Items where Author is "Mohruni, Amrifan Saladin"

Group by: Item Type | No Grouping

Number of items: 243.

Article

Mohruni, Amrifan Saladin and Saputra, Chnadra Eko and MANGKUNEGARA, NOORDIN AS-SHIDDIQ (2023) Agile response of pandemic COVID 19 in Universitas Sriwijaya by implementing the learning management system (LMS) combined with web conferencing BigBlueButton. International Conference on Engineering and Technology 2021 (SICETO 2021), 2689 (2689). ISSN 1551-7616

Lotfi, Mohammad and Farid, Ali Akhavan and Akbari, Javad and Sharif, Safian and Mohruni, Amrifan Saladin (2022) TPAK_Evaluation of surface integrity when drilling Inconel 718 through experimental measurement and finite element analysis. International Journal of Advanced Manufacturing Technology, 119. pp. 4237-4248. ISSN 14333015

BUDIMAN, ARIE YUDHA and Mohruni, Amrifan Saladin and Sharif, Safian and Firdaus, Aneka (2021) The Influence of Machining Parameters using Cryogenic Cooling System. AIP Conference Proceedings, 2338 (030006). pp. 1-7. ISSN 0094243X, 15517616

Adanta, Dendy and Sahim, Kaprawi and Mohruni, Amrifan Saladin (2021) TPAK_Feasibility Study of PVC Pipes as Vertical Axis Wind Turbines Type Savonius Bucket for Remote Areas Application. International Journal on Energy Conversion (IRECON), 9 (2). pp. 41-47. ISSN 25332910

Bizzy, Irwin and Yanis, Muhammad and Mohruni, Amrifan Saladin and Firdaus, Aneka and Abrar, A. (2020) MESIN PENCACAH PAKAN HIJAUAN TERNAK UNTUK KELOMPOK PETERNAK SAPI DI TALANG KEPUH KELURAHAN GANDUS KECAMATAN GANDUS KOTA PALEMBANG. Seminar Nasional AVoER. pp. 780-783. ISSN 978-979-19072-6-2

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi and ZAHIR, MUHAMMAD (2020) Experimental Vibration Study in Milling Thin-Walled Ti6Al4V under MQL using Coconut Oil as Cutting Fluid. Journal of Physics: Conference Series, 1500 (012034). pp. 1-8. ISSN 1742-6596

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) OPTIMUM PERFORMANCE OF GREEN MACHINING ON THIN WALLED TI6AL4V USING RSM AND ANN IN TERMS OF CUTTING FORCE AND SURFACE ROUGHNESS. Jurnal Teknologi, 81 (6). pp. 51-60. ISSN 0127-9696

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi and Arifin, Amir (2019) Application of RSM and ANN in Predicting Surface Roughness for Side Milling Process under Environmentally Friendly Cutting Fluid. Journal of Physics: Conference Series, 1198 (042016). pp. 1-8. ISSN 1742-6596

Mohruni, Amrifan Saladin and ZAHIR, MUHAMMAD and Yanis, Muhammad and Sharif, Safian and Yani, Irsyadi (2019) Investigation of Finite Element Modelling on Thin-Walled Machining of Ti6Al4V using DEFORM-3D. Journal of Physics: Conference Series, 1167. 012002. ISSN 1742-6588

Zaharuddin, M F A and Yunos, P A A and Jiyoung, Y and Mohruni, Amrifan Saladin and Yani, Irsyadi and Yanis, Muhammad (2019) Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. Journal of Physics: Conference Series, 1198 (4). pp. 1-10. ISSN 17426588, 17426596

Resti, Yulia and Mohruni, Amrifan Saladin and Rosdiana, T and Zayanti, D.A. (2019) Study in Development of Cans Waste Classification System Based on Statistical Approaches. Journal of Physics: Conference Series, 1198 (9). pp. 1-6. ISSN 17426588, 17426596

Oktarini, Devie and Mohruni, Amrifan Saladin and Sharif, Safian and Yanis, Muhammad and Madagaskar, Madagaskar (2019) Optimum Milling Parameters of Sugarcane Juice Production Using Artificial Neural Networks (ANN). Journal of Physics: Conf. Series, 1167 (1). pp. 1-11. ISSN 17426588, 17426596

Bizzy, Irwin and Sipahutar, Riman and Mohruni, Amrifan Saladin and Kadir, M. Zahri and Marwani, Marwani and Pratiwi, Diah Kusuma (2017) ALAT PEMANGGANG TIPE KONTINYU MEMAKAI TEKNOLOGI INFRARED BURNER BERBAHAN BAKAR GAS. Seminar Nasional AVoER. pp. 615-618. ISSN 978-979-19072-6-2

