Items where Division is "21201-Mechanical Engineering (S1)" and Year is 2022

ABYAN, HANIF MUHAMMAD and Santoso, Dyos and Yanto, Joni (2022) ANALISIS EKSERGI PADA PENINGKATAN PERFORMANSI PLTP LUMUT BALAI DENGAN SIKLUS KOMBINASI SINGLE FLASH-BINARY. Undergraduate thesis, Sriwijaya University.

AKBAR, AMRUL and Arifin, Amir (2022) ANALISIS KEKUATAN SAMBUNGAN LAS SMAW (SHIELDED METAL ARC WELDING) BAJA KARBON RENDAH DENGN VARIASI ARUS YANG BERBEDA. Undergraduate thesis, Sriwijaya University.

AKBAR, AZHARI and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN MENGGUNAKAN MESIN MILLING PADA MATERIAL BAJA KARBON TINGGI AISI D2 DINDING TIPIS PADA KONDISI KRIOGENIK. Undergraduate thesis, Sriwijaya University.

AL-FAJRI, RACHMADI ZAKI and Puspitasari, Dewi (2022) PROSES PEMISAHAN FASE LIQUID-LIQUID DENGAN METODE INNAGE PADA TANGKI-03 DI KSO PERTAMINA EP-ENERGI TANJUNG TIGA PRABUMULIH. Undergraduate thesis, Sriwijaya University.

ALBAJILI, FARISAN KASYFI and Gunawan, Gunawan (2022) PENGEMBANGAN KERAMIK HIDROKSIAPATIT TERDOPING TEMBAGA 1, 1.5, DAN 2 MOL PADA SINTERING 1000℃, 1100℃, DAN 1200℃. Undergraduate thesis, Sriwijaya Univversity.

ALDI, AL FURQAN and Utami, Nurhabibah Paramitha Eka (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP MELALUI PERBEDAAN DIMENSI CETAKAN PASIR SEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

ALDI, RAHMAD and Vidian, Fajri (2022) ANALISIS ENERGI PROSES GASIFIKASI BIOMASSA. Undergraduate thesis, Sriwijaya University.

ALDIKA, ALDIKA and Nukman, Nukman (2022) PENGARUH PENAMBAHAN TIMAH PUTIH MURNI PADA CORAN ALUMINIUM MURNI TERHADAP ENERGI AKTIVASI DAN OKSIDASI. Undergraduate thesis, Sriwijaya University.

ALDIYANTO, BIMANTORO and Gunawan, Gunawan (2022) PENGARUH PERLAKUAN PANAS PADA PENGELASAN BAJA A36 TERHADAP KEKERASAN DAN KOROSI. Undergraduate thesis, Sriwijaya University.

ALFAJRI, IMAM and Santoso, Dyos and Yanto, Joni (2022) STUDI PERFORMANSI PLTP LUMUT BALAI PADA KONDISI OFF-DESIGN MENGGUNAKAN ANALISIS EKSERGI. Undergraduate thesis, Sriwijaya University.

ALFALAH, UNGGUL and Yanis, Muhammad and Budiman, Arie Yudh (2022) ANALISIS KEKASARAN PERMUKAAN DENGAN RESPONSE SURFACE METHODOLOGY PADA KONDISI PEMESINAN MENGGUNAKAN NANOFLUID AL2O3 DALAM SISTEM MINIMUM QUANTITY LUBRICATION. Undergraduate thesis, Sriwijaya University.

ALFARISY, MUHAMMAD and Mohruni, Amrifan Saladin (2022) PEMBUATAN DETAILED ENGINEERING DESIGN ROLLER DARI MILLING STATION DI PT. CINTA MANIS. Undergraduate thesis, Sriwijaya University.

ALMAHESA, M. ANDRI ADITYA and Chandra, Hendri (2022) ANALISIS DISTRIBUSI TEGANGAN,REGANGAN DAN PERPINDAHAN PADA TANKI ATAP KERUCUT MENGGUNAKAN PERANGKAT LUNAK SOLIDWORKS 2020. Undergraduate thesis, Sriwijaya University.

ALRAKAZ, HADI and Arifin, Amir (2022) STUDI PENGARUH JENIS FLUIDA PADA PEMBUATAN KERAMIK HIDROKSIAPATIT MELALUI PROSES SINTERING DINGIN. Undergraduate thesis, Sriwijaya University.

ARIFIN, STEVEN DAVIN and Basri, Hasan (2022) INVESTIGASI SISTEM PEMANAS DAN PENDINGIN PADA MESIN EKSTRUDER TERHADAP KUALITAS FILAMEN POLYLACTIC ACID (PLA ). Undergraduate thesis, Sriwijaya University.

ARYANTO, DESTU and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYETHERSULFONE (PES) DENGAN PENCAMPURAN TIMAH DIOKSIDA (SnO2): KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ATMAJA, WIRANDA SATRIA and Vidian, Fajri (2022) ANALISIS PEMBANGKIT TENAGA UAP BERBAHAN BAKAR GAS HASIL GASIFIKASI BATU BARA MENGGUNAKAN CYCLE TEMPO. Undergraduate thesis, Sriwijaya University.

AWALDI, KURNIAWAN and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYVINYLIDENE FLUORIDE(PVDF) DENGAN PENCAMPURAN TIN(IV) DIOXIDE(SnO2) : KARAKTERISTIK, SIFAT MEKANIS, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

Arifin, Amir (2022) Investigation of Effect Garbage Level in Filtration System to Headloss and Water Discharge by Computational Method. CFD Letters, 14 (12).

