Items where Division is "21201-Mechanical Engineering (S1)" and Year is 2021

ABDULLAH, MUHAMMAD BAKRI and Mataram, Agung (2021) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYETHERSULFONE (PES) : KARAKTERISTIK, SIFAT MEKANIS, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

AFIF, ALDINO FAWWAZ (2021) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2807/OL/UN9/UPT.PUS.SIRK/11.2020. Sriwijaya University Library. (Submitted)

AFIF, ALDINO FAWWAZ and Arifin, Amir (2021) STUDI PEMBUATAN BODY PADA KENDARAAN MENGGUNAKAN KOMPOSIT POLIMER PENGUAT SERAT CARBON DENGAN VACUUM ASSISTED RESIN TRANSFER MOLDING. Undergraduate thesis, Sriwijaya University.

AFRIANSYAH, ARIF and Yanis, Muhammad (2021) ANALISIS KONDISI PEMESINAN PADA PROSES SIDE MILLING BAJA AISI 1045 MENGGUNAKAN RESPONSE SURFACE METHODOLOGY. Undergraduate thesis, Sriwijaya University.

AGY, MUHAMMAD FARRAS and Syofii, Imam and Setiyo, Edy (2021) PENGARUH PROSES ANNEALING TERHADAP LAJU KOROSI PADA BAJA KARBON SEDANG DILINGKUNGAN KORISIF. Undergraduate thesis, Sriwijaya University.

AKBAR, ARJUN KING (2021) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2871/OL/UN9/UPT.PUS.SIRK/11.2020. Sriwijaya University Library. (Submitted)

AKBAR, ARJUN KING and Mataram, Agung (2021) PEMBUATAN MEMBRAN POLYETHERSULFONE (PES) DENGAN PENAMBAHAN TITANIUM DIOXIDE (TiO2) TERHADAP PENGUJIAN KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

AKBAR, M RANGGA AZHADIN and Marwani, Marwani (2021) AUDIT ENERGI TERHADAP GEDUNG PENGAJARAN FAKULTAS ILMU KOMPUTER UNIVERSITAS SRIWIJAYA PALEMBANG. Undergraduate thesis, Sriwijaya University.

AKBAR, ZULTONIK and Burlian, Firmansyah and Gunawan, Gunawan (2021) ANALISIS AERODINAMIKA KENDARAAN TIPE PROTOTYPE SAMARATUNGGA EV DENGAN METODE COMPUTATIONAL FLUID DYNAMICS (CFD). Undergraduate thesis, Sriwijaya University.

ALFONSO, MUHAMMAD and Mataram, Agung (2021) PEMBENTUKAN MEMBRAN TITANIUM DIOXIDE (TiO2) DENGAN PENCAMPURAN POLYVINYLIDENE FLUORIDE (PVDF) : KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

AMAL, MUHAMMAD GIFARI ICHLASUL and Barlin, Barlin (2021) ANALISIS KETIDAKPASTIAN (UNCERTAINTY) PENGUKURAN KEKERASAN MATERIAL MENGGUNAKAN MIKROSKOP OLYMPUS SZ61 DAN STM6-LM. Undergraduate thesis, Sriwijaya University.

AN-NAJIY, AHMAD MUJADDID (2021) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2801/OL/UN9/UPT.PUS.SIRK/11.2020. Sriwijaya University Library. (Submitted)

ANUGRAH, SATRIA and Mataram, Agung (2021) KARAKTERISTIK MEMBRAN POLYETHERSULFONE (PES) DENGAN PENAMBAHAN TITANIUM DIOXIDE (TiO2) TERHADAP PENGUJIAN TARIK,STRUKTUR MIKRO, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

APRIYAN, DIAN and Bizzy, Irwin (2021) KAJI EKSPERIMENTAL KOTAK PENDINGIN MINI MENGGUNAKAN THERMOELECTRIC COOLER (TEC) DENGAN MEDIA PENDINGIN AIR DAN UDARA. Undergraduate thesis, Sriwijaya University.

ARBINTA, BIMA and Alian, Helmy (2021) PENGARUH WAKTU TAHAN PROSES NORMALISASI PADA BAJA AISI 4140 TERHADAP KEKUATAN TARIK, KEKUATAN IMPAK DAN STRUKTUR MIKRO. Undergraduate thesis, Sriwijaya University.

