Items where Division is "03-Faculty of Engineering > 21201-Mechanical Engineering (S1)" and Year is 2022

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | E | F | G | H | I | K | M | N | O | P | R | S | T | W | Y | Z
Number of items: 155.

A

ABYAN, HANIF MUHAMMAD and Santoso, Dyos and Yanto, Joni (2022) ANALISIS EKSERGI PADA PENINGKATAN PERFORMANSI PLTP LUMUT BALAI DENGAN SIKLUS KOMBINASI SINGLE FLASH-BINARY. Undergraduate thesis, Sriwijaya University.

AKBAR, AMRUL and Arifin, Amir (2022) ANALISIS KEKUATAN SAMBUNGAN LAS SMAW (SHIELDED METAL ARC WELDING) BAJA KARBON RENDAH DENGN VARIASI ARUS YANG BERBEDA. Undergraduate thesis, Sriwijaya University.

AL-FAJRI, RACHMADI ZAKI and Puspitasari, Dewi (2022) PROSES PEMISAHAN FASE LIQUID-LIQUID DENGAN METODE INNAGE PADA TANGKI-03 DI KSO PERTAMINA EP-ENERGI TANJUNG TIGA PRABUMULIH. Undergraduate thesis, Sriwijaya University.

ALBAJILI, FARISAN KASYFI and Gunawan, Gunawan (2022) PENGEMBANGAN KERAMIK HIDROKSIAPATIT TERDOPING TEMBAGA 1, 1.5, DAN 2 MOL PADA SINTERING 1000℃, 1100℃, DAN 1200℃. Undergraduate thesis, Sriwijaya Univversity.

ALDI, AL FURQAN and Utami, Nurhabibah Paramitha Eka (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP MELALUI PERBEDAAN DIMENSI CETAKAN PASIR SEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

ALDI, RAHMAD and Vidian, Fajri (2022) ANALISIS ENERGI PROSES GASIFIKASI BIOMASSA. Undergraduate thesis, Sriwijaya University.

ALDIKA, ALDIKA and Nukman, Nukman (2022) PENGARUH PENAMBAHAN TIMAH PUTIH MURNI PADA CORAN ALUMINIUM MURNI TERHADAP ENERGI AKTIVASI DAN OKSIDASI. Undergraduate thesis, Sriwijaya University.

ALDIYANTO, BIMANTORO and Gunawan, Gunawan (2022) PENGARUH PERLAKUAN PANAS PADA PENGELASAN BAJA A36 TERHADAP KEKERASAN DAN KOROSI. Undergraduate thesis, Sriwijaya University.

ALFAJRI, IMAM and Santoso, Dyos and Yanto, Joni (2022) STUDI PERFORMANSI PLTP LUMUT BALAI PADA KONDISI OFF-DESIGN MENGGUNAKAN ANALISIS EKSERGI. Undergraduate thesis, Sriwijaya University.

ALFALAH, UNGGUL and Yanis, Muhammad and Budiman, Arie Yudh (2022) ANALISIS KEKASARAN PERMUKAAN DENGAN RESPONSE SURFACE METHODOLOGY PADA KONDISI PEMESINAN MENGGUNAKAN NANOFLUID AL2O3 DALAM SISTEM MINIMUM QUANTITY LUBRICATION. Undergraduate thesis, Sriwijaya University.

ALMAHESA, M. ANDRI ADITYA and Chandra, Hendri (2022) ANALISIS DISTRIBUSI TEGANGAN,REGANGAN DAN PERPINDAHAN PADA TANKI ATAP KERUCUT MENGGUNAKAN PERANGKAT LUNAK SOLIDWORKS 2020. Undergraduate thesis, Sriwijaya University.

ALRAKAZ, HADI and Arifin, Amir (2022) STUDI PENGARUH JENIS FLUIDA PADA PEMBUATAN KERAMIK HIDROKSIAPATIT MELALUI PROSES SINTERING DINGIN. Undergraduate thesis, Sriwijaya University.

ARIFIN, STEVEN DAVIN and Basri, Hasan (2022) INVESTIGASI SISTEM PEMANAS DAN PENDINGIN PADA MESIN EKSTRUDER TERHADAP KUALITAS FILAMEN POLYLACTIC ACID (PLA ). Undergraduate thesis, Sriwijaya University.

ARYANTO, DESTU and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYETHERSULFONE (PES) DENGAN PENCAMPURAN TIMAH DIOKSIDA (SnO2): KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

ATMAJA, WIRANDA SATRIA and Vidian, Fajri (2022) ANALISIS PEMBANGKIT TENAGA UAP BERBAHAN BAKAR GAS HASIL GASIFIKASI BATU BARA MENGGUNAKAN CYCLE TEMPO. Undergraduate thesis, Sriwijaya University.