Arifin, Amir (2022) Reviewer_THERMAL AND FLOW ANALYSIS OF STAINLESS STEEL AND ALUMINA_Journal of Mechanical Engineering_Q3, Universiti Teknologi Mara (Malaysia). Universiti Teknologi Mara.

Arifin, Amir (2022) SK Promotor_No 00983/UN9.FT/TU.SK/2022_Mahasiswa S3_Aria Wira Yuda_FT UNSRI. FT UNSRI.

Arifin, Amir and Gunawan, Gunawan (2022) Improvement Incoloy Alloy 800 Weldability After 10 Years of Service through Solution Annealing and Normalizing Method. Journal of Engineering Research. ISSN 2307-1885

Arifin, Amir and Gunawan, Gunawan (2022) Taguchi Approach of Dissimilar Welds for AISI 4340 Steel and 304 Austenitic Stainless Steel. Journal of Mechanical Engineering, 19 (3). pp. 189-203. ISSN 2550-164X

Arifin, Amir and Gunawan, Gunawan and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Porous titanium alloy/hydroxyapatite composite using powder compaction route. Turnitin Universitas Sriwiajaya. (Submitted)

BAHI, MOHD RADEN and Sahim, Kaprawi (2022) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK SEGITIGA. Undergraduate thesis, Sriwijaya University.

BUTAR BUTAR, POLADO POWER and Chandra, Hendri (2022) KETAHANAN LELAH BESI COR NODULAR DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

Barlin, Barlin (2022) Korespondensi Investigation of Effect Garbage Leve. Fakultas Teknik Universitas Sriwijaya.

Barlin, Barlin (2022) Korespondensi_BO0011. Research Center of Inorganic Materials and Coordination Complexes, FMIPA Universitas Sriwijaya.

Bizzy, Irwin (2022) INCREASED PRODUCTIVITY OF LIQUID SMOKE THROUGH FAST THAWING WITH REFRIGERATION SYSTEMS AT LOW AIR TEMPERATURES... (similarity). Institut za Istrazivanja I Projektovanja u Privredi..

Bizzy, Irwin (2022) MODUL TERMOELEKTRIK TEORI & APLIKASI (similarity). Noer Fikri Offset.

Bizzy, Irwin (2022) Modul Termoelektrik-Teori dan Aplikasi. NoerFikri, Palembang. ISBN 978-602-447-854-4

Paten (2022) PENYEJUK UDARA PENDINGIN TERMOELEKTRIK HIBRID MINI. P00202211153.

Bizzy, Irwin and Darmawi, Darmawi and Mataram, Agung (2022) Laporan Penelitian_Teknologi Hibrid Pendinginan Udara (AC) Mini Hemat Energi dan Ramah Lingkungan dengan Thermoelectric Cooler dan Sel Surya (Tahun ke 2). Project Report. Lembaga Penelitian dan Pengabdian pada Masyarakat Universitas Sriwijaya. (Unpublished)

Bizzy, Irwin and Sipahutar, Riman and Darmawi, Darmawi and Yanis, Muhammad and Khoiri, Muhammad and REZA, MUHAMMAD and Firdaus, Muhammad and Afif R, B.G. and Rachman, F.F. (2022) PENERAPAN TEKNOLOGI TEC-BOX UNTUK MENDINGINKAN MINUMAN KEMASAN DIDESA ULAK KEMBAHANG 2 (Similarity). Turnitin Universitas sriwijaya.

Bizzy, Irwin and Isnurhadi, Isnurhadi and Santoso, Budi (2022) Inovasi Teknologi untuk Meningkatkan Kinerja dan Kualitas Produk Usaha Mikro Kecil Menengah di Desa Ulak Kerbau Baru Kecamatan Tanjung Raja Kabupaten Ogan Ilir Provinsi Sumatera Selatan (Similarity). Turnitin Universitas Sriwijaya.

Bizzy, Irwin and Santoso, Budi and Zahri Kadir, Muhammad (2022) Teknologi Kolektor Surya Berlubang tanpa Kaca Transparan untuk Mengeringkan Daun Gaharu (Similarity). Turnitin Universitas Sriwijaya. (Submitted)

CAHYA, ICHSAN DWI and Nukman, Nukman (2022) ANALISA ENERGI AKTIVASI DAN TEMPERATUR SOLIDUS PADA PENGECORAN ALUMINIUM YANG DITAMBAH SERBUK ARANG BATOK KELAPA. Undergraduate thesis, UNIVERSITAS SRIWIJAYA.

Chandra, Hendri and Abdi, Jusran and Homzah, Homzah and F, Ozkar and Basri, Hasan and Azhari, Ikbal (2022) SIMILARITY OF DESIGN OF AUTOCLAVE FOR FRESH SHRIMP STERILIZATON PROCESS USING FINITE ELEMENT ANALYSIS. Ithenticate Universitas sriwijaya. (Submitted)

DARMAWAN, RACHMAT ARTICO and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM AA 6061 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

DARMAWAN, SANDY DWIKI and Thamrin, Ismail (2022) ANALISIS PENGARUH PENGGUNAAN SPOILER PADA MOBIL SEDAN XYZ DENGAN METODE COMPUTATIONAL FLUID DYNAMICS (CFD). Undergraduate thesis, Sriwijaya University.

DARMAWI, DARMAWI (2022) AKTIFITAS SOSIAL DAN KARYA ILMIAH TERKAIT PENGHEMAT ENERGI VERTIKAL TAHUN 2020 - 2022. LPPM Universitas Sriwijaya.

DARMAWI, DARMAWI (2022) AKTIFITAS SOSIAL MESIN PEMIPIH PURUN DARI TAHUN 2016 HINGGA TAHUN 2022. LPPM Universitas Sriwijaya.