ARIS, MUHAMMAD and Mohruni, Amrifan Saladin (2021) APPLICATION PROGRAMMING INTERFACE DALAM SISTEM INFORMASI MANAJEMEN DI BIDANG MANUFAKTUR YANG DI APLIKASIKAN PADA E - LEARNING UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

ARNEF, SUCI MUTHIA RAMADHANI and Yani, Irsyadi (2021) DESAIN SISTEM IDENTIFIKASI KUALITAS TELUR AYAM RAS BERBASIS SENSOR FOTODIODA. Undergraduate thesis, Sriwijaya University.

ARYADI, PANJI JANATAMA and Abidin, Zainal (2021) ANALISIS STRUKTUR SEPEDA LIPAT IZI ARC 16 DENGAN MENGGUNAKAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijaya University.

ASTRADA, YOGA MARTINO and Basri, Hasan (2021) ANALISIS LAJU ALIRAN FLUIDA PADA SKAFOLD JENIS FUNCTIONAL DEGRADED STRUCTURE (FDS) TERHADAP NILAI PERMEABILITAS DAN TEGANGAN GESER. Undergraduate thesis, Sriwijaya University.

AZIS, YAYANG PRANANDA ABDUL and Mataram, Agung (2021) PEMBUATAN MEMBRAN POLIVINYLIDENE FLUORIDE (PVDF) DENGAN PENCAMPURAN PERAK NITRAT (AgNO3) TERHADAP PENGUJIAN KARAKTERISTIK, SIFAT MEKANIS DAN PERMEABILITAS. Undergraduate thesis, Universitas Sriwijaya.

Arifin, Amir (2021) Bukti Korespondensi_INTERGRANULAR CORROSION AND DUCTILE-BRITTLE TRANSITION BEHAVIOUR IN MARTENSITIC STAINLESS STEEL. Asosiasi Peneliti Sriwijaya.

Arifin, Amir and Gunawan, Gunawan (2021) Characterization Porous HA/SiO2 Composite Prepared Using Natural Space Holder. Lecture Notes in Mechanical Engineering. ISSN 2195-4356

Arifin, Amir and Gunawan, Gunawan (2021) Flow Rate Effects on Microstructure and Mechanical Properties for Titanium Weld Joint. Journal of Energy, Mechanical, Material, and Manufacturing Engineering, 6. pp. 189-196. ISSN 2541-6332

Arifin, Amir and Gunawan, Gunawan (2021) INTERGRANULAR CORROSION AND DUCTILE-BRITTLE TRANSITION BEHAVIOUR IN MARTENSITIC STAINLESS STEEL. Indonesian Journal of Engineering and Science, 2 (3). ISSN 2774-373X

Arifin, Amir and Gunawan, Gunawan and Barlin, Barlin (2021) Fabrication of Titanium-Matrix Composite with 40 wt% Hydroxyapatite by Powder Injection Molding. Lecture Notes in Mechanical Engineering. ISSN 2195-4364

Arifin, Amir and Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Dwi, Purba and Gunawan, Gunawan (2021) Effect of fly ash as reinforcement on mechanical properties of aluminum scrap based hybrid composite (Similarity). Turnitin Universitas Sriwijaya, Selangor, Malaysia. (Submitted)

BAGUS PRATAMA, RIZKY and Bayyin, Darmawi (2021) PENGUJIAN SUDU TURBIN JENIS BARU DENGAN SUDUT GAMMA 10° DENGAN VARIABEL JUMLAH SUDU UNTUK MELIHAT EFEKTIFITAS PENYERAPAN DAYA PADA DIAMETER RODA KINCIR AIR 0,8 M. Undergraduate thesis, Sriwijaya University.

Barlin, Barlin (2021) Korespondensi Artikel BO001. Fakultas Teknik, Sultan Ageng Tirtayasa.

Barlin, Barlin (2021) Korespondensi Fabrication of Titanium-Matrix Composite. Springer Singapore. (Unpublished)

Barlin, Barlin (2021) Korespondensi_Chassis frame design and analysis based on formula SAE Japan. Asosiasi Peneliti Sriwijaya.

Barlin, Barlin (2021) Korespondensi_Fabrication of Titanium-Matrix Composite with 40 wt% Hydroxyapatite by Powder Injection Molding. Springer Nature Singapore.

