Items where Author is "Royani, Idha"

LESTARI, YENI PUJI and Royani, Idha and Jorena, Jorena (2024) PENGARUH KONSENTRASI CROSSLINKER DALAM POLIMERISASI MATERIAL BERBASIS ION IMPRINTED POLYMERS Pb(II) MENGGUNAKAN METODE COOLING-HEATING. Undergraduate thesis, Sriwijaya University.

ALFIKRO, MUHAMMAD IHSAN and Royani, Idha and Monado, Fiber (2024) PERBEDAAN CROSSLINK KIMIAWI PADA MEMBRAN SERAT NANO BERBASIS PVA (POLYVINYL ALCOHOL) UNTUK REMEDIASI ION Fe(III) DALAM AIR. Masters thesis, Sriwijaya University.

WAHYUDI, ARTHA RICKY and Royani, Idha and Saleh, Khairul (2024) RANCANG BANGUN ALAT UKUR KONSENTRASI ION TIMBAL (II) BERBASIS MIKROKONTROLLER NODEMCU ESP32 MENGGUNAKAN METODE POTENSIOMETRI DENGAN SISTEM SENSOR SUHU DS18B20 PARALEL. Undergraduate thesis, Sriwijaya University.

HALOHO, SAHAT MARULI TUA and Royani, Idha and Jorena, Jorena (2024) OPTIMASI SINTESIS NANOFIBER-IIPS-Pb(II) BERBASIS ION IMPRINTED POLYMERS MATERIAL CERDAS ADSORBEN Pb(II) MELALUI VARIASI TEGANGAN MENGGUNAKAN METODE ELECTROSPINNING. Undergraduate thesis, Sriwijaya University.

MAHFUZAH, DINI MIRZA and Royani, Idha and Satya, Octavianus Cakra (2024) RANCANG BANGUN ALAT UKUR KONSENTRASI ION TIMBAL(II) BERBASIS MIKROKONTROLLER NODEMCU ESP32 MENGGUNAKAN METODE POTENSIOMETRI. Undergraduate thesis, Sriwijaya University.

HIJRAH, MUHAMMAD and Royani, Idha and Arsyad, Fitri Suryani (2024) DESAIN FAKTORIAL DALAM OPTIMASI ADSORPSI POLIMER TERCETAK ION Fe(III): STUDI KASUS EKSTRAKSI POLIMER IIPs-Fe(III). Masters thesis, Sriwijaya University.

PERMANA, I GUSTI PUTU ARYA TIRTA and Royani, Idha and Satya, Octavianus Cakra (2023) OPTIMASI SENSITIVITAS SISTEM PENGUKURAN KONSENTRASI ION FE(III) DENGAN POTENSIOMETRI BERBASIS ION IMPRINTED POLYMERS MENGGUNAKAN ESP32. Undergraduate thesis, Sriwijaya University.

NABABAN, NIKO ADI ALVREDO and Royani, Idha and Bangun, Jorena (2023) OPTIMASI FABRIKASI MEMBRAN NANOFIBER IIPS-FE (III) MATERIAL CERDAS ION IMPRINTED POLYMERS SEBAGAI ADSORBEN FE3+ DENGAN METODE ELECTROSPINNING. Undergraduate thesis, Sriwijaya University.

SASTIA, ETI DESTI and Royani, Idha and Jorena, Bangun (2023) PENGARUH PELARUT HCl 6M PADA VARIASI EKSTRAKSI DALAM PEMBENTUKAN RONGGA Fe(III)-IIPs (ION IMPRINTED POLYMERS) MENGGUNAKAN METODE COOLING-HEATING. Undergraduate thesis, Sriwijaya University.

Arsyad, Fitri Suryani and Royani, Idha and Taher, Tarmizi and Lesbani, Aldes (2023) High regeneration of ZnAl/NiAl-Magnetite humic acid for adsorption of Congo red from aqueous solution. High regeneration of ZnAl/NiAl-Magnetite humic acid for adsorption of Congo red from aqueous solution, 150. ISSN 13877003

Mohadi, Risfidian and Royani, Idha and Mardiyanto, Mardiyanto (2023) Pillarization of Sumatera Bentonite by Sodium-assisted as Effective Adsorbent of Anionic Surfactants Sodium Lauryl Sulphate (SLS) Waste. Bulletin of Chemical Reaction Engineering & Catalysis, 18 (1). pp. 48-58. ISSN 19782993

Edianta, Jaya and Cakra Satya, Octavianus and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) Corespondence author of REVIEW OF ION IMPRINTED POLYMERS NANOFIBER WITH TECHNOLOGY ELECTROSPINNING: AN ADVANCED MATERIALS FOR REMOVAL OF HEAVY METAL IONS. Drupal. org.