AWALDI, KURNIAWAN and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN POLYVINYLIDENE FLUORIDE(PVDF) DENGAN PENCAMPURAN TIN(IV) DIOXIDE(SnO2) : KARAKTERISTIK, SIFAT MEKANIS, DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

Alfarisy, Muhammad and Mohruni, Amrifan Saladin (2022) PEMBUATAN DETAILED ENGINEERING DESIGN ROLLER DARI MILLING STATION DI PT. CINTA MANIS. Undergraduate thesis, Sriwijaya University.

Arifin, Amir and Gunawan, Gunawan and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Porous titanium alloy/hydroxyapatite composite using powder compaction route. Turnitin Universitas Sriwiajaya. (Submitted)

B

BAHARUDDIN, BAHARUDDIN and Yani, Irsyadi (2022) Peer Review of Implementation of Design and Development Tensile Testing Machine for Application in Soft Material. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

BAHI, MOHD RADEN and Sahim, Kaprawi (2022) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK SEGITIGA. Undergraduate thesis, Sriwijaya University.

BUTAR BUTAR, POLADO POWER and Chandra, Hendri (2022) KETAHANAN LELAH BESI COR NODULAR DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

Basri, Hasan and Thamrin, Ismail and Yani, Irsyadi (2022) Peer Review of Rancang Bangun Alat Pemecah Biji Jarak Konvensional Skala Rumah Tangga. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Basri, Hasan and Yani, Irsyadi (2022) Peer Review of Vibration analysis of rotary cement kiln using finite element method. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Basri, Hasan and Yani, Irsyadi and Thamrin, Ismail (2022) Peer Review - Rancang Bangun Alat Pemotong Kerupuk Kemplang Untuk Meningkatkan Produktifitas dan Efisiensi Produksi. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Bizzy, Irwin and Isnurhadi, Isnurhadi and Santoso, Budi (2022) Inovasi Teknologi untuk Meningkatkan Kinerja dan Kualitas Produk Usaha Mikro Kecil Menengah di Desa Ulak Kerbau Baru Kecamatan Tanjung Raja Kabupaten Ogan Ilir Provinsi Sumatera Selatan (Similarity). Turnitin Universitas Sriwijaya.

Bizzy, Irwin and Santoso, Budi and Zahri Kadir, Muhammad (2022) Teknologi Kolektor Surya Berlubang tanpa Kaca Transparan untuk Mengeringkan Daun Gaharu (Similarity). Turnitin Universitas Sriwijaya. (Submitted)

D

DARMAWAN, RACHMAT ARTICO and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM AA 6061 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

DARMAWAN, SANDY DWIKI and Thamrin, Ismail (2022) ANALISIS PENGARUH PENGGUNAAN SPOILER PADA MOBIL SEDAN XYZ DENGAN METODE COMPUTATIONAL FLUID DYNAMICS (CFD). Undergraduate thesis, Sriwijaya University.

Dahlan, Muhammad Hatta (2022) Similarity Pengolahan Limbah Karet Menggunakan Teknologi Membran Sintesa Polimer. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta (2022) Similarity Pengolahan Limbah Kertas Menjadi Pulp Sebagai Bahan Pengemas Produk Agroindustri. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and DARWIS, AHMAD (2022) (Similarity) Prototype Of Neo-Heat Exchanger From Exhaust Gas Motor Diesel. Turnitin Universitas Sriwijaya. (Submitted)

Dahlan, Muhammad Hatta and Pratama, Eric Junior and Odina, Mia (2022) Similarity Pengaruh Penggunaan Membran Keramik Berbasis Zeolit Dan Gypsum Terhadap Emisi Gas Co, Nox Kendaraan Bermotor. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi (2022) AHLI KOROSI DASAR. -, 1 (1). UNSRI PRESS, Palembang. ISBN 978-623-399-017-2

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR AJST UNTUK ARTIKEL BERJUDUL MAJOR CORRECTION FOR VESA-2 REGARDING THE METHOD OF FLOWING THE AIR FROM THE BOTTOM TO THE TOP. CREATIVE COMMON ATTRIBUTION CC BY. (Unpublished)

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR IJSRP UNTUK ARTIKEL IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. t. (Unpublished)

Darmawi, Darmawi (2022) BUKTI KOMUNIKASI DENGAN EDITOR IJSRP UNTUK ARTIKEL: ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG - INDONESIA. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) HASIL ITHENTICATE DARI ARTIKEL MAJOR CORRECTION FOR VESA-2 REGARDING THE MATHOD OF FLOWING THE AIR FROM THE BOTTOM TO THE TOP. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi (2022) HASIL REVIEW GABUNGAN BPK KUNCORO DAN BPK AGUSTINUS UNTUK ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG - INDONESIA. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) HASIL REVIEW GABUNGAN PAK KUNCORO DAN PAK AGUSTINUS UNTUK IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Hasil Ithenticate untuk artikel berjudul:The Influence of Crevice Gap To The Interface Potential of Aluminium 1100 And Medium Carbon Steel and Its Effect To The Corrosion Rate of Metals. Turnitin Universitas Sriwijaya. (Submitted)

