Items where Author is "Pratiwi, Diah Kusuma"

Article

Arifin, Amir and Pratiwi, Diah Kusuma and Gunawan, Gunawan (2023) Investigation of Welding Parameters of Dissimilar Weld of SS316 and ASTM A36 Joint Using a Grey-Based Taguchi Optimization Approach. Journal of Manufacturing and Materials Processing, 7 (1). pp. 1-16. ISSN 2504-4494

Eka Utami, Nurhabibah Paramitha and Yusril Mahendra, Nanda and Akbar, Imam and Gunawan, Gunawan and Romli, Romli and Zulkarnain, Fatoni and Pratiwi, Diah Kusuma (2022) Material Selection And Mechanical Properties In Leaf Spring Application A Review. Austenit, 14 (2). pp. 113-118. ISSN : 2085-1286, 2622-7649

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Tribun Sumsel Palembang.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. International Journal of Emerging Trends in Engineering Research, 8 (9). pp. 5688-5692. ISSN 2347 - 3983

Sipahutar, Riman and Pratiwi, Diah Kusuma and Darmawi, Darmawi and Bizzy, Irwin and HIDAYATI, BAITI (2020) Analysis of Upgrading Process of South Sumatera Low Rank Coal. Journal of Physics: Conference Series, 1500 (012026). pp. 1-7. ISSN 1742-6596

Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Sofijan, Armin and HIDAYATI, BAITI (2020) Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Conference Series: Materials Science and Engineering 620:012056, 909 (012032). pp. 1-8. ISSN 1757-8981

Sipahutar, Riman and Pratiwi, Diah Kusuma and Arifin, Amir and Bizzy, Irwin (2019) The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier. IOP Conf. Series: Journal of Physics: Conf. Series, 1167 (012007). pp. 1-12. ISSN 1742-6588E-ISSN:1742-6596

Andalia, Winny and Pratiwi, Diah Kusuma and Arita, Susila (2019) Analysis of Biodiesel Conversion on Raw Material Variation Using Statistical Process Control Method. Journal of Physics: Conference Series, 1167. ISSN 1742-6596

Sipahutar, Riman and Pratiwi, Diah Kusuma and Arifin, Amir and Bizzy, Irwin (2019) The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier. Journal of Physics: Conference Series, 1167 (012007). pp. 1-12. ISSN 1742-6596

Arifin, Amir and Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Purba, Dwi and Gunawan, Gunawan (2018) EFFECT OF FLY ASH AS REINFORCEMENT ON MECHANICAL PROPERTIES OF ALUMINUM SCRAP BASED HYBRID COMPOSITE. Journal of Engineering Science and Technology (JESTEC), 13 (10). pp. 3080-3091. ISSN 1823-4690

Pratiwi, Diah Kusuma and Sipahutar, Riman and Arifin, Amir (2017) Study of Bio-Coal Briquette as Solid Fuel for Aluminum Smelter. Sriwijaya Journal of Environment, 2 (3). pp. 99-101. ISSN 2527-3809

Bizzy, Irwin and Sipahutar, Riman and Mohruni, Amrifan Saladin and Kadir, M. Zahri and Marwani, Marwani and Pratiwi, Diah Kusuma (2017) ALAT PEMANGGANG TIPE KONTINYU MEMAKAI TEKNOLOGI INFRARED BURNER BERBAHAN BAKAR GAS. Seminar Nasional AVoER. pp. 615-618. ISSN 978-979-19072-6-2

Pratiwi, Diah Kusuma (2017) Effect of aging time 200 °C on microstructure behavior of Al- Zn-Cu-Mg cast alloys. MATEC Web of Conferences, 101 (01008). pp. 1-6. ISSN 2261-236X

Pratiwi, Diah Kusuma (2012) Hubungan Jenis Cetakan Terhadap Kualitas Produk Cor Aluminium. Proceeding of the 11th Annual Seminar on Mechanical Engineering (SNTTM XI), 01 (01). pp. 1846-1851.

Pratiwi, Diah Kusuma (2012) Pengaruh Histerisis Terhadap Sifat Mekanik Baja Karbon Rendah. Proceeding of the 11th Annual Seminar on Mechanical Engineering (SNTTM XI), 01 (01). pp. 1852-1855.

Book Section

Pratiwi, Diah Kusuma (2011) OPTIMASI DESAIN SISTEM TERMAL PADA RUANG BAKAR TUNGKU PENGECORAN KUNINGAN MENGGUNAKAN BRIKET BATUBARA KALORI RENDAH. In: Prosiding Seminar Nasional AVoER ke-3. Fakultas Teknik Universitas Sriwijaya, Palembang, pp. 9-15.