Barlin, Barlin (2021) Korespondensi_The effect of blade curvature angle of savonius wind turbine on the performance. Fakultas Teknik Universitas Sriwijaya.

Bizzy, Irwin and Sipahutar, Riman and Darmawi, Darmawi and Yanis, Muhammad and Sofijan, Armin (2021) PENERAPAN LISTRIK DESA SECARA ON-GRID PLN DALAM UPAYA PENGHEMATAN BIAYA LISTRIK (Similarity). Fakultas Teknik Universitas Sriwijaya.

Bizzy, Irwin and Sipahutar, Riman and Ibrahim, Eddy and Faizal, Muhammad (2021) Determining of Drying Characteristics for South Sumatera Low Rank Coal using Solar and Laboratory Scaled Oven (Similarity). Turnitin Universitas Sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Tribun Sumsel Palembang.

DHIA'ULHAQ, MUHAMMAD and Burlian, Firmansyah and Gunawan, Gunawan (2021) ANALISIS AERODINAMIKA KENDARAAN TIPE URBAN SRIWIJAYA ECO DENGAN METODE COMPUTATIONAL FLUID DYNAMICS (CFD). Undergraduate thesis, Sriwijaya University.

Darmawi, Darmawi (2021) Analysis of Liquid Smoke Production Process from Palm Shell With Integrated Pyrolysys Method. Natural Volatiles & Essentials Oils, 8 (4). pp. 1143-1151. ISSN e-ISSN 2148-9637

Darmawi, Darmawi (2021) The Effective Pitch Of Scoop Blade Operating on Undershot Waterwheel With Water Current of 0.8 m/sec – 2.26 m/sec. Sriwijaya International Conference on Engineering and Technology (SICETO. ISSN -

Darmawi, Darmawi and Hadi, Qomarul and Ellyanie, Ellyanie and Bizzy, Irwin (2021) ANALISIS ALIRAN UDARA ALAT PENGHEMAT ENERGI VERTIKAL GENERASI KEDUA UNTUK MASYARAKAT TEBING GERINTING KECAMATAN INDRALAYA SELATAN KABUPATEN OGAN ILIR (Similarity ithenticate). Jurusan Teknik Mesin Fakultas Teknik Universitas Sriwijaya.

Darmawi, Darmawi (2021) Penilaian dari Bpk Kuncoro dan Bpk Agustinus untuk ANALISIS ALIRAN UDARA ALAT PENGHEMAT ENERGI VRTIKAL GENERASI KEDUA... Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi and Hadi, Qomarul and Ellyanie, Ellyanie and Bizzy, Irwin (2021) ANALISIS ALIRAN UDARA ALAT PENGHEMAT ENERGI VERTIKAL GENERASI KEDUA UNTUK MASYARAKAT TEBING GERINTING KECAMATAN INDRALAYA SELATAN KABUPATEN OGAN ILIR. Jurnal Rekayasa Mesin, 21 (2). pp. 75-78. ISSN 1411 - 6553

F, AHMAD KHAIRUL and Ellyanie, Ellyanie (2021) PENGARUH CAMPURAN BAHAN BAKAR PERTALITE-ETANOL TERHADAP EMISI GAS BUANG SEPEDA MOTOR DENGAN CATALYTIC CONVERTER. Undergraduate thesis, Sriwijaya University.

FAHZY, MUHAMMAD CHRISSANDY and Sahim, Kaprawi (2021) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK CIRCULAR. Undergraduate thesis, Sriwijaya University.

FARABI, IQBAL AL and Yanis, Muhammad and Saputra, M. A Ade (2021) PENGEMBANGAN SISTEM PENGUKURAN GETARAN PEMESINAN DENGAN 3DR RADIO TELEMETRY BESERTA IMPLEMENTASI APLIKASI JAVA SEBAGAI DATA LOGGER DAN ANALISIS SPEKTRAL (OPEN-SOURCE). Undergraduate thesis, Sriwijaya University.

FARHAN, MUHAMMAD and Pratiwi, Diah Kusuma (2021) ANALISA PENGELASAN DISSIMILAR BAJA KARBON TINGGI DAN BAJA KARBON RENDAH MENGGUNAKAN SHIELDED METAL ARC WELDING DAN POST WELD HEAT TREATMENT. Undergraduate thesis, Sriwijaya University.