Darmawi, Darmawi (2022) MAJOR CORRECTION FOR VESA-2 REGARDING THE METHOD OF FLOWING THE AIR FROM THE BOTTOM TO HE TOP. ASIAN JOURNAL OF SCIENCE AND TECHNOLOGY, 13 (10). pp. 12219-12222. ISSN 0976-3376

Darmawi, Darmawi (2022) Peer Review dari pak Kuncoro dan pak Agustinus atas buku yang berjudul: AHLI KOROSI DASAR. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Peer Review dari pak Kuncoro, pak Agustinus dan Turnitin dari atikel berjudul: Analysis of Liquid Smoke Production Process From Palm Shell With Integrated Pyrolysis Method. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Darmawi, Darmawi (2022) Penilaian Bpk Kuncoro dan Bpk Agustinus Untuk Artikel berjudul "UNDERSHOT FLOATING WATERWHEEL ......... Universitas Tarumanegara, -. (Unpublished)

Darmawi, Darmawi (2022) Penilaian Bpk Kuncoro dan Bpk Agustinus untuk THE INFLUENCE OF CREVICE GAP TO THE INTERFACE POTENTIAL..... -.

Darmawi, Darmawi (2022) Undershot Floating Waterwheel a Concept of Small Hydropower Energy Development for Rural Areas of Indonesia. Journal of Mechanical Engineering Research and Developments, 45 (2). 03-09. ISSN 1024-1752

Darmawi, Darmawi and Irwin Bizzy, Irwin and Ellyanie, Ellyanie and Jimmy D Nasution, Jimmy (2022) HASIL ITHENTICATE UNTUK ARTIKEL: IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. Fakultas Teknik Universitas Sriwijaya, New Delhi - India. (Unpublished)

Darmawi, Darmawi and Irwin Bizzy, Irwin and Ellyanie, Ellyanie and Jimmy D Nasution, Jimmy (2022) IMPROVING THE EFFICIENCY OF VESA-2 TO MAXIMIZE THE ENERGY UTILIZATION. International Journal of Scientific and Research Publication, 12 (10). pp. 174-181. ISSN 2250-3153

Darmawi, Darmawi and Riman Sipahutar, Riman and Irwin Bizzy, Irwin and Jimmy D Nasution, Jimmy (2022) ELECTRONIC ARM FOR VESA-2 REPLACING THE HUMAN HAND ROLE IN KEMPLANG ROASTING PROCESS IN PALEMBANG – INDONESIA. INTERNATIONAL JOURNAL OF DEVELOPMENT RESEARCH, 12 (09). pp. 59296-59299. ISSN 2230-9926

E

EDIKA, MICHAEL PRATAMA and Marwani, Marwani and Bizzy, Irwin (2022) PROSES PENGERINGAN DAUN GAHARU DENGAN METODE CFB MENGGUNAKAN THERMOELECTRIC COOLER. Undergraduate thesis, Sriwijaya University.

ERAWAN, BRIAN and Bizzy, Irwin (2022) KAJI EKSPRIMENTAL PENDINGIN UDARA MINI DENGAN THERMOELECTRIC COOLER (TEC). Undergraduate thesis, Sriwijaya University.

ERVEGA, FRANDIAZ AGUSTAN and Santoso, Dyos (2022) STUDI EKSPERIMENTAL TURBIN ANGIN SUMBU VERTIKAL DENGAN PRE-SWIRL AUGMENTED. Undergraduate thesis, Sriwijaya University.

F

FADILAH, ANAS and Sipahutar, Riman (2022) GASIFIKASI SISTEM UPDRAFT BIOMASSA TEMPURUNG KELAPA DAN SEKAM KAYU DENGAN VARIASI LAJU ALIRAN MASSA UDARA. Undergraduate thesis, Sriwijaya University.

FAHLUCKI, M. FARIZ and Yani, Irsyadi (2022) PERANCANGAN SISTEM KEMUDI DAN SISTEM TRANSMISI KENDARAAN PROTOTYPE SAMARATUNGGA EV. Undergraduate thesis, Sriwijaya University.

FAKHRUDIN, DONNY and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN DINAMOMETER PENGUKURAN GAYA TEKAN PADA MESIN GURDI. Undergraduate thesis, Sriwijaya University.