Monograph

Pratiwi, Diah Kusuma and Sipahutar, Riman and Mohruni, Amrifan Saladin and Abidin, Zainal and Kadir, Muhammad Zahri and Santoso, Dyos and Marwani, Marwani and Ellyanie, Ellyanie and Astuti, Astuti (2011) PENYULUHAN DAN PERCONTOHAN OVEN PENGERING UNTUK MENGATASI KENDALA CUACA DAN MENINGKATKAN KUALITAS PADA INDUSTRI RUMAH TANGGA KEMPLANG DI DESA TEBING GRINTING UTARA. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Conference or Workshop Item

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2016) ANALISA PENGARUH HISTERISIS TERHADAP NILAI KEKERASAN BAJA KARBON MEDIUM. In: SEMINAR NASIONAL AVOER 8 Applicable Innovation of Engineering and Science Researches, 19‐20 Oktober 2016, Palembang, Indonesia.

Book

Pratiwi, Diah Kusuma (2011) Prosiding Seminar Nasional AVoER ke-3 Tahun 2011. Seminar AvoER, 3 (1). Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia, pp. 1-493. ISBN 979-587-395-4

Pratiwi, Diah Kusuma (2011) SEMINAR NASIONAL ADDED VALUE OF ENERGY RESOURCES (AVoER) Ke-3. Seminar Nasional AVoER, 3 (-). Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. ISBN 979-587-395-4

Thesis

SIREGAR, SAMUEL and Pratiwi, Diah Kusuma (2024) ANALISA KEKUATAN TARIK DAN STRUKTUR MIKRO FILAMEN POLYETHYLENE TEREPHTHALATE (PET) DENGAN VARIASI INFILL DAN KECEPATAN UNTUK DIAMETER NOZEL 0,4 MM DAN LAYER THICKNESS 0,2 MM. Undergraduate thesis, Sriwijaya University.

Pangestu, Muhammad Yudi and Pratiwi, Diah Kusuma (2024) PENGARUH PENGGUNAAN NOZEL 0,6 MM DAN LAYER THICKNESS 0,3 MM TERHADAP KEKUATAN TARIK DAN STRUKTUR MIKRO FILAMENT 3D PRINTING POLYETHYLENE TEREPHTHLATE. Undergraduate thesis, Sriwijaya University.

FAYAKUN, MUHAMMAD AKBAR and Pratiwi, Diah Kusuma (2024) SIMULASI CRASHWORTHINESS EASIEST TO BREAK RANGKA PELINDUNG SENSOR SRIFADA DARI ALUMINIUM ALLOY 2024. Undergraduate thesis, Sriwijaya University.

SAJID, HAFIZ and Pratiwi, Diah Kusuma (2024) SIMULASI CRASHWORTHINESS EASIEST TO BREAK RANGKA PELINDUNG SENSOR SRIFADA DARI BAJA ST 37. Undergraduate thesis, Sriwijaya University.

LAKSANA, DWI AGUNG and Pratiwi, Diah Kusuma (2024) KOROSI DI BAWAH INSULASI DALAM AIR LAUT DAN AIR RAWA PADA BAJA A36 YANG DIANIL. Undergraduate thesis, Sriwijaya University.

ALHADDAT, MUHAMMAD SURYAWAN and Pratiwi, Diah Kusuma (2024) KOROSI DIBAWAH INSULASI PADA BAJA A36 DI PWHT PADA MEDIA AIR LAUT. Undergraduate thesis, Sriwijaya University.

PUTRA, MUHAMMAD DEAN ANWARSYAH and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) CORROSION UNDER INSULATION MEDIA AIR LAUT DAN AIR RAWA PADA PENGELASAN BAJA A36 YANG DI-PREHEAT. Undergraduate thesis, Sriwijaya University.

ALFARABY, MUHAMMAD DILFU and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) CORROSION UNDER INSULATION MEDIA AIR LAUT DAN AIR RAWA PADA PENGELASAN BAJA A36 YANG DINORMALISASI. Undergraduate thesis, Sriwijaya University.

RIDHO, ARDA ROSHID and Pratiwi, Diah Kusuma (2023) PENGARUH QUENCHING SETELAH PENGELASAN TERHADAP KOROSI DI BAWAH INSULASI MEDIA AIR LAUT PADA BAJA A36. Undergraduate thesis, Sriwijaya University.

PERMADI, FAJAR GALIH and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) PENGARUH PENGELASAN TERHADAP KOROSI DI BAWAH ISOLASI DENGAN MEDIA AIR LAUT DAN AIR RAWA PADA BAJA ASTM A36. Undergraduate thesis, Sriwijaya University.

SAPUTRA, MUHAMMAD RACHMAT and Pratiwi, Diah Kusuma (2023) DISSIMILAR BUTT JOINT ASTM A36 DAN SS 304 MENGGUNAKAN SMAW DENGAN ELEKTRODA E6010 DAN E308-16. Undergraduate thesis, Sriwijaya University.

NUGROHO, AGUS and Pratiwi, Diah Kusuma (2023) PENGARUH PENDINGINAN CEPAT SETELAH PENGELASAN TERHADAP KOROSI DIBAWAH INSULASI DALAM MEDIA AIR RAWA PADA BAJA ASTM A36 SKALA LABORATORIUM. Undergraduate thesis, Sriwijaya University.

ALKAHFI, ARIEF and Pratiwi, Diah Kusuma (2022) ANALISA PENGARUH PERLAKUAN PANAS TERHADAP LAJU KOROSI ASTM A36 DALAM AIR RAWA. Master thesis, Sriwijaya University.