Mohruni, Amrifan Saladin and Yanis, Muhammad and SUNDARI, ELLA and BUDIMAN, ARIE YUDHA and MARTOMI, EKA SATRIA (2015) Mathematical Modelling of Surface Roughness on Tropical Wood Machining Using Response Surface Methodology. APPLIED MECHANICS AND MATERIALS JOURNALS, 815. pp. 313-317. ISSN 1662-7482

Mohruni, Amrifan Saladin and Yuliwati, Erna and MUHROBIN, REDY KHOLIF (2015) Optimasi Kondisi Pemesinan untuk Kekasaran Permukaan pada Proses Slot Milling Baja Tahan Karat AISI 304. Jurnal Energi dan Manufaktur, 8 (1). pp. 1-8. ISSN 2541-5328

Mataram, Agung and Ismail, Ahmad Fauzi and Mohruni, Amrifan Saladin and Matsuura, T. (2014) An Investigation Effects of Electrospinning Parameters: Process Optimization By Application of Response Surface Methodology. Applied Mechanics and Materials, 660. pp. 140-144. ISSN 1660 9336

Yuliwati, Erna and Mohruni, Amrifan Saladin (2014) Membrane Processing of Refined Palm Oil Wastewater using TiO2 EntrappedNanoporous PVDFMembrane. Applied Mechanics and Materials, 548. pp. 16-20. ISSN 1660 9336

Mohruni, Amrifan Saladin and KEMBAREN, BILLY HIZKYA (2013) PENGARUH VARIASI KECEPATAN DAN KUAT ARUS TERHADAP KEKERASAN, TEGANGAN TARIK, STRUKTUR MIKRO BAJA KARBON RENDAH DENGAN ELEKTRODA E6013. Jurnal Rekayasa Mesin, 13 (1). pp. 1-8. ISSN 1411-6553

Book Section

Mohruni, Amrifan Saladin and Yanis, Muhammad and Yuliwati, Erna and Sharif, Safian and Ismail, Ahmad Fauzi and Yani, Irsyadi (2019) Green Machining of Thin-Wall Titanium Alloy. In: Innovations in Manufacturing for Sustainability. Materials Forming, Machining and Tribology, - (-). Springer Nature Switzerland AG. Part of Springer Nature 2019, Switzerland, pp. 147-168. ISBN 978-3-030-03276-0

Sharif, Safian and Mohruni, Amrifan Saladin and Jawahir, Ashraf (2008) Face Milling of Titanium Alloy Ti-6246 Using PVD-TiN Coated Carbide Tools. In: Face Milling of Titanium Alloy Ti-6246 Using PVD-TiN Coated Carbide Tools. PENERBIT UNIVERSITI TEKNOLOGI MALAYSIA, Johor Bahru, pp. 203-219. ISBN 978-983-52-0551-4

Monograph

Yanis, Muhammad and Mohruni, Amrifan Saladin and Yuliasari, Nova (2023) LAPORAN AKHIR PENELITIAN UNGGULAN KOMPETITIF UNIVERSITAS SRIWIJAYA PENERAPAN METODE TAGUCHI UNTUK OPTIMASI PARAMETER PEMESINAN FREIS DENGAN CAIRAN PEMOTONGAN RAMAH LINGKUNGAN DISUSPENSI NANO FLUIDA MENGGUNAKAN TEKNIK MINIMUM QUANTITY LUBRICATION. Project Report. Prodi S1-Teknik Mesin, Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin and Firdaus, Aneka and Mataram, Agung (2023) PENGEMBANGAN ALAT PENGGILING TEBU SKALA LABORATOIUM DARI PTPN VII PABRIK GULA CINTA MANIS GUNA MENINGKATKAN KINERJA PRODUKSI. Project Report. Burro of Community Service, Sriwijaya University, Palembang, Indonesia. (Unpublished)