FALAH, AFIF and Arifin, Amir (2022) PENGARUH TEMPERATUR SINTERING PADA KERAMIK HIDROKSIAPATIT TERDOPING TEMBAGA 1, 1.5, DAN 2 MOL. Undergraduate thesis, Sriwijaya University.

FAZAL, MUHAMMAD RAFLI and Mataram, Agung (2022) PENGARUH TEMPERATUR POST CURING TERHADAP KEKUATAN IMPAK KOMPOSIT POLYESTER - SERAT SABUT KELAPA. Undergraduate thesis, Sriwijaya University.

FEBRYANTO, BAMBANG and Gunawan, Gunawan (2022) STUDI PENGARUH TEMPERATUR KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PLA. Undergraduate thesis, Sriwijaya University.

FERNANDES, ALFIAN LUIS and Chandra, Hendri (2022) KETAHANAN LELAH BAJA KONSTRUKSI PEGAS DAUN DENGAN PEMBEBANAN REPEATED TORSION. Undergraduate thesis, Sriwijaya University.

G

GERALDO, MUHAMMAD RAFAEL and Bizzy, Irwin (2022) DESAIN KEBUTUHAN PANEL PV MONOCRYSTALLINE 100WP UNTUK RUMAH SEDERHANA. Undergraduate thesis, Sriwijaya University.

H

H.S, Jhonprimen and Turnip, Andreas and Dahlan, Muhammad Hatta (2022) Similarity Pengaruh Massa Ragi, Jenis Ragi dan Waktu Fermentasi pada Bioetanol Biji Durian. Turnitin Universitas Sriwijaya. (Submitted)

HABIBURAHMAN, JA’FAR and Pratiwi, Diah Kusuma (2022) KARAKTERISTIK PRODUK COR ALUMINIUM SKRAP BERDASARKAN PERBEDAAN DIMENSI CETAKAN LOGAM PERSEGI EMPAT TERBUKA. Undergraduate thesis, Sriwijaya University.

HAFIDZ, M DZAKY and Chandra, Hendri (2022) KARAKTERISTIK PATAH DAN KETAHANAN LELAH BESI COR MALLEABLE. Undergraduate thesis, Sriwijaya University.

HAMDANI, RIZKI and Barlin, Barlin (2022) PENGARUH RASIO MASSA KATALIS DAN SAMPAH PLASTIK TERHADAP KARAKTERISTIK MINYAK HASIL PIROLISIS. Undergraduate thesis, Sriwijaya University.

HAMZAH, AHMAD and Zulkarnain, Zulkarnain (2022) PENGEMBANGAN PENGUNCI PINTU OTOMATIS BERBASIS JARAK DAN SUHU MENGGUNAKAN ARDUINO. Undergraduate thesis, Sriwijaya University.

HARDIYANTO, DWIKI and Hadi, Qomarul (2022) PENGARUH VARIASI BEBAN KOMPAKSI PADA PEMBUATAN KOMPOSIT MATRIK KERAMIK CaCO3/FLY-ASH TERHADAP DENSITAS DAN KEAUSAN. Undergraduate thesis, Sriwijaya University.

HASAN, WIRATAMA and Mataram, Agung (2022) PEMBENTUKAN MEMBRAN TIMAH DIOKSIDA (SnO2) DENGAN PENCAMPURAN POLYETHERSULFONE (PES): KARAKTERISTIK, SIFAT MEKANIS DAN KINERJA PENGOLAHAN AIR. Undergraduate thesis, Sriwijaya University.

HIDAYAT, MUHAMMAD TAUFIK and Bizzy, Irwin (2022) KAJI EKSPERIMENTAL KOTAK PENDINGIN DENGAN THERMOELECTRIC COOLER VARIASI KECEPATAN ALIRAN AIR. Undergraduate thesis, Sriwijaya University.

HIDAYATULLAH, ANDRE BRILIAN and Adanta, Dendy (2022) ANALISIS PENDEKATAN SEGITIGA KECEPATAN DAN PENGUJIAN EKSPERIMENTAL TURBIN TURGO SKALA PIKO. Undergraduate thesis, Sriwijaya University.

HUTAPEA, FELIX THEO YUSAMA and Puspitasari, Dewi (2022) KAJI EKSPERIMENTAL PENGARUH UKURAN PARTIKEL TERHADAP EFISIENSI PEMISAHAN DUAL CYCLONE SEPARATOR. Undergraduate thesis, Sriwijaya University.

Handayani, Ade SIlvia and Nurmaini, Siti and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Brief Review on Formation Control of Swarm Robot. Turnitin Universitas Sriwijaya.