DAULAY, MUHAMMAD BAGUS AL MAKSUM and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN PADA BAJA KARBON TINGGI AISI D2 THIN WALLED DALAM KONDISI KRIOGENIK. Undergraduate thesis, Sriwijaya University.

DEVOTA, M. PONCO WAHYU and Gunawan, Gunawan (2022) PENGEMBANGAN KERAMIK HIDROKSIAPATIT TERDOPING TEMBAGA 3; 3,5 ;4 MOL PADA SINTERING 1200°C. Undergraduate thesis, Sriwijaya University.

DINATA, DENNI OKTA and Yani, Irsyadi (2022) ANALISA BEBAN TUMBUK TERHADAP MATERIAL TURBO FAN ENGINE. Undergraduate thesis, Sriwijaya University.

DWIYAN, FACHRIE AZZUMAR and Basri, Hasan (2022) RANCANG BANGUN PENGGULUNG FILAMEN MESIN EKSTRUSI KAPASITAS 5 KG PER JAM DAN PENGARUHNYA TERHADAP KETEBALAN PRODUK FILAMEN. Undergraduate thesis, Sriwijaya University.

Dahlan, Muhammad Hatta (2022) Similarity Pengolahan Limbah Karet Menggunakan Teknologi Membran Sintesa Polimer. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta (2022) Similarity Pengolahan Limbah Kertas Menjadi Pulp Sebagai Bahan Pengemas Produk Agroindustri. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and DARWIS, AHMAD (2022) (Similarity) Prototype Of Neo-Heat Exchanger From Exhaust Gas Motor Diesel. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and Pratama, Eric Junior and Odina, Mia (2022) Similarity Pengaruh Penggunaan Membran Keramik Berbasis Zeolit Dan Gypsum Terhadap Emisi Gas Co, Nox Kendaraan Bermotor. Turnitin Universitas Sriwijaya. (Submitted)

UMKM dan Pengrajin Purun (2022) PROTOTYPE HAK PATEN MESIN PEMIPIH PURUN. -.

Darmawi, Darmawi (2022) AHLI KOROSI DASAR. -, 1 (1). UNSRI PRESS, Palembang. ISBN 978-623-399-017-2

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR AJST UNTUK ARTIKEL BERJUDUL MAJOR CORRECTION FOR VESA-2 REGARDING THE METHOD OF FLOWING THE AIR FROM THE BOTTOM TO THE TOP. CREATIVE COMMON ATTRIBUTION CC BY. (Unpublished)

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR IJSRP UNTUK ARTIKEL IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. t. (Unpublished)

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR IJSRP UNTUK ARTIKEL: ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG - INDONESIA. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

SENTRA HKI UNSRI (2022) DESKRIPSI DAN BUKTI TERDAFTAR USUL PATEN SEDERHANA TUNGKU PEMANGGANGAN UNTUK TIGA ORANG. -.

Darmawi, Darmawi (2022) HASIL ITHENTICATE DARI ARTIKEL MAJOR CORRECTION FOR VESA-2 REGARDING THE MATHOD OF FLOWING THE AIR FROM THE BOTTOM TO THE TOP. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi (2022) HASIL REVIEW GABUNGAN BPK KUNCORO DAN BPK AGUSTINUS UNTUK ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG - INDONESIA. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) HASIL REVIEW GABUNGAN PAK KUNCORO DAN PAK AGUSTINUS UNTUK IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Hasil Ithenticate untuk artikel berjudul:The Influence of Crevice Gap To The Interface Potential of Aluminium 1100 And Medium Carbon Steel and Its Effect To The Corrosion Rate of Metals. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi (2022) MAJOR CORRECTION FOR VESA-2 REGARDING THE METHOD OF FLOWING THE AIR FROM THE BOTTOM TO HE TOP. ASIAN JOURNAL OF SCIENCE AND TECHNOLOGY, 13 (10). pp. 12219-12222. ISSN 0976-3376

Darmawi, Darmawi (2022) Peer Review dari pak Kuncoro dan pak Agustinus atas buku yang berjudul: AHLI KOROSI DASAR. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Peer Review dari pak Kuncoro, pak Agustinus dan Turnitin dari atikel berjudul: Analysis of Liquid Smoke Production Process From Palm Shell With Integrated Pyrolysis Method. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Penilaian Bpk Kuncoro dan Bpk Agustinus Untuk Artikel berjudul "UNDERSHOT FLOATING WATERWHEEL ......... Universitas Tarumanegara, -. (Unpublished)

Darmawi, Darmawi (2022) Penilaian Bpk Kuncoro dan Bpk Agustinus untuk THE INFLUENCE OF CREVICE GAP TO THE INTERFACE POTENTIAL..... -.

SENTRA HKI UNSRI (2022) SERTIFIKAT PATEN BERJUDUL: TUNGKU PEMANGGANGAN UNTUK TIGA ORANG. IDS000005085.