Fajri Vidian, Fajri (2021) Corespondence Author of CYCLE-TEMPO SIMULATION OF ULTRA-MICRO GAS TURBINE FUELED BY PRODUCER GAS RESULTING FROM LEAF WASTE GASIFICATION. A. Pidhornyi Institute for Mechanical Engineering Problems National Academy of Science of Ukraine. (Submitted)

Fajri Vidian, Fajri (2021) Corespondence Author of PERFORMANCE SMALL SPARK IGNITION ENGINE USING PRODUCER GAS FROM COAL GASIFICATION DUAL FUEL OPERATION. Science Press. (Submitted)

Fajri Vidian, Fajri (2021) Corespondence Author of Steam Power Plant Simulation Using Cycle Tempo Investigation of Generator Power. Quest Journals. (Submitted)

HAFIZ, RM and Gunawan, Gunawan (2021) ANALISIS TEGANGAN SISA PADA PENGELASAN MATERIAL PRESSURE VESSEL SA-516 Gr.70 DENGAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijaya University.

HANGGORO, TRI and Yani, Irsyadi (2021) KARAKTERISTIK MOTOR BLDC 350WATT DENGAN MENGGUNAKAN CONTROLLER KUSTOM PADA KENDARAAN PROTOTYPE LISTRIK SAMARATUNGGA EV. Undergraduate thesis, Sriwijaya University.

HISJAM, MACHRUS and Pratiwi, Diah Kusuma (2021) VARIASI WAKTU PELAPISAN ELEKTROPLATING MENGGUNAKAN NIKEL PADA BAJA KARBON RENDAH SS400. Undergraduate thesis, Sriwijaya University.

HUTABARAT, ABRAHAM PARTOGI and Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2021) ANALISIS KERUSAKAN PADA BUSHING APRON FEEDER. Undergraduate thesis, Sriwijaya University.

INDOBA, SATRIAMANDALA and Abidin, Zainal (2021) ANALISIS STRUKTUR SEPEDA GUNUNG HARDTAIL PACIFIC TRACTOR DHX 3.0 DENGAN MENGGUNAKAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijaya University.

ISMAIL, MALIKUSSHWARI and Yani, Irsyadi (2021) IMPLEMENTASI LENGAN MEKANIS 2-DOF PADA SISTEM SORTIR BERBASIS RASPBERRY PI. Undergraduate thesis, Sriwijaya University.

ISTI, NOVIALITA and Arifin, Amir (2021) ANALISIS SAMBUNGAN LAS TAK SEJENIS SMAW TERHADAP BAJA KARBON 4340 DAN ST 36 DENGAN MENGGUNAKAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

JAGAD, MUHAMMAD SURYA NETRANE and Utami, Nurhabibah Paramitha Eka (2021) ANALISIS KERUSAKAN PADA CHAIN LINK APRON FEEDER. Undergraduate thesis, Sriwijaya University.

KASYFURRAHMAN, MUHAMMAD and ARIFIN, Amir (2021) ANALISA PARAMETER PROSES UNTUK SAMBUNGAN DISSIMILAR BAJA KARBON RENDAH DAN STAINLESS STEEL DENGAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

KEMAL, MOCHAMAD and Bizzy, Irwin (2021) KAJI EKSPERIMENTAL KONVERSI ENERGI MATAHARI MENJADI ENERGI LISTRIK DENGAN PANEL PV TIPE POLYCRYSTALLINE 100WP. Undergraduate thesis, Sriwijaya University.

KIRAM, ARIF FAUZUL and Nukman, Nukman (2021) PENGARUH PENAMBAHAN TIMAH HITAM MURNI TERHADAP ENERGI AKTIVASI DAN OKSIDASI PADA CORAN ALUMINIUM MURNI. Undergraduate thesis, Sriwijaya University.

KURNIAWAN, FERDY and Vidian, Fajri (2021) SIMULASI GASIFIKASI BATUBARA SUMATERA SELATAN MENGGUNAKAN CYCLE TEMPO. Undergraduate thesis, Sriwijaya University.