BASTIAR, BERTAWAN and Pratiwi, Diah Kusuma and Mataram, Agung (2022) ANALISIS PEMAKAIAN WEAR PLATE ALTERNATIF UNTUK MENGATASI KEAUSAN PADA VERTICAL COAL MILL. Master thesis, Universitas Sriwijaya.

ZHAFRAN, WIRA and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY SAND CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

WIDAD, MUHAMMAD and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY DIE CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

PRATAMA, RANDI GAGA PISASEFSIO and Pratiwi, Diah Kusuma (2022) PENGARUH VARIASI PERLAKUAN PANAS 750 °C TERHADAP LAJU KOROSI AIR LAUT PADA ASTM A36. Master thesis, Sriwijaya University.

HABIBURAHMAN, JA’FAR and Pratiwi, Diah Kusuma (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP BERDASARKAN PERBEDAAN DIMENSI CETAKAN LOGAM PERSEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

HILMAWAN, HILMAN and Pratiwi, Diah Kusuma and Mataram, Agung (2021) ANALISIS SIFAT FISIK DAN MEKANIK AISI 4130 PADA TEMPORARY WELLHEAD AKIBAT PENGELASAN BERULANG. Master thesis, Sriwijaya University.

YUDIANTO, YUDIANTO and Pratiwi, Diah Kusuma and Mataram, Agung (2021) STUDI KASUS KERUSAKAN POROS POMPA BENAM LISTRIK PADA SUMUR MINYAK DI PERUSAHAAN MIGAS YANG BERLOKASI DI MUARA ENIM. Master thesis, Sriwijaya University.

HISJAM, MACHRUS and Pratiwi, Diah Kusuma (2021) VARIASI WAKTU PELAPISAN ELEKTROPLATING MENGGUNAKAN NIKEL PADA BAJA KARBON RENDAH SS400. Undergraduate thesis, Sriwijaya University.

FARHAN, MUHAMMAD and Pratiwi, Diah Kusuma (2021) ANALISA PENGELASAN DISSIMILAR BAJA KARBON TINGGI DAN BAJA KARBON RENDAH MENGGUNAKAN SHIELDED METAL ARC WELDING DAN POST WELD HEAT TREATMENT. Undergraduate thesis, Sriwijaya University.

YUSRAN, FARIZ and Pratiwi, Diah Kusuma (2021) ANALISA DISSIMILAR WELDING BAJA KARBON RENDAH DAN BAJA KARBON TINGGI MENGGUNAKAN SMAW DENGAN ELEKTRODA E7018 ARUS I=100A PADA KONDISI AS WELD. Undergraduate thesis, Sriwijaya University.

HUTABARAT, ABRAHAM PARTOGI and Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2021) ANALISIS KERUSAKAN PADA BUSHING APRON FEEDER. Undergraduate thesis, Sriwijaya University.

SUHADA, REZA ANDRE and Pratiwi, Diah Kusuma (2021) ANALISA PENGELASAN BESI COR KELABU ASTM A48 CLASS 40 MENGGUNAKAN SMAW. Undergraduate thesis, Sriwijaya University.

ALFAHRIZI, ALDI DWI and Pratiwi, Diah Kusuma (2020) PENGELASAN BESI COR KELABU MENGGUNAKAN SHIELDED METAL ARC WELDING YANG DI POST WELD HEAT TREATMENT. Undergraduate thesis, Sriwijaya University.

MAHESA, BIMA GUSTI AGUNG and Pratiwi, Diah Kusuma (2020) PENGELASAN PREHEAT BESI COR KELABU MENGGUNAKAN SMAW. Undergraduate thesis, Sriwijaya University.

NUGRHO, SIGIT and Pratiwi, Diah Kusuma (2020) KAJIAN SIFAT FISIK DAN MEKANIK REFRACTORY MATERIAL SEMEN TAHAN API UNTUK VARIASI BERAT FLY ASH 40%, 50%, DAN 60%. Undergraduate thesis, Sriwijaya University.

CATUR, MUHAMMAD ICHSAN RUSMIN NURZA UTAMA and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN LOGAM (DIAMOND MOLD) TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.

FALENTRI, REGA and Pratiwi, Diah Kusuma (2020) ANALISIS LAJU KOROSI TEGANGAN PADA SS 304L GTAW I=90A I=120A DENGAN VARIASI BENTUK DAN MEDIA AIR RAWA. Undergraduate thesis, Sriwijaya University.

AZIM, ABDURRAHMAT and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN PASIR BERBENTUK DIAMOND MOLD TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.

PERNANDA, ERICK JUNION and Pratiwi, Diah Kusuma (2020) ANALISIS LAJU KOROSI TEGANGAN PADA SS 304 L. Undergraduate thesis, Sriwijaya University.

ZANKULANI, AHMAD FARIZI and Pratiwi, Diah Kusuma (2020) PENGARUH VARIASI DIMENSI CETAKAN KERAMIK BERBENTUK DIAMOND MOLD TERHADAP SIFAT FISIK DAN MEKANIK PRODUK COR ALUMINIUM SKRAP. Undergraduate thesis, Sriwijaya University.