Handayani, Ade Silvia and Husni, Nyayu Latifah and Nurmaini, Siti and Yani, Irsyadi (2022) Peer Review of Formation Control Design for Real Swarm Robot Using Fuzzy Logic. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Hidayati, Baiti and Sipahutar, Riman and Bizzy, Irwin and Faizal, Muhammad (2022) INCREASED PRODUCTIVITY OF LIQUID SMOKE THROUGH FAST THAWING WITH REFRIGERATION SYSTEMS AT LOW AIR TEMPERATURES. Journal of Applied Engineering Science, 20 (1). pp. 79-84. ISSN 1451-4117

Husni, Nyayu Latifah and Handayani, Ade Silvia and Nurmaini, Siti and Yani, Irsyadi (2022) Peer Review Cooperative Searching Strategy for Swarm Robot. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

I

ICHSAN, MUHAMMAD RYANDI and Zulkarnain, Zulkarnain (2022) PERANCANGAN MOBILE ROBOT PEMADAM KEBAKARAN OTOMATIS PENJEJAKAN LINTASAN DENGAN MENGGUNAKAN METODE DEAD RECKONING. Undergraduate thesis, Sriwijaya University.

ILAHI, AHMAD FAUZI and Vidian, Fajri (2022) ANALISIS EKSERGI PADA GASIFIKASI BIOMASSA. Undergraduate thesis, Sriwijaya University.

IRHAM, MUHAMMAD RIDHO and Mohruni, Amrifan Saladin (2022) PENGAPLIKASIAN COMPUTER INTEGRATED MANUFACTURING DALAM PENGELOLAAN SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS), STUDI KASUS : REGISTRASI INVENTARIS BUKU PADA RUANG BACA JURUSAN YANG TERDAPAT PADA FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

Irsyadi, Yani (2022) Corresponding Autho: Automatic Identification of Plastic Waste by HSV Colour. Science and Technology Indonesia. (Unpublished)

Irsyadi, Yani (2022) Peer Review: Analysis of a cans waste classification system based on the CMYK color model using different metric distances on the k�means method. Fakultas Teknik Universitas Sriwijaya.

Irsyadi, Yani (2022) Peer Review: Automatic Identification of Plastic Waste by HSV Colour. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Irsyadi, Yani (2022) Peer Review: The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Irsyadi, Yani (2022) Peer review: Failure analysis of AISI 304 stainless steel pipeline transmission a petrochemical plant. Fakultas Teknik Universitas Sriwijaya.

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: Analysis of a cans waste classification system based on the CMYK color model using different metric distances on the k-means method. Turnitin Universitas Sriwijaya. (Submitted)

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: Automatic Identification of Plastic Waste by HSV Colour. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: Failure analysis of AISI 304 stainless steel pipeline transmission a petrochemical plant. Turnitin Universitas Sriwijaya.

Irsyadi, Yani (2022) Plagiarism and Similarity Checker: The Effect Of Adding Used Lubricant On Used Aluminum Beverage Cans Castings On The Hardness Value. Turnitin Universitas Sriwijaya. (Submitted)

Irsyadi, Yani (2022) peer review; A comparison of degradation rate bone scaffold morphology between computer simulation and experimental approach. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

K

KAMIL, MUHAMMAD IHSAN and Mohruni, Amrifan Saladin (2022) PEMBUATAN PROTOTIPE DATABASE INVENTORI STUDI KASUS DI PERPUSTAKAAN BERDASARKAN TEKNOLOGI RADIO FREQUENCY IDENTIFICATION. Undergraduate thesis, Sriwijaya University.

M

MANDALIKA, ADE MAHFUZH and Zulkarnain, Zulkarnain (2022) RANCANG BANGUN MOBILE ROBOT PENDETEKSI WARNA, SUHU DAN GAMBAR DENGAN PENGENDALI BLUETOOTH. Undergraduate thesis, Sriwijaya University.

MANDIANGAN, SAMUEL CAESARIO and Yanis, Muhammad (2022) ANALISIS GETARAN PEMESINAN FRAIS DAN PENGUJIAN WIRELESS ACCELEROMETER SENSOR DENGAN ARDUINO-ESP32. Undergraduate thesis, Sriwijaya University.

MERDEKA, ALBERTUS PUTRA and Puspitasari, Dewi (2022) STUDI PENGARUH TEMPERATUR TERHADAP KARAKTERISTIK BAHAN BAKAR MINYAK HASIL PIROLISIS GABUNGAN SAMPAH PLASTIK JENIS POLYSTYRENE (PS) DAN LOW-DENSITY POLYETHYLENE (LDPE). Undergraduate thesis, Sriwijaya University.