Edianta, Jaya and Cakra Satya, Octavianus and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) REVIEW OF ION IMPRINTED POLYMERS NANOFIBER WITH TECHNOLOGY ELECTROSPINNING: AN ADVANCED MATERIALS FOR REMOVAL OF HEAVY METAL IONS. Journal of Chemical Technology and Metallurgy, 58 (4). pp. 731-748. ISSN (e) 1314-7978; (p) 1314-7471

Edianta, Jaya and Cakra Satya, Octavianus and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) Review of Ion Imprinted Polymers Nanofiber With Technology electrospinning: An Advanced Materials for Removal of Heavy Metal Ions. Journal of Chemical Technology and Metallurgy, 58 (4). pp. 731-748. ISSN e-ISSN 1314-7978 ; p-ISSN 1314-7471

Arsyad, Fitri Suryani and Royani, Idha and Mohadi, Risfidian and Lesbani, Aldes (2023) Catalytic oxidative desulfurization of dibenzothiophene by heterogeneous M2+/Al-layered double hydroxide (M2+ = Zn, Mg, Ni) modified zinc oxide. IRANIAN JOURNAL OF CATALYSIS, 13 (1). pp. 35-45. ISSN 23454865

Hakim, Yusuf Mathiinul and Mohadi, Risfidian and Mardiyanto, Mardiyanto and Royani, Idha (2023) Ammonium-Assisted Intercalation of Java Bentonite as Effective of Cationic Dye Removal. Journal of Ecological Engineering, 24 (2). pp. 184-195. ISSN 2299-8993

Hakim, Yusuf Mathiinul and Risfidian, Mohadi and Mardiyanto, Mardiyanto and Royani, Idha (2023) Ammonium-Assisted Intercalation of Java Bentonite as Effective of Cationic Dye Removal (Correspondence author). Polish Society of Ecological Engineering (PTIE), Lublin University of Technology, POLAND., Poland.

Arsyad, Fitri Suryani and Royani, Idha and Lesbani, Aldes (2023) Charcoal activated as template Mg/Al layered double hydroxide for selective adsorption of direct yellow on anionic dyes. Results in Chemistry, 5. pp. 1-8. ISSN 22117156

Mohadi, Risfidian and Mardiyanto, Mardiyanto and Royani, Idha (2023) Ammonium-Assisted Intercalation of Java Bentonite as Effective of Cationic Dye Removal. Journal of Ecological Engineering (JEE), 24 (2). pp. 184-195. ISSN 22998993

Satya, Octavianus Cakra and Saleh, Khairul and Virgo, Frinsyah and Monado, Fiber and Royani, Idha (2023) Review of Ion Imprinted Polymers Nanofiber with Technology Electrospinning: An Advanced Materials For Removal of Heavy Metal Ions. Journal of Chemical Technology and Metallurgy, 58 (4). pp. 731-748. ISSN University of Chemical Technology and Metallurgy

Royani, Idha and Koriyanti, Erry (2022) Analisis Molecullary Imprinted Polymer (MIP) Nano Melamin (C3H6N6) Sebagai Material Sensor. Jurnal Penelitian Sains, 24 (3). pp. 154-159. ISSN 1410-7058

Arsyad, Fitri Suryani and Royani, Idha (2022) Biodegradable Foam (Bio-foam) from Banana Weevil as an Environmentally Friendly Styrofoam Generation. Gravitasi, 21 (2). pp. 44-48. ISSN 14122375

AFRIZAL, NOPA and Royani, Idha and Saleh, Khairul (2022) RANCANG BANGUN SISTEM PENGUKURAN KONSENTRASI ION LOGAM Fe(III) MENGGUNAKAN METODE POTENSIOMETRI BERBASIS WEBSITE. Undergraduate thesis, Sriwijaya University.