PUTRA, OKTARIAWAN DIKA and Pratiwi, Diah Kusuma and Sipahutar, Riman (2020) KAJIAN PENGGUNAAN PENGELASAN SMAW UNTUK MENGATASI KERUSAKAN BUCKET APRON FEEDER. Master thesis, Sriwijaya University.

RAMADHAN, MUHAMMAD FATHI and Pratiwi, Diah Kusuma (2019) PENGELASAN LAP JOINT SS 304L MENGGUNAKAN TIG DAN SMAW BERARUS 90A DAN 120A. Undergraduate thesis, Sriwijaya University.

JATNIKA, BHAKTI GUNAWAN and Pratiwi, Diah Kusuma (2019) ANALISA KERUSAKAN PADA SHAFT APRON FEEDER. Undergraduate thesis, Sriwijaya University.

CHANDRA, THEO and Pratiwi, Diah Kusuma (2019) ANALISIS KERUSAKAN PADA BUCKET APRON FEEDER. Undergraduate thesis, Sriwijaya University.

JULIANSYAH, VAUZAN and Pratiwi, Diah Kusuma (2019) KAJIAN SIFAT MEKANIK MATERIAL REFRAKTORI CAMPURAN DENGAN 10 %, 20 %, 30 % KOMPOSISI BERAT ABU TERBANG BATU BARA (FLY ASH). Undergraduate thesis, Sriwijaya University.

AMALIYADI, DIDI TRI and Pratiwi, Diah Kusuma (2018) LAJU KOROSI HASIL PENGELASAN KOMBINASI BAJA ASTM A-36 YANG DI PREHEAT DAN PWHT MENGGUNAKAN AIR LIMBAH TPA DAN AIR SUNGAI MUSI. Undergraduate thesis, Sriwijaya University.

WAHYUNI, IWAN and Pratiwi, Diah Kusuma and Sipahutar, Riman (2018) ANALISA KERUSAKAN COATING CONCRETE PADA UNIT PENGOLAHAN AIR DI PEMBANGKIT LISTRIK TENAGA UAP. Master thesis, Sriwijaya University.

WAHYUNI, IWAN and Pratiwi, Diah Kusuma and Sipahutar, Riman (2018) ANALISA KERUSAKAN COATING CONCRETE PADA UNIT PENGOLAHAN AIR PEMBANGKIT LISTRIK TENAGA UAP. Master thesis, Sriwijaya University.

SAPUTRA, NOPAN and Pratiwi, Diah Kusuma (2018) ANALISIS SIFAT FISIK DAN MEKANIK PENGELASAN DISSIMILAR BAJA KARBON RENDAH DAN STAINLESS STEEL MENGGUNAKAN LAS GTAW. Undergraduate thesis, Sriwijaya University.

REDHO, ASRUL RASYID and Pratiwi, Diah Kusuma and Nurhabibah, Nurhabibah (2018) PENGARUH VARIASI TEKANAN UDARA PADA PELAPISAN BAJA DENGAN ALUMINIUM MENGGUNAKAN ELECTRIC ARC WIRE SPRAY TERHADAP LAJU KOROSI DALAM AIR RAWA DAN AIR SAMPAH. Undergraduate thesis, Sriwijaya University.

SUPARNO, AHMAD AKBAR and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) ANALISA PENGARUH PREHEAT DAN POST WELD HEAT TREATMENT PENGELASAN KOMBINASI GTAW-SMAW PADA BAJA KARBON RENDAH TERHADAP KARAKTERISTIK SIFAT MEKANIK DAN FISIK. Undergraduate thesis, Sriwijaya University.

PRATAMA, YANUAR PUTRA and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) PENGARUH HOT DIPPING BAJA KARBON SS400 DALAM TIMAH (Pb) TERHADAP LAJU KOROSI AIR LAUT. Undergraduate thesis, Sriwijaya University.

ARDINATA, ARIZON and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2018) PENGARUH HOT DIPPING BAJA SS400 DALAM Zn TERHADAP LAJU KOROSI DALAM AIR LAUT. Undergraduate thesis, Sriwijaya University.

SUKADI, SUKADI and Pratiwi, Diah Kusuma and Nukman, Nukman (2017) ANALISIS KERUSAKAN PIPA SUPERHEATER PADA BOILER MODEL TAKUMA N600 SA TERHADAP FOULING INDEX. Master thesis, Sriwijaya University.

LUBIS, RENDI RAHMATULLAH and Pratiwi, Diah Kusuma and Hadi, Qomarul (2017) ANALISA SIFAT MEKANIK SAMBUNGAN LAS SHIELD METAL ARC WELDING (SMAW) DENGAN VARIASI ARUS PADA BAJA A 516 Gr. 70 TEBAL PELAT 6 mm TANPA KAMPUH. Undergraduate thesis, Sriwijaya University.