Marhaini, Marhaini and Faizal, Muhammad and Dahlan, Muhammad Hatta and Marsi, Marsi and Arinafril, Arinafril (2022) Similiarity Bioremediasi Air Limbah Pabrik Pupuk Urea oleh Bakteri Pseudomonas fluorescen. Turnitin Universitas Sriwijaya. (Submitted)

Mohruni, Amrifan Saladin (2022) Attendance for the course: 2122-02-TKM241514 GETARAN MEKANIK (VIBRATION MECHANICS) Semester Genap 2021-2022. Mechanical Engineering Department.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNTVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA PROGRAM STUDI MAGISTER TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022 0075/UN9.FT/TU.SK/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Peer Review_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Similarity_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Turnitin Universitas Sriwijaya. (Submitted)

Mohruni, Amrifan Saladin and Yanis, Muhammad and Yuliwati, Erna and Sharif, Safian and Yani, Irsyadi and Ismail, Ahmad Fauzi and GUPTA, SANDRA (2022) Peer Review of Green Machining of Thin-Wall Titanium Alloy. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

N

NEGARA, RENALDI TRI KUSUMA and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN MANAGEMENT INVENTORY DATABASE MENGGUNAKAN APLIKASI SENAYAN LIBRARY MANAGEMENT SYSTEM (SLiMS) DENGAN STUDI KASUS REGISTRASI INVENTARIS BUKU PADA RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA MENGGUNAKAN METODE COMPUTER INTEGRATED MANUFACTURING. Undergraduate thesis, Sriwijaya University.

NURQOSIM, MALIK and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN DAN PENERAPAN APLIKASI DATABASE BERBASIS SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS) MENGGUNAKAN TEORI COMPUTER INTEGRATED MANUFACTURING (CIM) DI RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Peer Review of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwijaya. (Submitted)

Nukman, Nukman and Mataram, Agung and Yani, Irsyadi (2022) Plagiarism and Similarity Checker of Peleburan Skrap Aluminium pada Tungku Krusibel berbahan Bakar Batubara Hasil Proses Aglomerasi Air-Minyak Sawit. Turnitin Universitas Sriwiajaya. (Submitted)

Nukman, Nukman and Surya, Indra and Liantara, Rizki and Yani, Irsyadi and Arifin, Amir (2022) TGA / DTA Analysis for AA6061 with Fine Coal Blend. In: Sriwijaya International Conference on Engineering and Technology 2021 (SICETO 2021), 25-26 October 2021, Palembang. (In Press)

Nukman, Nukman and Yani, Irsyadi and MS, Firdaus (2022) Peer Review of Engine optimization grate multipurpose analysis method with quality function deployment. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

O

OKTAVIANI, SEPTA and Arifin, Amir (2022) STUDI PENGARUH TEKANAN KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PVA. Undergraduate thesis, Sriwijaya University.

P

PAMUNGKAS, MAULANA BUANA and Zulkarnain, Zulkarnain (2022) PENERAPAN SENSOR ULTRASONIC SEBAGAI PENGHINDAR HALANGAN PADA PERANCANGAN ROBOT PEMADAM KEBAKARAN OTOMATIS. Undergraduate thesis, Sriwijaya University.

PEBRINALDI, ARIF and Zulkarnain, Zulkarnain (2022) PENGEMBANGAN MOBIL ROBOT LINE FOLLOWER BERBASIS ARDUINO UNO. Undergraduate thesis, Sriwijaya University.

PRADANA, ALDYS MEICHAL and Mohruni, Amrifan Saladin and Saputra, Ade (2022) PENGEMBANGAN SISTEM INVENTORY MANAGEMENT RUANG BACA DENGAN METODE COMPUTER INTEGRATED MANUFACTURING (CIM) DI FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

PRAMANA, ANGGA SAPTO and Zulkarnain, Zulkarnain (2022) ANALISIS ROBOT PEMADAM KEBAKARAN OTOMATIS MENGGUNAKAN SENSOR PANAS, ALARM DAN KIPAS PEMADAM. Undergraduate thesis, Sriwijaya Unviersity.

PRAMANA, ROY and Abidin, Zainal (2022) ANALISIS DISTRIBUSI TEGANGAN REGANGAN DAN PERPINDAHAN PADA BEJANA TEKAN LPG KAPASITAS 3 KG DENGAN BANTUAN SOFTWARE 2020. Undergraduate thesis, Sriwijaya University.

PRANATAMA, ASYQAR and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN BERBASIS STRAIN GAUGE IMPULSE HAMMER UNTUK ANALISIS PARAMETER DINAMIK. Undergraduate thesis, Sriwijaya University.

PRATAMA, RANDI and Basri, Hasan (2022) RANCANG BANGUN SINGLE SCREW EKSTRUDER DAN ANALISIS PENGARUH KECEPATAN SCREW TERHADAP AKURASI DIMENSI FILAMEN POLYLACTIC ACID. Undergraduate thesis, Sriwijijaya University.