ERNITA, ERNITA and Koriyanti, Erry and Royani, Idha (2022) RANCANGAN SISTEM KOMUNIKASI DATA HASIL PENGUKURAN SENSOR NANO MELAMIN BERBASIS INTERNET OF THINGS (IOT). Undergraduate thesis, Sriwijaya University.

Arsyad, Fitri Suryani and Royani, Idha and Lesbani, Aldes (2022) Adsorption of methylene blue on magnetite humic acid: Kinetic, isotherm, thermodynamic, and regeneration studies. Results in Chemistry, 4. pp. 1-10. ISSN 22117156

Arsyad, Fitri Suryani and Royani, Idha and Lesbani, Aldes (2022) Selectivity of Malachite Green on Cationic Dye Mixtures Toward Adsorption on Magnetite Humic Acid. Environment and Natural Resources Journal, 20 (6). pp. 634-643. ISSN 16865456

ALVIAH, RETNO and Koriyanti, Erry and Royani, Idha (2022) RANCANG BANGUN PENDETEKSI MELAMIN PADA ALAT MAKAN BERBAHAN MELAMIN BERBASIS MIKROKONTROLER ARDUINO NANO. Undergraduate thesis, Sriwijaya University.

ALFIKRO, MUHAMMAD IHSAN and Royani, Idha and Jorena, Jorena (2022) VARIASI KONSENTRASI LARUTAN PREKURSOR TERHADAP KINERJA NANO FIBER ION IMPRINTED POLYMERS (NF-IIPS FE(III)) SEBAGAI ADSORBEN ION FE(III) YANG DISINTESA DENGAN METODE ELECTROSPINNING. Undergraduate thesis, Sriwijaya University.

Vionita, Via and Monado, Fiber and Ariani, Menik and Royani, Idha (2022) Perhitungan Desain Konsep Reaktor Cepat Berpendingin Karbondioksida Superkritis dan Berbahan Bakar Uranium Metalik Alam. Jurnal Teori dan Aplikasi Fisika, 10 (2). pp. 243-250. ISSN 2303016X

ANGQUNA, LESTIANI and Koriyanti, Erry and Royani, Idha (2022) PERANCANGAN ALAT UKUR KONSENTRASI MELAMIN BERBASIS MIKROKONTROLER NODEMCU ESP8266 MENGGUNAKAN MOLECULARLY IMPRINTED POLYMER (MIP) NANO MELAMIN. Undergraduate thesis, Sriwijaya University.

RISTIKA, ADE and Monado, Fiber and Royani, Idha (2022) STUDI PERHITUNGAN SEL BAHAN BAKAR NUKLIR BERBASIS URANIUM METAL (U-10%wtZr) DENGAN TAMBAHAN MINOR AKTINIDA MENGGUNAKAN SOFTWARE SRAC. Undergraduate thesis, Sriwijaya University.

NOVIANTY, NOVIANTY and Royani, Idha and Bangun, Jorena (2022) VARIATION OF CONCENTRATION OF ACID SOLVENTS (HCl AND HNO3) IN THE EXTRACTION PROCESS OF FE (III)-IIPS (ION IMPRINTED POLYMERS) AGAINST THE NUMBER OF CAVITIES FORMED BY THE COOLING-HEATING METHOD. Undergraduate thesis, Sriwijaya University.

Kartika, Hesti Dwi and Jorena, Jorena and Monado, Fiber and Royani, Idha (2022) Analisis Jumlah Rongga Tercetak pada Ion Imprinted Polymer (IIPs)-Fe(III) Yang disintesis menggunakan Metode Cooling-heating. Jurnal Penelitian Sains, 24 (1). pp. 18-23. ISSN 1410-7058

Hakim, Yusuf Mathiinul and Mohadi, Risfidian and Mardiyanto, Mardiyanto and Royani, Idha (2022) Ammonium-Assisted Intercalation of Java Bentonite as Effective of Cationic Dye Removal (Similarity). Turnitin Universitas Sriwijaya, Poland. (Submitted)

Ahmad, Nur and Fitri, Erni Salasa and Wijaya, Alfan and Amri, Amri and Mardiyanto, Mardiyanto and Royani, Idha and Lesbani, Aldes (2022) Catalytic Oxidative Desulfurization of Dibenzothiophene Utilizing Composite Based Zn/Al Layered Double Hydroxide. Bulletin of Chemical Reaction Engineering & Catalysis, 17 (4). pp. 733-742. ISSN 1978-2993

