thesis, Sriwijaya University.

AFRIANSYAH, AFRIANSYAH and Chandra, Hendri and Pratiwi, Diah Kusuma and Firdaus, Aneka (2020) SIMILARITY OF FATIGUE FAILURE ON DRILLING PIPE THREAD A CASE STUDY ON DRILL PIPE SS105. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Lestari, V (2020) Similarity of Analysis of the Effect of Stop Drilled Hole Diameter Variation on Fatigue Resistance in Medium Carbon Steel DIN HQ 705. Ithenticate Universitas sriwijaya. (Submitted)

Falisa, Falisa and Chandra, Hendri and Harnani, Harnani (2020) Similarity of Geochemical Studies of claystone Based on Analysis of Scnnine Electron Microscope (SEM), Talang sawah, Merapi district and surroundin of Lahat Regency, South Sumatera. Ithenticate Universitas sriwijaya.

Falisa, Falisa and Chandra, Hendri and Harnani, Harnani (2020) Similarity of Studi Geokimia Batuan Beku Andesit Berdasarkan XRD Desa Karang Jaya, Musi Rawas Sumatera Selatan. Ithenticate Universitas sriwijaya. (Submitted)

PERMADI, MUHAMMAD RAFSANJANI and Chandra, Hendri (2019) ANALISI TEGANGAN PADA BOX HEADER PENAMPANG PERSEGI EMPAT MENGGUNAKAN 3-D FEM DENGAN PERANGKAT LUNAK ABAQUS. Undergraduate thesis, sriwijaya university.

Chandra, Hendri (2019) Berita Acara Proposal Disertasi Indra Surya. Doctoral thesis, Univerisity of Sriwijaya.

Chandra, Hendri (2019) RPS PERLAKUAN PANAS DAN PERMUKAAN. [Teaching Resource]

Pratiwi, Diah Kusuma and Chandra, Hendri and Mataram, Agung (2019) ANALISA KERUSAKAN MATERIAL. [Teaching Resource]

Chandra, Hendri (2019) Berita Acara Proposal Disertasi Helmi Alian. Doctoral thesis, Univerisity of Sriwijaya.

Chandra, Hendri and Nukman, Nukman and Sianturi, Baodadi (2019) Similarity of Analysis of Fatigue Life and Crack Propagation characterization of Gray Cast Iron Under Normalizing Process. Ithenticate Universitas sriwijaya, UNSRI. (Submitted)

Chandra, Hendri (2019) Similarity of Mechanical fracture characterization of rice kernel under milling process. Ithenticate Universitas sriwijaya.

Mgs, Halim and Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2019) Similarity of Sustainable Development of Lubricator to Optimization Process of Lubrication in Wire Rope Sling. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Mataram, Agung and Utami, Nurhabibah Paramitha Eka (2019) Similarity of The characterization of mechanical property and fatigue life of betel-falm fiber composite as envronment-friendly material. Ithenticate Universitas sriwijaya.

SAPUTRA, YOGI and Chandra, Hendri (2018) ANALISIS KEKUATAN TALI BAJA PADA GANTRY CRANE DENGAN MENGGUNAKAN METODE ANALITIS. Undergraduate thesis, Sriwijaya University.

KHABIBI, M RASYID and Chandra, Hendri (2018) PERANCANGAN DAN PENGEMBANGAN ALAT PEMBUKA MUR PADA BAUT RODA KENDARAAN BESAR. Undergraduate thesis, Sriwijaya University.

HARYO, ADRIAN EKA and Chandra, Hendri (2018) RANCANG BANGUN ALAT “CONCRETE MIXER” UNTUK KAPASITAS 100 KILOGRAM. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Darmawi, Darmawi and Rianda, Rianda Aidil Firsa (2018) Analisa Tegangan Tube Bundle pada Reboiler Unit DHP E-460 dengan Menggunakan Autodesk Inventor. SUMSEL CORROSION COMMUNITY, 1 (1). pp. 14-18.

Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2018) Corresponding author of High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Helyon.

Pratiwi, Diah Kusuma and Chandra, Hendri and Utami, Nurhabibah Paramitha Eka and Irawan, Okta and PURBA, ARMAN NATAL (2018) Similarity of Damage Analysis of Moldboard Plow. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Luthfi, Muhammad Indra and Fauziana, Lamin and Ariffin, Ahmad Kamal (2018) Similarity of Evaluation of Torsional Vibration on Vertical-type Centrifugal Pump Shaft. Ithenticate Universitas sriwijaya.

Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2018) Similarity of High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Ithenticate Universitas sriwijaya.

Saputra, Yogi and Chandra, Hendri (2017) Analisis Kekuatan Tali Baja (Wire Rope) Pada Alat Angkat Gantry Crane Pada Proyek Pembangunan Lrt (Light Rail Transit) Zona 5 Palembang. In: UNIID.

Saputra, Yogi and Chandra, Hendri (2017) SIMILARITY OF ANALISIS KEKUATAN TALI BAJA (WIRE ROPE) PADA ALAT ANGKAT GANTRY CRANE PADA PROYEK PEMBANGUNAN LRT (LIGHT RAIL TRANSIT) ZONA 5 PALEMBANG. Fakultas Teknik UNSRI.