Darmawi, Darmawi (2022) Undershot Floating Waterwheel a Concept of Small Hydropower Energy Development for Rural Areas of Indonesia. Journal of Mechanical Engineering Research and Developments, 45 (2). 03-09. ISSN 1024-1752

Darmawi, Darmawi and Irwin Bizzy, Irwin and Ellyanie, Ellyanie and Jimmy D Nasution, Jimmy (2022) HASIL ITHENTICATE UNTUK ARTIKEL: IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. Fakultas Teknik Universitas Sriwijaya, New Delhi - India. (Unpublished)

Darmawi, Darmawi and Irwin Bizzy, Irwin and Ellyanie, Ellyanie and Jimmy D Nasution, Jimmy (2022) IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. International Journal of Scientific and Research Publication, 12 (10). pp. 174-181. ISSN 2250-3153

Darmawi, Darmawi and Riman Sipahutar, Riman and Irwin Bizzy, Irwin and Jimmy D Nasution, Jimmy (2022) ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG – INDONESIA. INTERNATIONAL JOURNAL OF DEVELOPMENT RESEARCH, 12 (09). pp. 59296-59299. ISSN 2230-9926

EDIKA, MICHAEL PRATAMA and Marwani, Marwani and Bizzy, Irwin (2022) PROSES PENGERINGAN DAUN GAHARU DENGAN METODE CFB MENGGUNAKAN THERMOELECTRIC COOLER. Undergraduate thesis, Sriwijaya University.

ERAWAN, BRIAN and Bizzy, Irwin (2022) KAJI EKSPRIMENTAL PENDINGIN UDARA MINI DENGAN THERMOELECTRIC COOLER (TEC). Undergraduate thesis, Sriwijaya University.

ERVEGA, FRANDIAZ AGUSTAN and Santoso, Dyos (2022) STUDI EKSPERIMENTAL TURBIN ANGIN SUMBU VERTIKAL DENGAN PRE-SWIRL AUGMENTED. Undergraduate thesis, Sriwijaya University.

Eka Utami, Nurhabibah Paramitha and Yusril Mahendra, Nanda and Akbar, Imam and Gunawan, Gunawan and Romli, Romli and Zulkarnain, Fatoni and Pratiwi, Diah Kusuma (2022) Material Selection And Mechanical Properties In Leaf Spring Application A Review. Austenit, 14 (2). pp. 113-118. ISSN : 2085-1286, 2622-7649

FADILAH, ANAS and Sipahutar, Riman (2022) GASIFIKASI SISTEM UPDRAFT BIOMASSA TEMPURUNG KELAPA DAN SEKAM KAYU DENGAN VARIASI LAJU ALIRAN MASSA UDARA. Undergraduate thesis, Sriwijaya University.

FADILLAH, MUHAMMAD REYHAN and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN PADA PEMESINAN FREIS STAINLESS-STEEL 304 DINDING TIPIS DENGAN PENDINGINAN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

FAHLUCKI, M. FARIZ and Yani, Irsyadi (2022) PERANCANGAN SISTEM KEMUDI DAN SISTEM TRANSMISI KENDARAAN PROTOTYPE SAMARATUNGGA EV. Undergraduate thesis, Sriwijaya University.

FAJRI, MUHAMMAD IFTIKAR and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLIMER POLYVINYLIDENE FLUORIDE (PVDF) DENGAN PENAMBAHAN ZAT ADITIF TIN (IV) DIOXIDE (SNO2) : KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

FAKHRI, ARI and Thamrin, Ismail (2022) ANALISA EFISIENSI POMPA DENGAN VARIASI SUDUT SUDU IMPELLER. Undergraduate thesis, Sriwijaya University.

FAKHRUDIN, DONNY and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN DINAMOMETER PENGUKURAN GAYA TEKAN PADA MESIN GURDI. Undergraduate thesis, Sriwijaya University.

FALAH, AFIF and Arifin, Amir (2022) PENGARUH TEMPERATUR SINTERING PADA KERAMIK HIDROKSIAPATIT TERDOPING TEMBAGA 1, 1.5, DAN 2 MOL. Undergraduate thesis, Sriwijaya University.

FARAMADINA, FARESTA and Mohruni, Amrifan Saladin (2022) PEMBUATAN DETAILED ENGINEERING DESIGN RANGKA DARI MILLING STATION DI PT. CINTA MANIS. Undergraduate thesis, Sriwijaya University.

FAZAL, MUHAMMAD RAFLI and Mataram, Agung (2022) PENGARUH TEMPERATUR POST CURING TERHADAP KEKUATAN IMPAK KOMPOSIT POLYESTER - SERAT SABUT KELAPA. Undergraduate thesis, Sriwijaya University.

FEBRYANTO, BAMBANG and Gunawan, Gunawan (2022) STUDI PENGARUH TEMPERATUR KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PLA. Undergraduate thesis, Sriwijaya University.

FERNANDES, ALFIAN LUIS and Chandra, Hendri (2022) KETAHANAN LELAH BAJA KONSTRUKSI PEGAS DAUN DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

Fajri Vidian, Fajri (2022) Corespondence Author of PREDICTION OF PRODUCER GAS COMPOSITION FROM COAL GASIFICATION USING CYCLE TEMPO. International Academy of Science, Engineering and Technology (IASET). (Submitted)

Fajri Vidian, Fajri (2022) Corespondence Author of Thermodynamic Simulation of Producer Gas Combustion from Biomass Gasification. European Alliance for Innovation. (Submitted)

Fajri Vidian, Fajri (2022) Prediction of Producer Gas Composition from Coal Gasification using Cycle Tempo. International Journal of Mechanical Engineering (IJME), 11 (1). pp. 31-36. ISSN 2319-2240

GERALDO, MUHAMMAD RAFAEL and Bizzy, Irwin (2022) DESAIN KEBUTUHAN PANEL PV MONOCRYSTALLINE 100WP UNTUK RUMAH SEDERHANA. Undergraduate thesis, Sriwijaya University.

GOVANA, ABIZA and Basri, Hasan (2022) STUDI RANCANG BANGUN SISTEM PENDINGIN MESIN EKSTRUSI KAPASITAS 5 KG PER JAM DAN PENGARUHNYA TERHADAP KONSISTENSI KETEBALAN PRODUK FILAMEN. Undergraduate thesis, Sriwijaya University.