KURNIAWAN, MUHAMMAD BAYU and Bizzy, Irwin (2021) ANALISIS POTENSI BIOGAS DARI KOTORAN SAPI UNTUK MENGHASILKAN LISTRIK DI SCIENCE TECHNO PARK PROVINSI SUMATERA SELATAN. Undergraduate thesis, Sriwijaya University.

MULYA, ARIEF and Alian, Helmy (2021) PENGARUH PROSES ANNEALING DAN NORMALIZING TERHADAP KEKUATAN TARIK, KEKERASAN, STRUKTUR MIKRO BAJA ASSAB 709. Undergraduate thesis, Sriwijaya University.

MUSLIMIN, M. MUCHLIS and Yani, Irsyadi (2021) PERANCANGAN DAN SIMULASI RANGKA KENDARAAN PROTOTYPE LISTRIK SAMARATUNGGA DENGAN MENGGUNAKAN BAHAN MATERIAL CARBON FIBER. Undergraduate thesis, Sriwijaya University.

NAINGGOLAN, KRISTIAN and Yani, Irsyadi (2021) PERANCANGAN SISTEM PENGEREMAN HYDRAULIC DISK BRAKE KENDARAAN PROTOTYPE BENSIN BERDASARKAN REGULASI SHELL ECO MARATHON (SEM). Undergraduate thesis, Sriwijaya University.

NAPITUPULU, WANDI PAGAR ASI and Puspitasari, Dewi (2021) ANALISA PENGARUH ANGLE OF ATTACK TERHADAP GAYA LIFT DAN GAYA DRAG PADA AIRFOIL NACA 0012 DENGAN MACH 0,70 MENGGUNAKAN PROGRAM CFD. Undergraduate thesis, Sriwijaya University.

NASRULLAH, MUHAMMAD and Gunawan, Gunawan (2021) ANALISIS TEGANGAN SISA PADA PENGELASAN MATERIAL PIPA API 5L Gr B DENGAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijaya University.

NEHEMIA, DARWIN and Abidin, Zainal (2021) ANALISIS DISTRIBUSI TEGANGAN REGANGAN DAN PERPINDAHAN PADA SISTEM PERPIPAAN PEMBANGKIT LISTRIK TENAGA GAS DAN UAP. Undergraduate thesis, Sriwijaya University.

NUGRAHA, BIMA SATRIA and Mohruni, Amrifan Saladin and BUDIMAN, ARIE YUDHA (2021) PENGARUH KECEPATAN POTONG, KEDALAMAN POTONG RADIAL DAN AXIAL TERHADAP KEKASARAN PERMUKAAN PADA PROSES FRAIS KRIOGENIK. Undergraduate thesis, Sriwijaya University.

NUGRAHA, M. REZA and Utami, Nurhabibah Paramitha Eka (2021) PENGARUH PRE-HEAT PADA PENGELASAN DISSIMILAR ANTARA BAJA KARBON RENDAH DAN TINGGI MENGGUNAKAN LAS SMAW. Undergraduate thesis, Sriwijaya University.

OCTAPIA, ANI and Gunawan, Gunawan (2021) STUDI PENGARUH TEMPERATUR KOMPAKSI PADA PEMBUATAN KERAMIK HIDROKSIAPATIT MELALUI PROSES SINTERING DINGIN. Undergraduate thesis, Sriwijaya University.

PAMUNGKAS, DIMAS PRAYOGA and Zulkarnain, Zulkarnain (2021) RANCANG BANGUN MOBILE ROBOT PENDETEKSI SUHU DAN KELEMBABAN DENGAN PENGENDALI GERAK MENGGUNAKAN BLUETOOTH. Undergraduate thesis, Universitas Sriwijaya.

PANGESTU, AJI PRAYOGO and Ellyanie, Ellyanie (2021) PENGARUH CAMPURAN BAHAN BAKAR PERTALITE-ETANOL TERHADAP PERFORMANSI SEPEDA MOTOR DENGAN CATALYTIC CONVERTER. Undergraduate thesis, Sriwijaya University.

PANGESTU, ALDO and Nukman, Nukman (2021) PENGARUH VARIASI BERAT PENAMBAHAN BATUBARA 60 MESH PADA ALUMINIUM COR TERHADAP KEKUATAN LELAH. Undergraduate thesis, Sriwijaya University.

PARDEDE, YONAS PASKAH and Sahim, Kaprawi (2021) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK ELLIPTICAL. Undergraduate thesis, Sriwijaya University.