PRATAMA, RIZAL ADI and Marwani, Marwani (2022) KAJIAN EKSPERIMENTAL KINERJA PYROLISYS REAKTOR PLASTIC MENJADI MINYAK CAIR DENGAN PROSES PIROLISIS CEPAT. Undergraduate thesis, Sriwijaya University.

PRATAMA H, M. YOGA and Marwani, Marwani (2022) PENGARUH TEMPERATUR DAN WAKTU PEMANASAN TERHADAP SAMPAH PLASTIK LDPE (LOW DENSITY POLYETHYLINE). Undergraduate thesis, Sriwijaya University.

PRIYAMBODO, RYAS AKBAR and Sipahutar, Riman (2022) ANALISIS MASSA GAS PADA PROSES GASIFIKASI BATUBARA DAN SEKAM KAYU DENGAN VARIASI LAJU ALIRAN MASSA UDARA DAN UKURAN. Undergraduate thesis, Sriwijaya university.

R

RAHMADDIN, MUHAMMAD ANDI and Marwani, Marwani (2022) ANALISIS PERFORMANSI TURBIN HIDRO PICO PIPA AIR TERHADAP PERUBAHAN DEBIT AIR. Undergraduate thesis, Sriwijaya University.

RAMADHAN, DWIKI and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN ALUMINIUM OKSIDA. Undergraduate thesis, Sriwijaya University.

RAMADHAN, MUHAMMAD FADLY and Abidin, Zainal (2022) ANALISIS DISTRIBUSI TEGANGAN, REGANGAN, DAN PERPINDAHAN PROSTESIS DISKUS INTERVERTEBRALIS PADA POSISI FLEKSI. Undergraduate thesis, Sriwijaya University.

RAMADHAN, RAHMAT and Hadi, Qomarul (2022) PENGARUH UNSUR PENCAMPUR PADA PEMBUATAN MATERIAL KOMPOSIT BERPENGUAT FLY ASH TERHADAP DENSITAS DAN KEAUSAN. Undergraduate thesis, Sriwijaya University.

RIFQY, MUHAMMAD ABIL and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN TITANIUM DIOKSIDA. Undergraduate thesis, Sriwijaya University.

RINALDI, FARRAS and Yanis, Muhammad (2022) PERANCANGAN DAN PEMBUATAN IMPULSE HAMMER DENGAN TRANSDUSER GAYA BERBASIS STRAIN GAUGE UNTUK BENDA UJI BERDIMENSI KECIL. Undergraduate thesis, Sriwijaya University.

RIVALDI, M IKHSAN and Bizzy, Irwin (2022) STUDI EKSPERIMENTAL KOTAK PENDINGIN DENGAN THERMOELECTRIC COOLER (TEC). Undergraduate thesis, Sriwijaya University.

RUSNADI, ILHAM BINTANG and Sipahutar, Riman (2022) PENERAPAN MOTOR LISTRIK BRUSHLESS DIRECT CURRENT HUB PADA MOTOR BAKAR KONVENSIONAL. Undergraduate thesis, Sriwijaya University.

Resti, Yulia and Mohruni, Amrifan Saladin and Burlian, Firmansyah and Irsyadi, Yani (2022) Similarity_A probability approach in cans identification. Turnitin Universitas Sriwiajaya. (Submitted)

S

SIREGAR, HARIMAN and Marwani, Marwani (2022) ANALISIS EKSERGI SISTEM PEMBANGKIT LISTRIK TENAGA UAP DI PT PLN (PERSERO) UNIT PLTGU INDRALAYA SUMATERA SELATAN. Undergraduate thesis, Sriwijaya University.

SUITO, PANGKI and Nukman, Nukman (2022) PENGARUH PERLAKUAN PANAS T6 PADA ALUMUNIUM PADUAN 7075 TERHADAP KETAHANAN LELAH MATERIAL. Undergraduate thesis, Sriwijaya University.

SYAUKANI, MUHAMMAD MAULVY and Yanis, Muhammad (2022) ANALISIS PENGARUH PENGGUNAAN NANO-CUTTING FLUID PADA PROSES FREIS TERHADAP KEKASARAN PERMUKAAN MENGGUNAKAN METODE TAGUCHI. Undergraduate thesis, Sriwijaya University.

Sipahutar, Riman and Bizzy, Irwin and Faizal, Muhammad and Maussa, Olistiyo (2022) Bio-coal briquettes made from South Sumatera low rank coal and palm shell charcoal for using in small industries (Similarity). Turnitin Universitas Sriwijaya. (Submitted)

T

TARIGAN, RITCHI EPHIPANIAS and Puspitasari, Dewi (2022) STUDI EKSPERIMENTAL VARIASI SAMPEL UJI TERHADAP EFISIENSI PENYARINGAN UDARA MENGGUNAKAN DUAL CYCLONE SEPARATOR. Undergraduate thesis, Sriwijaya University.