Royani, Idha and Jorena, Jorena and Arsyad, Fitri Suryani and Koriyanti, Erry and Monado, Fiber (2021) The Characteristic Analysis of Caffeine Molecularly Imprinted Polymers Synthesized Using The Cooling-Heating Method, for Application as a Sensor Material. Science and Technology Indonesia, 6 (4). pp. 256-260. ISSN 2580-4391

EDIANTA, JAYA and Royani, Idha and Satya, Octavianus Cakra (2021) MODIFIKASI SINTESIS ION IMPRINTED POLYMERS (IIPS) DAN SISTEM INSTRUMENTASI POTENSIOMETRI: MATERIAL CERDAS SELEKTIF ADSORBSI ION METAL FE (III). Undergraduate thesis, Sriwijaya University.

Arsyad, Fitri Suryani and Royani, Idha (2021) Review of The Effectiveness of Plant Media Extracts in Barium Hexaferrite Magnets (BaFe12O19). The Characteristic Analysis of Caffeine Molecularly Imprinted Polymers Synthesized Using The Cooling-Heating Method, for Application as a Sensor Material, 6 (2). pp. 39-52. ISSN 25804391 / 2580-4405

Jorena, Jorena and Royani, Idha (2021) Analisis Proses Ekstraksi pada Nano Kafein Terhadap Konsentrasi Kafein Terbuang pada Molecularly Imprinted Polymer (MIP) dan Rongga Tercipta. Analisis Proses Ekstraksi pada Nano Kafein Terhadap Konsentrasi Kafein Terbuang pada Molecularly Imprinted Polymer (MIP) dan Rongga Tercipta, 11 (1). pp. 51-58. ISSN 20890133

Royani, Idha and Suheryanto, Suheryanto (2021) Application of nano electrode Ag/AgCl on potentiometric sensor based on molecularly imprinted polymer (MIP) to verify caffeine. Application of nano electrode Ag/AgCl on potentiometric sensor based on molecularly imprinted polymer (MIP) to verify caffeine. pp. 1-7. ISSN 1742-6596

PUTRI, SUCI CLAUDIA and Ariani, Menik and Royani, Idha and Arsali, Arsali and Monado, Fiber (2021) The calculation of uranium metallic Fuel (U-10%wtZr) cell with helium coolant using SRAC 2K6. IOP Conf. Series: Journal of Physics: Conf. Series, 2126. pp. 1-7. ISSN 1742-6588E-ISSN:1742-6596

PUTRI, SUCI CLAUDIA and Monado, Fiber and Royani, Idha (2020) STUDI PERHITUNGAN SEL BAHAN BAKAR BERBASIS URANIUM METAL (U-10%wtZr) BERPENDINGIN HELIUM MENGGUNAKAN PROGRAM SRAC (STANDARD REACTOR ANALYSIS CODE) 2K6. Undergraduate thesis, Sriwijaya University.

Ariani, Menik and Royani, Idha and Monado, Fiber (2020) DESAIN KONSEPTUAL REAKTOR CEPAT BERPENDINGIN KARBONDIOKSIDA DAN BERBAHAN BAKAR URANIUM ALAM DENGAN DAYA 2400 MW. Desain Konseptual Reaktor Cepat Berpendingin Karbondioksida dan Berbahan Bakar Uranium Alam Dengan Daya 2400 MW, 17 (2). pp. 125-130. ISSN 2514-1713

PRATAMA, ADFAN AGUS and Royani, Idha and Saleh, Khairul (2020) RANCANG BANGUN ALAT UKUR KONSENTRASI MOLECULARLY IMPRINTED POLYMER (MIP) NANO KAFEIN BERBASIS ARDUINO NANO. Undergraduate thesis, Sriwijaya University.

RAHMAYANI, JUMATUL and Royani, Idha and Jorena, Jorena (2020) PENGARUH WAKTU MILLING KAFEIN (C8H10N4O2) PADA PROSES POLIMERISASI DAN KARAKTERISTIK MOLECULARLY IMPRINTED POLYMER (MIP) NANO KAFEIN MENGGUNAKAN METODE COOLING-HEATING. Undergraduate thesis, Sriwijaya University.