PARMAR, RUPINDER SINGH (2021) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2802/OL/UN9/UPT.PUS.SIRK/11.2020. Sriwijaya University Library. (Submitted)

PERNANDA, ARIF YUDHA and Gunawan, Gunawan (2021) KARAKTERISASI PENYAMBUNGAN STAINLESS STEEL AUSTENITIC TYPE 304 DAN HSLA AISI 4340 DENGAN MENGGUNAKAN METODE ROTARY FRICTION WELDING. Undergraduate thesis, Sriwajaya University.

PRADANA, ADITYA HERLIN and Basri, Hasan (2021) SIMULASI DISTRIBUSI TEMPERATUR KOMPONEN NOSEL EKSTRUDER FILAMEN PLA DAN EKSPERIMENTAL PENGARUH TEMPERATUR PEMANAS PADA HASIL FILAMEN. Undergraduate thesis, Sriwijaya University.

PRAMONO, DWI and Firmansyah Burlian, Firmansyah (2021) PERTAMAX DAN PERTALITE PADA KINERJA MESIN SEPEDA MOTOR YAMAHA 3SO VEGA R 110CC TAHUN 2007. Undergraduate thesis, Sriwijaya University.

PRASETIA, KELVIN ANUGRAH and Mataram, Agung (2021) KARAKTERISTIK MEMBRAN POLYVINYLIDENE FLUORIDE (PVDF) DENGAN PENAMBAHAN TITANIUM DIOXIDE (TiO2) TERHADAP PENGUJIAN TARIK, STRUKTUR MIKRO DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

PRATAMA, ANDIKA AKBAR and Arifin, Amir (2021) OPTIMASI SAMBUNGAN LAS TAK SEJENIS SMAW BAJA KARBON 4340 DAN STAINLESS STEEL 304 DENGAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

PRATAMA, M DANDY PUTRA and Hadi, Qomarul (2021) PENGARUH TEMPERATUR SINTERING TERHADAP DENSITAS DAN KEKUATAN TEKAN CMC BERMATRIK KALSIUM KARBONAT BERPENGUAT FLY ASH. Undergraduate thesis, Sriwijaya University.

PRATAMA, MUHAMMAD DJOAN and Yani, Irsyadi (2021) DESAIN SISTEM IDENTIFIKASI UKURAN TELUR AYAM RAS BERBASIS SENSOR INFRARED. Undergraduate thesis, Sriwijaya University.

PRATAMA, RICKY WAHYU and Yanis, Muhammad (2021) DESAIN DAN MANUFACTURING MESIN BENDING DAN NOTCHING. Undergraduate thesis, Sriwijaya University.

PUTRA, EGO SYAH and Arifin, Amir (2021) PENGARUH KECEPATAN PUTARAN DAN POST WELD HEAT TREATMENT TERHADAP KEKUATAN SAMBUNGAN LAS PADA ROTARY FRICTION WELDING. Undergraduate thesis, Sriwijaya University.

PUTRA, RONNY EGETHA and Kadir, M. Zahri (2021) ANALISIS PERFORMANSI TURBIN HIDRO PICO PIPA AIR TERHADAP PERUBAHAN DEBIT AIR. Undergraduate thesis, Sriwijaya University.

Pratiwi, Diah Kusuma (2021) Similarity_ANALISIS KERUSAKAN PADA BUSHING APRON FEEDER. JUrusan Teknik Mesin FT Unsri, Jurnal Rekaya Mesin.

Pratiwi, Diah Kusuma (2021) Similarity_WEAR ANALYSIS OF VERTICAL COAL MILL PLATE. Turnitin Universitas Sriwijaya, Indonesian Journal of Engineering and Science.

Pratiwi, Diah Kusuma (2021) Similarity_WELDING ANALYSIS OF GRAY CAST IRON ASTM A48 CLASS 40 USING SMAW. Turnitin Universitas Sriwijaya, IJES.

RAJASAHAWANDA, MOHAMMAD YULIANTO and Yanis, Muhammad (2021) PENGATURAN KAPASITAS CAIRAN PEMOTONGAN PEMESINAN PADA ALAT MINIMUM QUANTITY LUBRICATION (MQL) DAN PENGUJIANNYA PADA PROSES FREIS. Undergraduate thesis, Sriwijaya University.