YULIANTO, YULIANTO and Mohruni, Amrifan Saladin and Pratiwi, Diah Kusuma (2016) OPTIMASI PARAMETER PEMOTONGAN DAN PENGGUNAAN BRASS WIRE UNTUK PEMOTONGAN Ti-6Al-4V WIRE CUT DENGAN APLIKASI RESPONSE SURFACE METHODOLOGY (RSM). Master thesis, Sriwijaya University.

MANGKUNEGARA, ALIF TIAS and Pratiwi, Diah Kusuma (2016) PENGARUH BESAR ARUS PENGELASAN SMAW PADA BAJA KARBON MEDIUM TERHADAP TEGANGAN LENGKUNG. Undergraduate thesis, Sriwijaya University.

ZAKI, MUHAMMAD and Pratiwi, Diah Kusuma (2016) PENGARUH PENGELASAN SMAW DAN TIG TERHADAP SIFAT FISIK DAN MEKANIK PADA PIPA ALUMINIUM. Undergraduate thesis, Sriwijaya University.

WIJAYA, TRY and Pratiwi, Diah Kusuma (2016) PENGARUH PENGELASAN SMAW DAN TIG TERHADAP SIFAT FISIK DAN MEKANIK PADA PIPA STAINLESS STEEL. Undergraduate thesis, Sriwijaya University.

WIJAYA, TRY and Pratiwi, Diah Kusuma (2016) PENGARUH PENGELASAN SMAW DAN TIG TERHADAP SIFAT FISIK DAN MEKANIK PADA PIPA STAINLESS STEEL. Undergraduate thesis, Sriwijaya University.

SAPUTRA, FANHAR and Nukman, Nukman and Pratiwi, Diah Kusuma (2016) ANALISIS PENGARUH QUENCHING DAN TEMPERING BESERTA VARIASI WAKTU TAHAN DENGAN MEDIA PENDINGIN OLI MESRAN SAE 40 TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIK BAJA KARBON SEDANG. Undergraduate thesis, University of Sriwijaya.

LUBIS, EDWARD PROBONARDO and Pratiwi, Diah Kusuma (2016) PENGARUH VARIASI ARUS PENGELASAN SMAW TERHADAP PERUBAHAN SIFAT STRUKTUR MIKRO DAN KEKERASAN BAJA. Undergraduate thesis, Sriwijaya University.

AHMADIN, AHMADIN and Pratiwi, Diah Kusuma (2014) PENGARUH FRAKSI GARAM DALAM AIR PENDINGIN TERHADAP SIFAT BAJA KARBON RENDAH. Master thesis, Sriwijaya University.

NAFARI, ZAINI and Pratiwi, Diah Kusuma (2014) ANALISA KOROSI AIR RAWA DI DAERAH LASAN BAJA PADUAN RENDAH YANG TELAH DITEKUK. Undergraduate thesis, Sriwijaya University.

SAPUTRO, ARDIN WAHYU and Pratiwi, Diah Kusuma (2014) ANALISIS TEKNO SOSIO EKONOMI PENGGUNAAN BRIKET BATUBARA PADA SEKTOR INDUSTRI PENGECORAN LOGAM. Undergraduate thesis, Sriwijaya University.

SATRIA, FAISAL and Pratiwi, Diah Kusuma (2014) KAJIAN STRUKTUR MIKRO, KEKERASAN, DAN IMPAK PADA AL SEKRAP COR AS CAST. Undergraduate thesis, Sriwijaya University.

ENDSAN, SIMSON and Pratiwi, Diah Kusuma (2014) KAJIAN EKSPERIMENTAL PERBANDINGAN KUALITAS DAERAH SAMBUNGAN BRAZING DAN PATRI PADA BAJA DAN KUNINGAN. Undergraduate thesis, Sriwijaya University.

HIDAYAT, IMAM and Sipahutar, Riman and Pratiwi, Diah Kusuma (2014) KAJIAN ANALITIS PEMBAKARAN BRIKET BATUBARA UNTUK TUNGKU PENGECORAN LOGAM. Undergraduate thesis, Sriwijaya University.

RASYIDI, RASYIDI and Sahim, Kaprawi and Pratiwi, Diah Kusuma (2014) KAJIAN EKSPERIMEN BAJA KARBON MEDIUM YANG DILAS SMAW DAN DIKOROSIKAN DENGAN LARUTAN AIR LAUT. Master thesis, Sriwijaya University.

ERIZAL, ERIZAL and Pratiwi, Diah Kusuma (2014) KAJIAN EKSPERIMEN BAJA KARBON MEDIUM YANG DISAMBUNG DENGAN SMAW DI QUENCH DALAM LARUTAN AIR LAUT. Master thesis, Sriwijaya University.

SANJAYA, SANJAYA and Chandra, Hendri and Pratiwi, Diah Kusuma (2006) MODIFIKASI ALAT UJI TAK MERUSAK (NDT) TIPE SERBUK MAGNETIK JENIS YOKE. Undergraduate thesis, Sriwijaya University.