Royani, Idha and Ramlan, Ramlan (2020) FEASIBILITY STUDY OF MAGNETITE EXTRACTED FROM INDONESIAN MILL SCALE THROUGH DIRECT REDUCTION PROMOTED BY GRAPHITE BASED CARBON. FEASIBILITY STUDY OF MAGNETITE EXTRACTED FROM INDONESIAN MILL SCALE THROUGH DIRECT REDUCTION PROMOTED BY GRAPHITE BASED CARBON, 55 (1). pp. 192-197. ISSN 1314-7471

Koriyanti, Erry and Saleh, Khairul and Monado, Fiber and SYAWALI, FARHAN and Royani, Idha (2020) On the Effect of Ethanol Solution on Melamine Template Removal Process. Journal of Chemical Technology and Metallurgy, 55 (1). pp. 34-39. ISSN 1314-7978

Koriyanti, Erry and Royani, Idha (2020) Optimasi Ukuran dan Jumlah Pori yang Terbentuk Pada Molacularly Imprinted Polymer (MIP) Nano Karbaril (C12H11NO2). Optimasi Ukuran dan Jumlah Pori yang Terbentuk Pada Molacularly Imprinted Polymer (MIP) Nano Karbaril (C12H11NO2), 10 (2). pp. 93-98. ISSN 2301-4970

Royani, Idha and Monado, Fiber (2020) PENGARUH MILLING TERHADAP KARAKTERISTIK MOLECULARLY IMPRINTED POLYMER KARBARIL (C12H11NO2). JOURNAL ONLINE OF PHYSICS, 5 (2). ISSN 25022016

Monado, Fiber and Royani, Idha (2020) Studi Awal Pengaruh Kloroform Sebagai Pelarut Pada Proses Ekstraksi Molecularly Imprinted Polymer (MIP) Nano Kafein. Studi awal pengaruh kloroform sebagai pelarut pada proses ekstraksi molecularly imprinted polymer (MIP) nano kafein, 10 (1). pp. 1-7. ISSN 2088-1509

Royani, Idha and Koriyanti, Erry and Jorena, Jorena and Saleh, Khairul and Monado, Fiber (2020) Temperature in the Extraction Process: The Number of Cavities Created in Polymer Based on Molecularly Imprinted Polymer (MIP) Caffeine. Temperature in the Extraction Process: The Number of Cavities Created in Polymer Based on Molecularly Imprinted Polymer (MIP) Caffeine, 860. pp. 297-302. ISSN 1662-9795

YANTO, FEBRI and Royani, Idha and Suheryanto, Suheryanto (2019) PERANCANGAN ELEKTRODA CERDAS BERBASIS SENSOR POTENSIOMETRIK UNTUK MENDETEKSI MEMBRAN MOLECULARLY IMPRINTED POLYMER (MIP) KAFEIN. Undergraduate thesis, Sriwijaya University.

ROSMANSYAH, M. RICHO and Royani, Idha and Koriyanti, Erry (2019) RANCANG BANGUN SENSOR TEGANGAN UNTUK MENDETEKSI MOLECULARLY IMPRINTED POLYMER (MIP) MELAMIN BERBASIS MIKROKONTROLER ARDUINO UNO. Undergraduate thesis, Universitas Sriwijaya.

Monado, Fiber and Ariani, Menik and Royani, Idha (2019) Comparative study of conceptual design of gas-cooled fast reactor core type tall versus pan cake based on MCANDLE-B burn up strategy. Comparative study of conceptual design of gas-cooled fast reactor core type tall versus pan cake based on MCANDLE-B burn up strategy. pp. 1-5. ISSN 1742-6596

Koriyanti, Erry and Royani, Idha (2019) Effect of template removal process with methanol solvent on cavities number of melamine molecularly imprinted polymer (MIPS). Effect of template removal process with methanol solvent on cavities number of melamine molecularly imprinted polymer (MIPS). pp. 1-5. ISSN 17426588/ 17426596

Royani, Idha and Assaidah, Assaidah (2019) The effect of atrazine concentration on galvanic cell potential based on molecularly imprinted polymers (MIPS) and aluminium as contact electrode. The effect of atrazine concentration on galvanic cell potential based on molecularly imprinted polymers (MIPS) and aluminium as contact electrode. pp. 1-5. ISSN 17426588 / 17426596