Gunawan, Gunawan and ADE SAPUTRA, MUHAMMAD AMSAL and Arifin, Amir and Firdaus, Aneka (2022) Recycling Of Aluminum-Based Composites Reinforced With Fly Ash And Alumina Via A Stir-Squeeze Casting Process. Journal of Mechanical Science and Engineering,, 9 (1). pp. 1-6. ISSN 2354-9467

H.S, Jhonprimen and Turnip, Andreas and Dahlan, Muhammad Hatta (2022) Similarity Pengaruh Massa Ragi, Jenis Ragi dan Waktu Fermentasi pada Bioetanol Biji Durian. Turnitin Universitas Sriwijaya. (Submitted)

HABIBURAHMAN, JA’FAR and Pratiwi, Diah Kusuma (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP BERDASARKAN PERBEDAAN DIMENSI CETAKAN LOGAM PERSEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

HAFIDZ, M DZAKY and Chandra, Hendri (2022) KARAKTERISTIK PATAH DAN KETAHANAN LELAH BESI COR MALLEABLE. Undergraduate thesis, Sriwijaya University.

HAMDANI, RIZKI and Barlin, Barlin (2022) PENGARUH RASIO MASSA KATALIS DAN SAMPAH PLASTIK TERHADAP KARAKTERISTIK MINYAK HASIL PIROLISIS. Undergraduate thesis, Sriwijaya University.

HAMZAH, AHMAD and Zulkarnain, Zulkarnain (2022) PENGEMBANGAN PENGUNCI PINTU OTOMATIS BERBASIS JARAK DAN SUHU MENGGUNAKAN ARDUINO. Undergraduate thesis, Sriwijaya University.

HARDIYANTO, DWIKI and Hadi, Qomarul (2022) PENGARUH VARIASI BEBAN KOMPAKSI PADA PEMBUATAN KOMPOSIT MATRIK KERAMIK CaCO3/FLY-ASH TERHADAP DENSITAS DAN KEAUSAN. Undergraduate thesis, Sriwijaya University.

HASAN, WIRATAMA and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN TIMAH DIOKSIDA (SnO2) DENGAN PENCAMPURAN POLYETHERSULFONE (PES): KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

HIDAYAT, MUHAMMAD TAUFIK and Bizzy, Irwin (2022) KAJI EKSPERIMENTAL KOTAK PENDINGIN DENGAN THERMOELECTRIC COOLER VARIASI KECEPATAN ALIRAN AIR. Undergraduate thesis, Sriwijaya University.

HIDAYATULLAH, ANDRE BRILIAN and Adanta, Dendy (2022) ANALISIS PENDEKATAN SEGITIGA KECEPATAN DAN PENGUJIAN EKSPERIMENTAL TURBIN TURGO SKALA PIKO. Undergraduate thesis, Sriwijaya University.

HUTAPEA, FELIX THEO YUSAMA and Puspitasari, Dewi (2022) KAJI EKSPERIMENTAL PENGARUH UKURAN PARTIKEL TERHADAP EFISIENSI PEMISAHAN DUAL CYCLONE SEPARATOR. Undergraduate thesis, Sriwijaya University.

Handayani, Ade SIlvia and Nurmaini, Siti and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Brief Review on Formation Control of Swarm Robot. Turnitin Universitas Sriwijaya.

Hidayati, Baiti and Sipahutar, Riman and Bizzy, Irwin and Faizal, Muhammad (2022) INCREASED PRODUCTIVITY OF LIQUID SMOKE THROUGH FAST THAWING WITH REFRIGERATION SYSTEMS AT LOW AIR TEMPERATURES. Journal of Applied Engineering Science, 20 (1). pp. 79-84. ISSN 1451-4117

ICHSAN, MUHAMMAD RYANDI and Zulkarnain, Zulkarnain (2022) PERANCANGAN MOBILE ROBOT PEMADAM KEBAKARAN OTOMATIS PENJEJAKAN LINTASAN DENGAN MENGGUNAKAN METODE DEAD RECKONING. Undergraduate thesis, Sriwijaya University.

ILAHI, AHMAD FAUZI and Vidian, Fajri (2022) ANALISIS EKSERGI PADA GASIFIKASI BIOMASSA. Undergraduate thesis, Sriwijaya University.

IRHAM, MUHAMMAD RIDHO and Mohruni, Amrifan Saladin (2022) PENGAPLIKASIAN COMPUTER INTEGRATED MANUFACTURING DALAM PENGELOLAAN SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS), STUDI KASUS : REGISTRASI INVENTARIS BUKU PADA RUANG BACA JURUSAN YANG TERDAPAT PADA FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: Automatic Identification of Plastic Waste by HSV Colour. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Irsyadi, Yani (2022) Peer Review: Analysis of a cans waste classification system based on the CMYK color model using different metric distances on the k�means method. Fakultas Teknik Universitas Sriwijaya.

Irsyadi, Yani (2022) Peer Review: The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Turnitin Universitas Sriwijaya. (Submitted)

Irsyadi, Yani (2022) peer review; A comparison of degradation rate bone scaffold morphology between computer simulation and experimental approach. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

KAMIL, MUHAMMAD IHSAN and Mohruni, Amrifan Saladin (2022) PEMBUATAN PROTOTIPE DATABASE INVENTORI STUDI KASUS DI PERPUSTAKAAN BERDASARKAN TEKNOLOGI RADIO FREQUENCY IDENTIFICATION. Undergraduate thesis, Sriwijaya University.