Teaching Resource

Pratiwi, Diah Kusuma (2019) RPS TEKNIK PENGECORAN LANJUT. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS DINAMIKA SISTEM. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS KOROSI DAN PENGENDALIANNYA. [Teaching Resource]

Pratiwi, Diah Kusuma (2019) RPS MATERIAL TEKNIK LANJUT. [Teaching Resource]

Pratiwi, Diah Kusuma and Chandra, Hendri and Mataram, Agung (2019) ANALISA KERUSAKAN MATERIAL. [Teaching Resource]

Other

Ojahan R, Tumpal and Chandra, Hendri and Pratiwi, Diah Kusuma (2023) Similarity of The Influence of Matrix Banana Stem Fiber Volume Fraction Recycled Polypropylene (RPP) Toward Bending Test. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma (2023) DPNA Analisa Kerusakan Material. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2023) Similarity of Teknologi Pengelasan Bagi Pengusaha Dan Pekerjaan Di Bidang Las Di Kecamatan Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) Absensi Matakuliah Teknologi Pengelasan Indralaya Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) Absensi Matakuliah Teknologi Pengelasan Indralaya palembang Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Chandra, Hendri and Pratiwi, Diah Kusuma (2023) DPNA Mekanika retak. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) DPNA Metalografi dan Difraksi Indralaya genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) DPNA Metalografi dan Difraksi Palembang genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) DPNA Teknologi pengelasan Indralaya genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Pratiwi, Diah Kusuma and Arifin, Amir and Utami, Nurhabibah Paramitha Eka (2023) DPNA Teknologi pengelasan Palembang genap 2022/2023 Jurusan Teknik Mesin FT Unsri. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma (2023) Daftar hadir Metalografi dan Difraksi kelas Palembang Genap 2022/2023. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Arifin, Amir and Gunawan, Gunawan and Pratiwi, Diah Kusuma (2023) Bukti Korespondensi_Investigation of Welding Parameters of Dissimilar Weld of SS316 and ASTM A36 Joint Using a Grey-Based Taguchi Optimization Approach. MDPI.

Nukman, Nukman and Saggaff, Anis and Nawawi, Zainudin and Basri, Hasan and Kaprawi, Kaprawi and Said, Muhammad and Mohruni, Amrifan Saladin and Stiawan, Deris and Sipahutar, Riman and Buchari, Erika and Ibrahim, Eddy and Nurmaini, Siti and Agustina, Tuty Emilia and Suprapto, Bhakti Yudho and fransiska, widya and Yani, Irsyadi and Mataram, Agung and Arifin, Amir and Yanis, Muhammad and Sidik, Muhammad Abu Bakar and Saloma, Saloma and ermatita, ermatita and Arita, Susila and Bahrin, David and Resti, Yulia and Jambak, Muhammad Irfan and abdiansyah, abdiansyah and Rini, Dian Palupi and kunang, Yesi Novaria and Tutuko, Bambang and firdaus, firdaus and Hartono, Yusuf and Yusuf, Maulana and Taqwa, Ridhah and Kadarsa, Edi and Agustien, Melawaty and Siswanto, Ari and Mohadi, Risfidian and Melwita, Elda and Nurjannah, Siti Aisyah and Aminuddin, K. M. and Pratiwi, Diah Kusuma and Pahendra, Iwan and Dwijayanti, Suci and Erwin, Erwin and Sukemi, Sukemi and Hariani, Poedji Loekitowati and ferdiansyah, ferdiansyah and Rahayu, Wiwik and Moerwanto, A. S. and antoni, darius and Komariah, Leily Nurul and Samsuryadi, Samsuryadi and Barlin, Barlin and muhamad, muhamad and Partan, Radiyati Umi and Sutriyono, Edy and Setiawan, Budhi and Hadinata, Febrian and Bustan, M. Djoni and Haryati, Sri and widhiarso, Wijang and safaatunnur, unnur and Dewi, Tresna and Handayani, Sri and Rosidawani, Rosidawani and Husni, Nyayu Latifah and Anugrah Putranto, Dinar Dwi and Setiawan, Herri and Nasir, Subriyer and Budianta, Dedik and ridwan, muhammad and Sofijan, Armin and Lim, Taih Cheng and Chandra, Hendri and Syahrom, Ardiyansyah and Badaruddin, Muhammad and Sharif, Safian and Roni, Kiagus Ahmad and putra, Syaofiansyah Jaya and Suryadi, Fransiscus Xaverius and krispantono, - and oktarina, Maya Ftri (2023) KEPUTUSAN DEKAN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA Nomor: 1136/UN9.FT/TU.SK/2023 Tentang BEBAN KERJA DOSEN PADA PROGRAM STUDI PROGRAM DOKTOR FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GANJIL TAHUN AKADEMIK 2023/2024. FT UNSRI S3. (Unpublished)

Nukman, Nukman and Zulkarnain, Zulkarnain and Saputra, Ade and Kaprawi, Kaprawi and Pratiwi, Diah Kusuma and Yanis, Muhammad and Puspitasari, Dewi and Thamrin, Ismail and Hadi, Qomarul and Alian, Helmy and Santoso, Dyos and Gustini, Gustini and SUNDARI, ELLA and yudo, eko and YULIANTO, YULIANTO and bahiuddin, irfan and Firdaus, Aneka and Utami, Nurhabibah Paramitha Eka and Marwani, Marwani and Astuti, Astuti and Ellyanie, Ellyanie and PRAKOSO, AKBAR TEGUH and Suprapto, Bhakti Yudho and Mohruni, Amrifan Saladin and Yani, Irsyadi and Arifin, Amir and Bizzy, Irwin and intang, ambo and Akhyar, Gusri and Irmawan, Irmawan and Hadinata, Febrian and Mardhi, Alim and Gunawan, Gunawan and Adanta, Dendy and Arifin, Fatahul and Homzah, Ozkar Firdausi (2023) SK Pengelola Jurnal Rekayasa Mesin UNSRI 2023. Jurusan Teknik Mesin Unsri.