Arsyad, Fitri Suryani and Royani, Idha (2019) The effect of drying temperature on chemical composition of chitosan powder from fishbone waste to hydroponic Deep Water Culture (DWC) application. The effect of drying temperature on chemical composition of chitosan powder from fishbone waste to hydroponic Deep Water Culture (DWC) application. pp. 1-4. ISSN 17426588/ 17426596

SYAWALI, FARHAN and Royani, Idha and Koryanti, Erry (2018) PENGARUH PERLAKUAN DAN PELARUT PADA PROSES PEMBUANGAN TEMPLATE TERHADAP JUMLAH RONGGA MOLECULARLY IMPRINTED POLYMER (MIP) MELAMIN. Undergraduate thesis, Sriwijaya University.

RATNASARI, LENI and Royani, Idha and Bangun, Jorena (2018) PENGARUH WAKTU PROSES EKSTRAKSI PADA MATERIAL MOLECULARY IMPRINTED POLYMER (MIP) KARBARILTERHADAP JUMLAH RONGGA DAN GUGUS FUNGSI YANGTERBENTUK. Undergraduate thesis, Sriwijaya University.

SUSILOWATI, SUSILOWATI and Royani, Idha and Monado, Fiber (2018) PENGARUH TEMPERATUR PEMANASAN PADA PROSES POLIMERISASI TERHADAP STRUKTUR MOLEKUL SENYAWA MIP (MOLECULARLY IMPRINTED POLYMER) KARBARIL DENGAN METODE COOLING-HEATING. Undergraduate thesis, Sriwijaya University.

Koriyanti, Erry and Royani, Idha (2017) PEMBUATAN MOLECULARLY IMPRINTED POLYMER (MIP) MELAMIN MENGGUNAKAN METODE COOLING-HEATING. Pembuatan Molecularly Imprinted Polymer (MIP) melamin menggunakan metode cooling-heating, 6. pp. 45-50. ISSN 2339-0654

FETRISSA, FETRISSA and Ramlan, Ramlan and Royani, Idha (2017) PENGARUH PENAMBAHAN LINEAR LOW DENSITY POLYETHYLENE (LLDPE) PADA HIGH DENSITY POLYETHYLENE (HDPE) TERHADAP SIFAT MEKANIK UNTUK APLIKASI JERIGEN. Undergraduate thesis, Sriwijaya University.

KUSAINI, ALIP and Royani, Idha and Bangun, Jorena (2017) PENGARUH TEMPERATUR TERHADAP JUMLAH RONGGA PADA PARTIKEL MOLECULARLY IMPRINTED POLYMER (MIP) ATRAZIN. Undergraduate thesis, Sriwijaya University.

Royani, Idha (2016) Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. pp. 1-7. ISSN 17426588/ 17426596

Royani, Idha (2016) Synthesis and characterization of MAA-based molecularly-imprinted polymer (MIP) with D-glucose template. Synthesis and characterization of MAA-based molecularly imprinted polymer (MIP) with D-glucose template. pp. 1-7. ISSN 17426588/ 17426596

Royani, Idha (2014) An Atrazine Molecularly Imprinted Polymer Synthesized Using a Cooling-Heating Method with Repeated Washing: Its Physico- chemical Characteristics and Enhanced Cavities. International Journal of ELECTROCHEMICAL SCIENCE, 9. pp. 5651-5662. ISSN 1452-3981

Royani, Idha (2014) Characterization of an atrazine molecularly imprinted polymer prepared by a cooling method. Characterization of an atrazine molecularly imprinted polymer prepared by a cooling method. pp. 116-119. ISSN 0094243X, 15517616

Royani, Idha (2014) Effect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating Method. Effect of Heating Time on Atrazine-based MIP Materials Synthesized via the Cooling-heating Method, 896. ISSN 16628985

Royani, Idha (2012) Pengaruh Konsentrasi Polimer MIP (Molecularly Imprinted Polymer) Atrazin Terhadap Jumlah Ikatan yang Terbentuk. PENGARUH KONSENTRASI POLIMER MIP (MOLECULARLY IMPRINTED POLYMER) ATRAZIN TERHADAP JUMLAH IKATAN YANG TERBENTUK. pp. 77-79. ISSN 9789791954495