Utami, Nurhabibah Paramitha Eka and Chandra, Hendri (2017) Similarity of Mechanical properties analysis of Al-9Zn-5Cu-4Mg cast alloy by T5 heat treatment. Ithenticate Universitas sriwijaya.

Chandra, Hendri and ANDRI, MUHAMMAD (2016) SIMILARITY OF ANALISIS TEGANGAN SHAFT DRIVE PULLEY PADA BELT CONVEYOR DI PT. BUKIT ASAM (PERSERO) TBK. TANJUNG ENIM. Ithenticate Universitas sriwijaya. (Submitted)

ANDRI, MUHAMMAD and Chandra, Hendri (2016) ANALISIS TEGANGAN SHAFT DRIVE PULLEY PADA BELT CONVEYOR DI PT. BUKIT ASAM (PERSERO) Tbk. TANJUNG ENIM. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Saputra, Azwar (2016) Analisis Tegangan Pada Bejana Tekan LPG Kapasitas 3 Kg dengan Bantuan Software Abaqus 6.14. In: Avoer 2016, 2016, Palembang, Indonesia.

Chandra, Hendri (2014) Hubungan Varietas Padi (Oryza Sativa L) dan Kompon Rol Terhadap Gaya Gesek dan Perilaku Retak. Manual. UNSRI.

Yahya, Yahya and Nukman, Nukman and Chandra, Hendri (2013) The Carburizing Process of Low Carbon Steel with Charcoal Media. Journal of Mechanical Science and Engineering,, 1 (1). pp. 1-6. ISSN 2354-9467

Yahya, Yahya and Nukman, Nukman and Chandra, Hendri (2013) Similarity of The Carburizing Process of Low Carbon Steel with Charcoal Media. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri (2012) PERANCANGAN MESIN FATIGUE PEMBEBANAN TIGA TITIK DAB EMPAT TITIK DALAM MENCIPTAKAN DAN PERAMBATAN RETAK. "Prosiding SNMI 12 Seminar Nasional Mesin dan Industri (SNMI7) 2012.

Chandra, Hendri (2012) Similarity of Perancangan Mesin Fatigue Pembebanan tiga titik dan empat titik dalam menciptakan retak awal dan perambatan retak. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri (2011) Similiarity of Hubungan Varietas Padi (Oryza Sativa L) dan Kompon Rol Terhadap Gaya Gesek dan Perilaku Retak. Turnitin Universitas Sriwijaya. (Unpublished)

Arifin, Amir and Akhmad, Al Antoni and Mohruni, Amrifan Saladin and Sipahutar, Riman and Chandra, Hendri and Burlian, Firmansyah and Abidin, Zainal and Firdaus, Aneka and Marwani, Marwani and Gunawan, Gunawan (2010) PELATIHAN PEMBUATAN E-LEARNING BERBASIS WEB DENGAN MENGGUNAKAN PROGRAM MOODLE UNTUK GURU SMU PGRI INDRALAYA. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Chandra, Hendri and Basri, Hasan (2007) Analisis Fatigue Poros Pompa Vakum. SATEK 2007, 1 (1). Lembaga Penelitian Universitas Lampung, Bandar Lampung, Indonesia. ISBN 978-979-15535-2-0

PURWA, AL AFIF and Chandra, Hendri (2007) ANALISIS KERUSAKAN CONNECHNG ROD PADA MESIN DIESEL TIPE S6D95L-1. Undergraduate thesis, Sriwijaya University.

ORTEGA, SHAKA EKA and Chandra, Hendri (2007) LAJU KOROSI PADA BAJA KARBON DALAM LINGKUNGAN AIR LAUT SETELAH MENGALAMI PERLAKUAN QUENCIHNG BAN ANNEALING. Undergraduate thesis, Sriwijaya University.

AFRIZAL, DIAN and Chandra, Hendri (2007) ANALISA KEGAGALAN TUBE HEAT EXCHANGER 3A-115-C DI PABRIK AMONIA. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri and Afrizal, Dian (2006) Analisa Kegagalan Tube Heat Exchanger 3A-115-C di pabrik Amonia. "Jurnal rekayasa mesin" universitas Sriwijaya fakultas teknik, jurusan teknik mesin, 6 (2). pp. 24-31. ISSN 1411-6553 vol. 6- No 2 September 2006

SANJAYA, SANJAYA and Chandra, Hendri and Pratiwi, Diah Kusuma (2006) MODIFIKASI ALAT UJI TAK MERUSAK (NDT) TIPE SERBUK MAGNETIK JENIS YOKE. Undergraduate thesis, Sriwijaya University.