RAMADHAN, I PUTU AHMAD WALMANDA R and Mohruni, Amrifan Saladin (2021) ANALISIS PREDIKSI TERHADAP KEKASARAN PERMUKAAN PADA PROSES PEMBUBUTAN MENGGUNAKAN METODE ANN (ARTIFICIAL NEURAL NETWORK). Undergraduate thesis, Sriwijaya Univesity.

RAMADHAN, MUHAMMAD IZAAZ and Alian, Helmy (2021) PENGARUH WAKTU TAHAN PADA PROSES ANNEALING BAJA ASSAB 709M TERHADAP SIFAT MEKANIKNYA. Undergraduate thesis, Sriwijaya University.

RAMLI, RAMLI and Yani, Irsyadi (2021) PEMODELAN METODE ELEMEN HINGGA PENGELASAN GESEK ROTASI PADA PENYAMBUNGAN MATERIAL DISSIMILAR. Undergraduate thesis, Sriwijaya University.

RIANTO, SEPTIAN ANDRI and Arifin, Amir (2021) ANALISIS MIKROSTRUKTUR DAN SIFAT MEKANIS PADA ROTARY FRICTION WELDING STAINLESS STEEL TYPE AUSTENITIC 304 DAN ASTM A36. Undergraduate thesis, Sriwijaya University.

RIZKY, MUHAMMAD and Abidin, Zainal (2021) ANALISIS DISTRIBUSI TEGANGAN, REGANGAN, DAN PERPINDAHAN PADA SISTEM PEMIPAAN HRH STEAM OUTLET DRAIN MENGGUNAKAN SOFTWARE CEASAR II. Undergraduate thesis, Sriwijaya University.

SENTRA HKI UNIVERSITAS SRIWIJAYA (2021) SISTEM PENYORTIRAN LIMBAH LOGAM SECARA OTOMATIS MENGGUNAKAN SENSOR WARNA CITRA DAN SENSOR PENGATUR CAHAYA SECARA REAL TIME. IDP000079803.

SAPUTRA, DERA and Mohruni, Amrifan Saladin (2021) PERANCANGAN RIG PADA PROSES ALIRAN CRYOGENIC MENGGUNAKAN BAJA RINGAN. Undergraduate thesis, Sriwijaya Univesity.

SATRIA, MUHAMMAD and Irsyadi, Yani (2021) DESAIN DAN PENGEMBANGAN LENGAN ROBOT 3-DOF PENYORTIR BENDA BERDASARKAN JENIS WARNA BERBASIS MIKROKONTROLLER. Undergraduate thesis, Sriwijaya University.

SINAGA, MUHAMMAD SOFYAN and Basri, Hasan (2021) STUDI PENGARUH PENIRUAN MORFOLOGI TULANG KANSELUS UNTUK SKAFOLD JENIS STRUKTUR TERDEGRADASI TAKFUNGSIONAL BERBAHAN BESI MURNI TERHADAP KARAKTERISTIK ALIRAN FLUIDA. Undergraduate thesis, Sriwijaya University.

SUHADA, REZA ANDRE and Pratiwi, Diah Kusuma (2021) ANALISA PENGELASAN BESI COR KELABU ASTM A48 CLASS 40 MENGGUNAKAN SMAW. Undergraduate thesis, Sriwijaya University.

SULAIMAN, FATHURRAHMAN and Basri, Hasan (2021) PROSES PERANCANGAN MESIN EKSTRUSI FILAMEN 3D PRINTER TIPE FUSED DEPOSITION MODELING (FDM) BERBASIS MATRIAL BIOKOMPOSIT PLA-MAGNESIUM. Undergraduate thesis, Sriwijaya University.

SUMADI, AHMAD (2021) SURAT KETERANGAN BEBAS PUSTAKA Nomor:2873/OL/UN9/UPT.PUS.SIRK/11.2020. Sriwijaya University Library. (Submitted)

SUMADI, AHMAD and Qomarul, Hadi (2021) ANALISA SIFAT MEKANIK PADA KOMPOSIT 86Al 1020 - 12Fly Ash - 2Mg YANG DIBUAT DENGAN PROSES DIRECT MELT OXIDATION (DIMOX). Undergraduate thesis, Universitas Sriwijaya.