KHOIR, M. ILHAM and Astuti, Astuti (2022) PENGARUH KONSENTRASI 0,3%, 0,5%, DAN 0,7% PARTIKEL TiO2 TERHADAP KOEFISIEN KONVEKSI PADA DOUBLE PIPE HEAT EXCHANGER. Undergraduate thesis, Sriwijaya University.

KUSUMA BAYU, MUHAMMAD GALUH and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS SURFACE ROUGHNESS MATERIAL STAINLESS STEEL 304 DINDING TIPIS PADA MESIN MILLING MENGGUNAKAN PENDINGIN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

MANDALIKA, ADE MAHFUZH and Zulkarnain, Zulkarnain (2022) RANCANG BANGUN MOBILE ROBOT PENDETEKSI WARNA, SUHU DAN GAMBAR DENGAN PENGENDALI BLUETOOTH. Undergraduate thesis, Sriwijaya University.

MANDIANGAN, SAMUEL CAESARIO and Yanis, Muhammad (2022) ANALISIS GETARAN PEMESINAN FRAIS DAN PENGUJIAN WIRELESS ACCELEROMETER SENSOR DENGAN ARDUINO-ESP32. Undergraduate thesis, Sriwijaya University.

MERDEKA, ALBERTUS PUTRA and Puspitasari, Dewi (2022) STUDI PENGARUH TEMPERATUR TERHADAP KARAKTERISTIK BAHAN BAKAR MINYAK HASIL PIROLISIS GABUNGAN SAMPAH PLASTIK JENIS POLYSTYRENE (PS) DAN LOW-DENSITY POLYETHYLENE (LDPE). Undergraduate thesis, Sriwijaya University.

MULPI, MULPI and Santoso, Dyos (2022) PEMANFAATAN PRE-SWIRL AUGMENTED PADA TURBIN SAVONIUS DENGAN TIGA SUDU HELIX. Undergraduate thesis, Sriwijaya University.

Marhaini, Marhaini and Faizal, Muhammad and Dahlan, Muhammad Hatta and Marsi, Marsi and Arinafril, Arinafril (2022) Similiarity Bioremediasi Air Limbah Pabrik Pupuk Urea oleh Bakteri Pseudomonas fluorescen. Turnitin Universitas Sriwijaya. (Submitted)

Mataram, Agung (2022) Characteristics of a PVDF–Tin Dioxide Membrane Assisted by Electric Field Treatment (Similarity). MDPI.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNTVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA PROGRAM STUDI MAGISTER TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022 0075/UN9.FT/TU.SK/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Peer Review_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Similarity_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Turnitin Universitas Sriwijaya. (Submitted)

NEGARA, RENALDI TRI KUSUMA and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN MANAGEMENT INVENTORY DATABASE MENGGUNAKAN APLIKASI SENAYAN LIBRARY MANAGEMENT SYSTEM (SLiMS) DENGAN STUDI KASUS REGISTRASI INVENTARIS BUKU PADA RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA MENGGUNAKAN METODE COMPUTER INTEGRATED MANUFACTURING. Undergraduate thesis, Sriwijaya University.

NURQOSIM, MALIK and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN DAN PENERAPAN APLIKASI DATABASE BERBASIS SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS) MENGGUNAKAN TEORI COMPUTER INTEGRATED MANUFACTURING (CIM) DI RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwiajaya. (Submitted)

Nukman, Nukman and Surya, Indra and Liantara, Rizki and Yani, Irsyadi and Arifin, Amir (2022) TGA / DTA Analysis for AA6061 with Fine Coal Blend. In: Sriwijaya International Conference on Engineering and Technology 2021 (SICETO 2021), 25-26 October 2021, Palembang. (In Press)

OKTAVIANI, SEPTA and Arifin, Amir (2022) STUDI PENGARUH TEKANAN KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PVA. Undergraduate thesis, Sriwijaya University.

PAMUNGKAS, MAULANA BUANA and Zulkarnain, Zulkarnain (2022) PENERAPAN SENSOR ULTRASONIC SEBAGAI PENGHINDAR HALANGAN PADA PERANCANGAN ROBOT PEMADAM KEBAKARAN OTOMATIS. Undergraduate thesis, Sriwijaya University.

PANGESTU, WAHYU AJI and Yanis, Muhammad (2022) KOMPARASI PENGGUNAAN CAIRAN PEMOTONGAN MINYAK CASTOR DAN MINYAK JAGUNG DENGAN CAMPURAN NANO AL2O3 PADA PROSES FREIS. Undergraduate thesis, Sriwijaya University.

PEBRINALDI, ARIF and Zulkarnain, Zulkarnain (2022) PENGEMBANGAN MOBIL ROBOT LINE FOLLOWER BERBASIS ARDUINO UNO. Undergraduate thesis, Sriwijaya University.

PRADANA, ALDYS MEICHAL and Mohruni, Amrifan Saladin and Saputra, Ade (2022) PENGEMBANGAN SISTEM INVENTORY MANAGEMENT RUANG BACA DENGAN METODE COMPUTER INTEGRATED MANUFACTURING (CIM) DI FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

PRAMANA, ANGGA SAPTO and Zulkarnain, Zulkarnain (2022) ANALISIS ROBOT PEMADAM KEBAKARAN OTOMATIS MENGGUNAKAN SENSOR PANAS, ALARM DAN KIPAS PEMADAM. Undergraduate thesis, Sriwijaya Unviersity.

PRAMANA, ROY and Abidin, Zainal (2022) ANALISIS DISTRIBUSI TEGANGAN REGANGAN DAN PERPINDAHAN PADA BEJANA TEKAN LPG KAPASITAS 3 KG DENGAN BANTUAN SOFTWARE 2020. Undergraduate thesis, Sriwijaya University.