Eka Utami, Nurhabibah Paramitha and Yusril Mahendra, Nanda and Akbar, Imam and Gunawan, Gunawan and Romli, Romli and Fatoni, Zulkarnain and Pratiwi, Diah Kusuma (2023) Similarity check of Material Selection And Mechanical Properties In Leaf Spring Application: A Review. FT. Unsri.

Arifin, Amir and Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Dwi, Purba and Gunawan, Gunawan (2021) Effect of fly ash as reinforcement on mechanical properties of aluminum scrap based hybrid composite (Similarity). Turnitin Universitas Sriwijaya, Selangor, Malaysia. (Submitted)

Pratiwi, Diah Kusuma (2021) Similarity_ANALISIS KERUSAKAN PADA BUSHING APRON FEEDER. JUrusan Teknik Mesin FT Unsri, Jurnal Rekaya Mesin.

Chandra, Hendri and Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2021) Similarity of Teknologi Las Bagi Usaha dan Pekerja di Bidang Las di Desa Gandus Palembang. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma (2021) Similarity_WEAR ANALYSIS OF VERTICAL COAL MILL PLATE. Turnitin Universitas Sriwijaya, Indonesian Journal of Engineering and Science.

Pratiwi, Diah Kusuma (2021) Similarity_WELDING ANALYSIS OF GRAY CAST IRON ASTM A48 CLASS 40 USING SMAW. Turnitin Universitas Sriwijaya, IJES.

Pratiwi, Diah Kusuma (2020) similarity_Analysis of Upgrading Process of South Sumatera Low-Rank Coal. IOP Publishing.

Pratiwi, Diah Kusuma (2020) Similarity_The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse, International Journal of Emerging Trends in Engineering Research.

Pratiwi, Diah Kusuma (2020) corresponding author_The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. awrse, International Journal of Emerging Trends in Engineering Research.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) Similarity_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse.

Utami, Nurhabibah Paramitha Eka and Pratiwi, Diah Kusuma and Nasution, Jimmy Desidawansyah (2020) The effect of the annealing process and mold variations on failure time of CuZncast alloy by dynamic load. WARSE.

Pratiwi, Diah Kusuma (2020) Corresponding_Authors_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. WARSE.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka and Nasution, Jimmy Desidawansyah (2020) Similarity The Effect of Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. warse, International Journal of Emerging Trends in Engineering Research.

Pratiwi, Diah Kusuma (2020) Similarity_The Effect of the Annealing Process and Mold Variations to Failure Time of CuznCast Alloy by Dynamic Load. WARSE.

Pratiwi, Diah Kusuma (2020) Bukti koresponding_Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Publishing.

Pratiwi, Diah Kusuma (2020) Similarity_Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine. IOP Publishing.

Sipahutar, Riman and Pratiwi, Diah Kusuma and Darmawi, Darmawi and Bizzy, Irwin and Hidayati, Baiti (2020) Analysis of Upgrading Process of South Sumatera Low Rank Coal(Similarity). IOP Publishing.

Pratiwi, Diah Kusuma (2020) Bukti_korespondensi_The Effect of Annealing Process and Mold Variations to Failure Time of CuZn Cast Alloy by Dynamic Load_Diah Kusuma Pratiwi. WARSE.

Sipahutar, Riman and Pratiwi, Diah Kusuma and Bizzy, Irwin and Hidayati, Baiti (2020) Development of liquid smoke production process as a latex coagulant by utilizing a refrigeration machine(Similarity). IOP Publishing.

AFRIANSYAH, AFRIANSYAH and Chandra, Hendri and Pratiwi, Diah Kusuma and Firdaus, Aneka (2020) SIMILARITY OF FATIGUE FAILURE ON DRILLING PIPE THREAD A CASE STUDY ON DRILL PIPE SS105. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma (2019) bukti koresponding_Analysis of Upgrading Process of South Sumatera Low Rank Coal. IOP Publishing.

Sipahutar, Riman and Pratiwi, Diah Kusuma and Arifin, Amir and Bizzy, Irwin (2019) The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier(Similarity). IOP Publishing.

Mgs, Halim and Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2019) Similarity of Sustainable Development of Lubricator to Optimization Process of Lubrication in Wire Rope Sling. Ithenticate Universitas sriwijaya. (Submitted)

Pratiwi, Diah Kusuma (2019) similarity_Optimization of Angular Distortion on Weld Joints Using Taguchi Approach. Turnitin Universitas Sriwijaya, Jurnal Kejuruteraan.