TINAMBUNAN, MUHAMMAD REZA and Barlin, Barlin (2022) KARAKTERISASI NANOFLUIDA BERBASIS MINYAK KELAPA MURNI DAN MULTI WALL CARBON NANO TUBE. Undergraduate thesis, Sriwijaya University.

TRIFARIZY, MUHAMAD DAVID and Marwani, Marwani (2022) EFEK TEMPERATUR TERHADAP PROPERTIES MINYAK HASIL PROSES PIROLISIS MENGGUNAKAN SAMPAH PLASTIK HYBRID JENIS HIGH-DENSITY POLYETHYLENE (HDPE) DAN POLYPROPYLENE (PP). Undergraduate thesis, Sriwijaya University.

W

WAHID, ABDURRAHMAN and Thamrin, Ismail (2022) STUDI PENGARUH VARIASI PERBANDINGAN COOLANT-WATER TERHADAP EFEKTIVITAS RADIATOR. Undergraduate thesis, Sriwijaya University.

WAHID, FEBRI ABDUL and Barlin, Barlin (2022) STUDI PENGARUH TEMPERATUR PIROLISIS SAMPAH PLASTIK TERHADAP KARAKTERISTIK BAHAN BAKAR MINYAK YANG DIHASILKAN. Undergraduate thesis, Sriwijaya University.

WAHYUDI, DICKY and Yani, Irsyadi (2022) PENGEMBANGAN MOBIL ROBOT PEMADAM API BERBASIS MIKROKONTROLER ARDUINO UNO. Undergraduate thesis, Sriwijaya University.

WIDAD, MUHAMMAD and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY DIE CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

WIJAYANTO, ILHAM GUSTI and Arifin, Amir (2022) STUDI PENGARUH TEMPERATUR KOMPAKSI PADA PEMBUATAN KOMPOSIT HA/PVA. Undergraduate thesis, Sriwijaya University.

Y

YAHYA, M ALDI and Thamrin, Ismail (2022) ANALISS PENGARUH JUMLAH FAN BLADE DENGAN VARIASI CAIRAN PENDINGIN TERHADAP EFEKTIFITAS RADIATOR. Undergraduate thesis, Sriwijaya University.

YESA, DANEL REKA and Sahim, Kaprawi (2022) STUDI EKSPERIMENTAL PERPINDAHAN PANAS SECARA KONVEKSI PAKSA PADA PIPA TEMBAGA BERBENTUK PERSEGI EMPAT. Undergraduate thesis, Sriwijaya University.

Yani, Irsyadi and Arifin, Amir and ZAHIR, MUHAMMAD (2022) Plagiarism and Similarity Checker of Design Optimization in Stress Distribution of Firing Pin Rifle by Impact Force Using Finite Element Modelling. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Basri, Hasan (2022) Peer Review Oil Flow in Two Axial Groove Journal Bearing. Fakultas Teknik Universitas Sriwijaya.

Yani, Irsyadi and Budiman, Anton Indra (2022) Peer Review of Development of Identification System of cans And Bottle. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Budiman, Anton Indra (2022) Plagiarism and Similarity Checker of Development of Identification System of cans And Bottle. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Nurmaini, Siti (2022) Peer Review of Target Tracking in Mobile Robot under Uncertain Environment using Fuzzy Logic Controller. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Peer Review of Odor Classification Using Support Vector Machine. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Peer Review of Swarm Intelligent in Bio-Inspired Perspective: A Summary. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Peer review_Odor Localization Sub Tasks: A Survey. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Odor Classification Using Support Vector Machine. Turnitin Universitas Sriwiajaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Target Tracking in Mobile Robot under Uncertain Environment using Fuzzy Logic Controller. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Odor Localization Sub Tasks: A Survey. Turnitin Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Nurmaini, Siti (2022) Plagiarism and Similarity Checker of Swarm Intelligent in Bio-Inspired Perspective: A Summary. Turnitin Universitas Sriwiajaya. (Submitted)

Yani, Irsyadi and Resti, Yulia and Burlian, Firmansyah (2022) Peer Review of Identification of Bearing Failure Using Signal Vibrations. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Resti, Yulia and Burlian, Firmansyah (2022) Peer Review of Identification of Bearing Failure Using Signal Vibrations. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Yani, Irsyadi and Resti, Yulia and Burlian, Firmansyah (2022) Plagiarism and Similarity Checker of Identification of bearing failure using signal vibrations. Turnitin Universitas Sriwiajaya. (Submitted)

Z

ZHAFRAN, WIRA and Pratiwi, Diah Kusuma (2022) SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY SAND CASTING MENGGUNAKAN ESI PROCAST. Undergraduate thesis, Sriwijaya University.

This list was generated on Tue Nov 29 07:57:54 2022 WIB.