PRANATAMA, ASYQAR and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN BERBASIS STRAIN GAUGE IMPULSE HAMMER UNTUK ANALISIS PARAMETER DINAMIK. Undergraduate thesis, Sriwijaya University.

PRATAMA, RANDI and Basri, Hasan (2022) RANCANG BANGUN SINGLE SCREW EKSTRUDER DAN ANALISIS PENGARUH KECEPATAN SCREW TERHADAP AKURASI DIMENSI FILAMEN POLYLACTIC ACID. Undergraduate thesis, Sriwijijaya University.

PRATAMA, RIZAL ADI and Marwani, Marwani (2022) KAJIAN EKSPERIMENTAL KINERJA PYROLISYS REAKTOR PLASTIC MENJADI MINYAK CAIR DENGAN PROSES PIROLISIS CEPAT. Undergraduate thesis, Sriwijaya University.

PRATAMA H, M. YOGA and Marwani, Marwani (2022) PENGARUH TEMPERATUR DAN WAKTU PEMANASAN TERHADAP SAMPAH PLASTIK LDPE (LOW DENSITY POLYETHYLINE). Undergraduate thesis, Sriwijaya University.

PRIYAMBODO, RYAS AKBAR and Sipahutar, Riman (2022) ANALISIS MASSA GAS PADA PROSES GASIFIKASI BATUBARA DAN SEKAM KAYU DENGAN VARIASI LAJU ALIRAN MASSA UDARA DAN UKURAN. Undergraduate thesis, Sriwijaya university.

RAHMADDIN, MUHAMMAD ANDI and Marwani, Marwani (2022) ANALISIS PERFORMANSI TURBIN HIDRO PICO PIPA AIR TERHADAP PERUBAHAN DEBIT AIR. Undergraduate thesis, Sriwijaya University.

RAMADHAN, DWIKI and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN ALUMINIUM OKSIDA. Undergraduate thesis, Sriwijaya University.

RAMADHAN, MUHAMMAD FADLY and Abidin, Zainal (2022) ANALISIS DISTRIBUSI TEGANGAN, REGANGAN, DAN PERPINDAHAN PROSTESIS DISKUS INTERVERTEBRALIS PADA POSISI FLEKSI. Undergraduate thesis, Sriwijaya University.

RAMADHAN, RAHMAT and Hadi, Qomarul (2022) PENGARUH UNSUR PENCAMPUR PADA PEMBUATAN MATERIAL KOMPOSIT BERPENGUAT FLY ASH TERHADAP DENSITAS DAN KEAUSAN. Undergraduate thesis, Sriwijaya University.

RAMADHANI, MUHAMMAD RAFLY and Yani, Irsyadi (2022) ANALISIS FAN PADA TURBOFAN ENGINE DENGAN METODE COMPUTATIONAL FLUID DYNAMICS (CFD). Undergraduate thesis, Sriwijaya University.

RIFQY, MUHAMMAD ABIL and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN TITANIUM DIOKSIDA. Undergraduate thesis, Sriwijaya University.

RINALDI, FARRAS and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN IMPULSE HAMMER DENGAN TRANSDUSER GAYA BERBASIS STRAIN GAUGE UNTUK BENDA UJI BERDIMENSI KECIL. Undergraduate thesis, Sriwijaya University.

RIVALDI, M IKHSAN and Bizzy, Irwin (2022) STUDI EKSPERIMENTAL KOTAK PENDINGIN DENGAN THERMOELECTRIC COOLER (TEC). Undergraduate thesis, Sriwijaya University.

RUSNADI, ILHAM BINTANG and Sipahutar, Riman (2022) PENERAPAN MOTOR LISTRIK BRUSHLESS DIRECT CURRENT HUB PADA MOTOR BAKAR KONVENSIONAL. Undergraduate thesis, Sriwijaya University.

Resti, Yulia and Mohruni, Amrifan Saladin and Burlian, Firmansyah and Irsyadi, Yani (2022) Similarity_A probability approach in cans identification. Turnitin Universitas Sriwiajaya. (Submitted)

SAK'BAN, MUHAMMAD REDY and Sahim, Kaprawi (2022) STUDI EKSPERIMENTAL TURBIN ANGIN GABUNGAN DARRIEUS-SAVONIUS PADA 3 VARIASI TINGGI ROTOR SAVONIUS DIPASANG DILUAR TURBIN DARRIEUS. Undergraduate thesis, Sriwijaya University.

SATRIO, ROBY ADI and Nukman, Nukman (2022) ANALISA ENERGI AKTIVASI DAN TEMPERATUR SOLIDUS PADA PENGECORAN ALUMINIUM YANG DITAMBAH SERBUK ARANG KAYU. Undergraduate thesis, Sriwijaya University.

SIREGAR, HARIMAN and Marwani, Marwani (2022) ANALISIS EKSERGI SISTEM PEMBANGKIT LISTRIK TENAGA UAP DI PT PLN (PERSERO) UNIT PLTGU INDRALAYA SUMATERA SELATAN. Undergraduate thesis, Sriwijaya University.

SUITO, PANGKI and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM PADUAN 7075 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

SUPROYADI, SUPROYADI and Adanta, Dendy (2022) METODE MANUFAKTUR SUDU TURBIN TURGO SKALA PIKO MENGGUNAKAN TEKNOLOGI 3D PRINTER. Undergraduate thesis, Sriwijaya University.