SUMARNA, HERLIN and Sipahutar, Riman and Bizzy, Irwin (2021) THE EFFECT OF PROCESS PARAMETERS ON LIQUID SMOKE PRODUCTION FROM PALM OIL PYROLYSIS. MEDIA BINA ILMIAH, 15 (10). pp. 5451-5456. ISSN 1978-3787 (print) 2615-3505 (online)

Sipahutar, Riman and Bizzy, Irwin and Darmawi, Darmawi and Faizal, Muhammad and Hidayati, Baiti (2021) Analysis of Liquid Smoke Production Process From Palm Shell With Integrated Pyrolysis Method. NVEO – NATURAL VOLATILES & ESSENTIAL OILS, 8 (4). 1143-1151 [32] B. Withman and B. Johnson, Refrigeration and Air Conditioning Technology, 6 th. Delmar, 2009. [33] H. Rostamza. ISSN 2148-9637

TAIHITU, AHMAD ADDINA and Abidin, Zainal (2021) ANALISIS DISTRIBUSI TEGANGAN REGANGAN DAN PERPINDAHAN KONSTRUKSI MENARA TANGKI AIR 1000 LITER DENGAN MENGGUNAKAN METODE ELEMEN HINGGA. Undergraduate thesis, Sriwijaya University.

TRYCAHYONO, GANANG and Gunawan, Gunawan (2021) STUDI PENGARUH TEKANAN KOMPAKSI PADA PEMBUATAN KERAMIK HIDROKSIAPATIT MELALUI PROSES SINTERING DINGIN. Undergraduate thesis, Sriwijaya University.

UTAMA, VERNANDA SATIA and Yanis, Muhammad (2021) PENELITIAN DAN PEMBUATAN IMPULSE HAMMER DENGAN VARIASI HEAD MASS UNTUK MENINGKATKAN SENSITIVITAS PEMBACAAN MODUS GETAR. Undergraduate thesis, Sriwijaya University.

Vidian, Fajri (2021) Clarification of Corespondence Author of PERFORMANCE SMALL SPARK IGNITION ENGINE USING PRODUCER GAS FROM COAL GASIFICATION:DUAL FUEL OPERATION. Science Press. (Submitted)

WIJAYA, PANJI SATRIA and Puspitasari, Dewi (2021) STUDI EKSPERIMENTAL REGIME ALIRAN DENGAN MENGGUNAKAN PIPA PLEXYGLASS. Undergraduate thesis, Sriwijaya University.

WINATA, JUAN and Yani, Irsyadi (2021) DESAIN SISTEM EJEKTOR JENIS PNEUMATIK BERBASIS RAINBOT RGB REV2. Undergraduate thesis, Sriwijaya University.

WIRANATA, ARBI and Astuti, Astuti (2021) ANALISIS KOEFISIEN KONVEKSI PADA ALIRAN NANOFLUIDA DENGAN PARTIKEL CuO FRAKSI VOLUME 0,1 %, 0,3 % DAN 0,5 %. Undergraduate thesis, Sriwijaya University.

YUDA, MUHAMMAD BAGAS SATRIA and Arifin, Amir (2021) FABRIKASI TUBE KOMPOSIT EPOKSI BERPENGUAT SERAT KARBON. Undergraduate thesis, Universitas Sriwijaya.

YUSRAN, FARIZ and Pratiwi, Diah Kusuma (2021) ANALISA DISSIMILAR WELDING BAJA KARBON RENDAH DAN BAJA KARBON TINGGI MENGGUNAKAN SMAW DENGAN ELEKTRODA E7018 ARUS I=100A PADA KONDISI AS WELD. Undergraduate thesis, Sriwijaya University.

Yani, Irsyadi (2021) KEPUTUSAN REKTOR UNIVERSITAS SRIWIJAYA NOMOR 0194/UN9/SK.BUK.KP/2021 TENTANG PENGANGKATAN KEMBALI KETUA DAN SEKRETARIS JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA MASA JABATAN TAHUN 2021--2025. Prodi S1-Teknik Mesin.

Yanis, Muhammad and Gunawan, Gunawan and Pratama, Ricky Wahyu (2021) Perancangan dan Pembuatan Mesin Bending dan Notching. Jurnal Rekayasa Mesin, 21 (1). pp. 33-38. ISSN 1411-6553