Pratiwi, Diah Kusuma (2018) Similarity_High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Elsevier's.

Pratiwi, Diah Kusuma (2018) Bukti Korespondensi_EFFECT OF FLY ASH AS REINFORCEMENT ON MECHANICAL PROPERTIES OF ALUMINUM SCRAP BASED HYBRID COMPOSITE. School of Engineering. Taylor’s University.

Pratiwi, Diah Kusuma (2018) Similarity_EFFECT OF FLY ASH AS REINFORCEMENTnON MECHANICAL PROPERTIES OF ALUMINUM SCRAP BASED HYBRID COMPOSITE. School of Engineering, Taylor’s University, Journal of Engineering Science and Technology (JESTEC).

Pratiwi, Diah Kusuma (2018) Similarity_Sustainable Development of Lubricator to Optimization Process of Lubrication in Wire Rope Sling. IOP Publishing.

Pratiwi, Diah Kusuma (2018) Similarity_The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier. IOP Publishing.

Pratiwi, Diah Kusuma (2018) bukti korespondensi_The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier. IOP Publishing.

Pratiwi, Diah Kusuma (2018) bukti koresponding_Optimization of Angular Distortion on Weld Joints Using Taguchi Approach. UKM PRESS.

Pratiwi, Diah Kusuma (2018) bukti koresponding_The Effect of Air Flow Rate and Ratio Between Coal and Coconut Shell on Heat Energy Produced in an Updraft Gasifier. IOP Publishing.

Pratiwi, Diah Kusuma (2018) bukti koresponsi_Sustainable Development of Lubricator to Optimization Process of Lubrication in Wire Rope Sling. IOP Publishing.

Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2018) Corresponding author of High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Helyon.

Pratiwi, Diah Kusuma (2018) Effect of Processing Parameters on Fabrication of Aluminum Matrix Composite (AMC) through Stir Casting Process. scientific press TSP, Journal of Mechanical Engineering Research and Developments.

Pratiwi, Diah Kusuma and Chandra, Hendri and Utami, Nurhabibah Paramitha Eka and Irawan, Okta and PURBA, ARMAN NATAL (2018) Similarity of Damage Analysis of Moldboard Plow. Ithenticate Universitas sriwijaya. (Submitted)

Chandra, Hendri and Pratiwi, Diah Kusuma and ZAHIR, MUHAMMAD (2018) Similarity of High-temperature quality of accelerated spheroidization on SUP9 leaf spring to enhance machinability. Ithenticate Universitas sriwijaya.

Bizzy, Irwin and Sipahutar, Riman and Mohruni, Amrifan Saladin and Kadir, M. Zahri and Marwani, Marwani and Pratiwi, Diah Kusuma (2017) ALAT PEMANGGANG TIPE KONTINYU MEMAKAI TEKNOLOGI INFRARED BURNER BERBAHAN BAKAR GAS (Similarity). Fakultas Teknik Universitas Sriwijaya, Palembang.

Pratiwi, Diah Kusuma (2017) Effect of ageing time 200 °C on microstructure behaviour of Al-Zn-Cu-Mg cast alloys. matec2017, sicst2016.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2017) Similarity Effect of ageing time 200 °C on microstructure behaviour of Al-Zn-Cu-Mg cast alloys. matec, sicest2016.

Pratiwi, Diah Kusuma (2016) Similarity_Effect of ageing time 200 °C on microstructure behaviour of Al-Zn-Cu-Mg cast alloys. Fakultas Teknik UNSRI.

Pratiwi, Diah Kusuma (2016) bukti korespondensi_Effect of ageing time 200 °C on microstructure behaviour of Al-Zn-Cu-Mg cast alloys. Fakultas Teknik UNSRI.

Pratiwi, Diah Kusuma and Utami, Nurhabibah Paramitha Eka (2016) ANALISA PERILAKU PATAH TARIK PADUAN Al-9Zn-5Cu-4Mg COR TERHADAP PERLAKUAN PANAS T5. Fakultas Teknik Universitas Sriwijaya.

Pratiwi, Diah Kusuma (2016) Similarity_Buku Briket Batubara Sebagai Bahan Bakar Pada Pengecoran Logam. unsri press.

Pratiwi, Diah Kusuma and Daud, Rochmawati and Alfitri, Alfitri (2016) Similarity_Buku Briket Batubara Sebagai Bahan Bakar Pada Pengecoran Logam. Unsri Press, Universitas Sriwijaya.

Pratiwi, Diah Kusuma (2016) THERMAL EVOLUTION PROFILE ANALYSIS FOR PYROLYSIS OF COAL–ACACIA MANGIUM WOOD BLENDS. Universitas Indonesia.

Pratiwi, Diah Kusuma (2014) PENGARUH PENGELASAN DENGAN NYALA API OKSI-ASETILEN TERHADAP SIFAT MEKANIK DAN STRUKTUR MIKRO PELAT LOGAM MUNTZ. ft unsri.