SYAUKANI, MUHAMMAD MAULVY and Yanis, Muhammad (2022) ANALISIS PENGARUH PENGGUNAAN NANO-CUTTING FLUID PADA PROSES FREIS TERHADAP KEKASARAN PERMUKAAN MENGGUNAKAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

Sipahutar, Riman and Bizzy, Irwin and Faizal, Muhammad and Maussa, Olistiyo (2022) Bio-coal briquettes made from South Sumatera low rank coal and palm shell charcoal for using in small industries (Similarity). Turnitin Universitas Sriwijaya. (Submitted)

TARIGAN, RITCHI EPHIPANIAS and Puspitasari, Dewi (2022) STUDI EKSPERIMENTAL VARIASI SAMPEL UJI TERHADAP EFISIENSI PENYARINGAN UDARA MENGGUNAKAN DUAL CYCLONE SEPARATOR. Undergraduate thesis, Sriwijaya University.

TIMOTHY, ANDREAS and Marwani, Marwani (2022) PEMANFAATAN PANEL SURYA PHOTOVOLTAIC PADA HELM MOTOR UNTUK CHARGER HANDPHONE. Undergraduate thesis, Sriwijaya University.

TINAMBUNAN, MUHAMMAD REZA and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN MULTI WALL CARBON NANO TUBE. Undergraduate thesis, Sriwijaya University.

TRIFARIZY, MUHAMAD DAVID and Marwani, Marwani (2022) EFEK TEMPERATUR TERHADAP PROPERTIES MINYAK HASIL PROSES PIROLISIS MENGGUNAKAN SAMPAH PLASTIK HYBRID JENIS HIGH-DENSITY POLYETHYLENE (HDPE) DAN POLYPROPYLENE (PP). Undergraduate thesis, Sriwijaya University.

Universitas Sriwijaya, Prodi S1-Teknik Mesin (2022) Attendance for the course: 2122-02-TKM241514 GETARAN MEKANIK (VIBRATION MECHANICS) Semester Genap 2021-2022. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

VASHA, MUHAMMAD BADDLY and Santoso, Dyos (2022) STUDI EKSPERIMENTAL TURBIN ANGIN SUMBU VERTIKAL DENGAN SUDU PENGARAH. Undergraduate thesis, Sriwijaya University.

Vidian, Fajri (2022) Clarification of Corespondence Author of Thermodynamic Simulation of Producer Gas Combustion from Biomass Gasification. European Alliance for Innovation. (Submitted)

WAHID, ABDURRAHMAN and Thamrin, Ismail (2022) STUDI PENGARUH VARIASI PERBANDINGAN COOLANT-WATER TERHADAP EFEKTIVITAS RADIATOR. Undergraduate thesis, Sriwijaya University.

WAHID, FEBRI ABDUL and Barlin, Barlin (2022) STUDI PENGARUH TEMPERATUR PIROLISIS SAMPAH PLASTIK TERHADAP KARAKTERISTIK BAHAN BAKAR MINYAK YANG DIHASILKAN. Undergraduate thesis, Sriwijaya University.

WAHYUDI, DICKY and Yani, Irsyadi (2022) PENGEMBANGAN MOBIL ROBOT PEMADAM API BERBASIS MIKROKONTROLER ARDUINO UNO. Undergraduate thesis, Sriwijaya University.

WIDAD, MUHAMMAD and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY DIE CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

WIJAYANTO, ILHAM GUSTI and Arifin, Amir (2022) STUDI PENGARUH TEMPERATUR KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PVA. Undergraduate thesis, Sriwijaya University.

YAHYA, M ALDI and Thamrin, Ismail (2022) ANALISS PENGARUH JUMLAH FAN BLADE DENGAN VARIASI CAIRAN PENDINGIN TERHADAP EFEKTIFITAS RADIATOR. Undergraduate thesis, Sriwijaya University.

YESA, DANEL REKA and Sahim, Kaprawi (2022) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK PERSEGI EMPAT. Undergraduate thesis, Sriwijaya University.

Yani, Irsyadi (2022) Surat Tugas Presiden Himpunan Matematika Indonesia No 0144/Pres/IndoMS/SK/IV/2023_Penetapan Pengurus Himpunan Matematika Indonesia (The Indonesian Mathematical Society/IndoMS) Wilayah Sumatera Bagian Selatan. Prodi S1-Teknik Mesin.

Yani, Irsyadi and Arifin, Amir and ZAHIR, MUHAMMAD (2022) Plagiarism and Similarity Checker of Design Optimization in Stress Distribution of Firing Pin Rifle by Impact Force Using Finite Element Modelling. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Budiman, Anton Indra (2022) Plagiarism and Similarity Checker of Development of Identification System of cans And Bottle. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Odor Classification Using Support Vector Machine. Turnitin Universitas Sriwiajaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Target Tracking in Mobile Robot under Uncertain Environment using Fuzzy Logic Controller. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Odor Localization Sub Tasks: A Survey. Turnitin Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Swarm Intelligent in Bio-Inspired Perspective: A Summary. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Resti, Yulia and Burlian, Firmansyah (2022) Plagiarism and Similarity Checker of Identification of bearing failure using signal vibrations. Turnitin Universitas Sriwiajaya. (Submitted)

ZHAFRAN, WIRA and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY SAND CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

Zulkarnain, Ali Leman and Thamrin, Ismail (2022) CF Letter Peer Review Zulkarnain. FT Unsri.

darmawi, darmawi (2022) KESERTAAN MPP GEN-2 DAN VESA-2EA DALAM EXPO HASIL PENELITIAN DAN PENGABDIAN UNSRI TAHUN 2022. Universitas Sriwijaya.