Chandra, Hendri (2004) KAJI EKSPERIMENTAL PEMBUATAN BESI COR KELABU FC 250 DENGAN TANUR INDUKSI FREKUENSI TINGGI. "Jurnal rekayasa" sriwijaya, 9 (1). pp. 24-30. ISSN 0852-5366

Chandra, Hendri (2003) KAJI EKSPERIMEN PENGELASAN TIG UNTUK PADUAN ALUMINIUM DENGAN MEN GGUNAKAN BUSUR GAS ARGON (Ar)DAN GAS HELIUM (He). "Jurnal Rekayasa Mesin "Universitas Sriwijaya Fakultas Teknik Jurusan Teknik Mesin, 3 (2). pp. 18-21. ISSN 1411-6553

Chandra, Hendri (1994) ANALISIS KEGAGALAN BAJA TAHAN KARAT 316 L PADA KOMPONEN TUBE FEED DARI SENTRIFUGE. Master thesis, UNSRI.

Chandra, Hendri Analisa Pertumbuhan Retak Pada Al 7075-T6 Dengan Menggunakan Mesin Uji Lentur 3Titik. "Prosiding seminar nasional tahunan teknik mesin (SNTTM) V " Universitas Indonesia. ISSN 979-97726-8-0

Chandra, Hendri Analisis Kegagalan Material. UNSRI. (Submitted)

Chandra, Hendri BE,RITA ACARA PROPOSAL DISERTASI RISKY UTAMA PUTRA "PERILAKU FATIGUE LIFE PERANCAH TULANG KOMPOSIT PLA/MG UNTUK APLIKASI MEDIS". Koordinator Prodi. Prof. Dr. Ir. Nukrnan. M.1'. (Submitted)

Chandra, Hendri Berita Acara Sidang S3 Hendri Chandra. Hendri Chandra.

Chandra, Hendri Corresponding Author of Mechanical fracture characterization of rice kernel under milling process. Hendri Chandra. (Submitted)

Chandra, Hendri Corresponding Author of The characterization of mechanical property and fatigue life of betel-falm fiber composite as environmentally-friendly material. Hendri Chandra. (Submitted)

Chandra, Hendri Rotating fatigue machie. [Image] (Unpublished)

Chandra, Hendri SK Dekan 0071/UN9.FT/TU.SK/2023 Penguji Program Doktor Mahasiswa a/n Faizal Fasa (3013682126028) Teknik Mesin. SK Dekan. (Submitted)

Chandra, Hendri SK Rektor 0584/UN9.FT/TU.SK/2019 Penguji Program Doktor Mahasiswa a/n Helmy Alian (03043681722002) Teknik Mesin. SK Rektor. (Submitted)

Chandra, Hendri SK Rektor 0958/UN9.FT/TU.SK/2021 Pembimbing Program Doktor Mahasiswa a/n Indra Surya (03043681823009) Teknik Mesin. SK Rektor. (Submitted)

Chandra, Hendri SK Rektor 0958/UN9.FT/TU.SK/2021 Penguji Program Doktor Mahasiswa a/n Indra Surya (03043681823009) Teknik Mesin. SK Rektor. (Submitted)

Chandra, Hendri SK Rektor 1167/UN9.FT/TU.SK/2022 Pembimbing Program Doktor Mahasiswa a/n Risky Utama Putra (03013682126001) Teknik Mesin. SK Rektor. (Submitted)

Chandra, Hendri Sertifikat Pemakalah AVOER VIII Hendri Chandra. AVOER VIII. (Submitted)

Chandra, Hendri Sertifikat Pemakalah AVOER XI Hendri Chandra. AVOER XI. (Submitted)

Chandra, Hendri Sertifikat Pemakalah AVOER XII Hendri Chandra. AVOER XII. (Submitted)

Chandra, Hendri Sertifikat Pemakalah FIRST 2019 Hendri CHandra. FIRST 2019. (Submitted)

Chandra, Hendri Sertifikat Pemakalah SENTEN 2018 Hendri Chandra. SENTEN 2018. (Submitted)

Chandra, Hendri Sertifikat Pemakalah SICEST 2018 Hendri Chandra. Sriwijaya International Conference on Science, Engineering, and Technology 15–16 October 2018, Palembang, Indonesia.

Chandra, Hendri Sertifikat Pemakalah SICEST 2018 Hendri Chandra. SICEST 2018. (Submitted)

Chandra, Hendri Sertifikat Pemakalah Siceto Hendri Chandra. SICETO 2021.

Chandra, Hendri Similiarity of Effect of 3D Printing Process Parameters on Flexural Strength of Mixing PLA and PCL Polymer. SICETO 2021.

Chandra, Hendri Similiarity of Failure analysis of pulverizer pipe elbow in PLTU boiler. Institute for Advanced Science, Social, and Sustainable Future.

Chandra, Hendri Similiarity of Karakteristik Patah dan Ketahanan Lelah Besi Cor Malleable. Jurnal Rekayasa Mesin Universitas Brawijaya.

Chandra, Hendri Similiarity of Pelatihan Penerapan ISO R230 Untuk Uji Kelayakan dan Perawatan Mesin Perkakas dalam Meningkatkan Kualitas pada Pembuatan Komponen Mesin. Jurnal Pelita Sriwijaya. (Submitted)

Chandra, Hendri Tugas Tambahan untuk Guru Besar. -. (Submitted)