Yanis, Muhammad and Basri, Hasan and Mohruni, Amrifan Saladin and Yani, Irsyadi and Arifin, Amir and Gunawan, Gunawan and Saputra, Ade (2023) PENINGKATAN PRODUKTIFITAS MESIN BUBUT DI INDUSTRI KECIL MESIN PERKAKAS DALAM PEMBUATAN KOMPONEN YANG LEBIH BERVARIASI DENGAN ALAT BANTU TAMBAHAN (ATTACHMENT). Project Report. Faculty of Engineering, Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Mataram, Agung and Mohruni, Amrifan Saladin and Bizzy, Irwin and Yanis, Muhammad (2023) LAPORAN AKHIR PENELITIAN UNGGULAN KOMPETITIF UNIVERSITAS SRIWIJAYA PENGGUNAAN MEMBRAN POLYVINILIDENE FLUORIDE SEBAGAI MEDIA PENYARINGAN AIR DENGAN MODIFIKASI ELEKTRIK FIELD 15000 kV DV. Project Report. Lembaga Penelitian Pengabdian Masyarakat, Palembang, Indonesia. (Unpublished)

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) Performance Evaluation of Green Machining on Thin-Walled Ti6Al4V using Response Surface Methodology and Artificial Neural Networks. Documentation. Doctoral Study Program in Engineering Science, Sriwijaya University, Palembang, South Sumatera, Indonesia.

Pratiwi, Diah Kusuma and Sipahutar, Riman and Mohruni, Amrifan Saladin and Abidin, Zainal and Kadir, Muhammad Zahri and Santoso, Dyos and Marwani, Marwani and Ellyanie, Ellyanie and Astuti, Astuti (2011) PENYULUHAN DAN PERCONTOHAN OVEN PENGERING UNTUK MENGATASI KENDALA CUACA DAN MENINGKATKAN KUALITAS PADA INDUSTRI RUMAH TANGGA KEMPLANG DI DESA TEBING GRINTING UTARA. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Mohruni, Amrifan Saladin and Alwani, Hairul and Haki, Helmi and Rahman, Abdur and Eko Handayani, Harminuke and Anwar, Ubaidillah and Nurisman, Enggal and Al Amin, M. Baitullah and Bochori, Bochori (2011) PERCONTOHAN OVEN SURYA DI SMA PGRI 1 INDERALAYA KABUPATEN OGAN ILIR. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Sipahutar, Riman and Kaprawi, Kaprawi and Alian, Helmy and Santoso, Dyos and Kadir, Muhammad Zahri and Marwani, Marwani and Hadi, Qomarul and Nukman, Nukman and Mohruni, Amrifan Saladin (2011) PENYULUHAN PENGGUNAAN MESIN RECOVERY, RECYCLE DAN RECHARGING (MESIN 3R) UNTUK MENCEGAH PERUSAKAN LAPISAN OZON DI INDERALAYA KABUPATEN OGAN ILIR. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Burlian, Firmansyah and Firdaus, Aneka and Thamrin, Ismail and Yanis, Muhammad and Abunaim, Teguh Budi S. and Mohruni, Amrifan Saladin and Bayin, Darmawi and Hadi, Qomarul and Barlin, Barlin (2011) RANCANG BANGUN KOMPOR ENERGI SURYA TIPE KOTAK DENGAN SISTEM KONSENTATOR CERMIN DATAR DI KELOMPOK PENGUSAHA KECIL PEMBUAT TEMPE DI LEMABANG PALEMBANG. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Firdaus, Aneka and Burlian, Firmansyah and Yanis, Muhammad and Thamrin, Ismail and Mohruni, Amrifan Saladin (2011) STUDI PENGARUH TEBAL ISOLASI TERMAL YANG TERBUAT DARI DAHAN GLASS WOOL TERHADAP LAJU PENGERINGAN IKAN PADA ALAT PENGERING IKAN. Project Report. LAPORAN PENELITIAN DOSEN DAN MAHASISWA, Mechanical Engineering Department, Faculty of Engineering, Sriwijaya University, Indralaya, OKI, South Sumatera, Indonesia. (Unpublished)

Sipahutar, Riman and Kaprawi, Kaprawi and Santoso, Dyos and Yanto, Joni and HY, Fusito and Mohruni, Amrifan Saladin and Astuti, Astuti and Gustini, Gustini and Ellyanie, Ellyanie and Alian, Helmy (2010) TUNGKU ARANG UNTUK INDUSTRI KECIL PANDAI BESI. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Arifin, Amir and Akhmad, Al Antoni and Mohruni, Amrifan Saladin and Sipahutar, Riman and Chandra, Hendri and Burlian, Firmansyah and Abidin, Zainal and Firdaus, Aneka and Marwani, Marwani and Gunawan, Gunawan (2010) PELATIHAN PEMBUATAN E-LEARNING BERBASIS WEB DENGAN MENGGUNAKAN PROGRAM MOODLE UNTUK GURU SMU PGRI INDRALAYA. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Akhmad, Al Antoni and Mohruni, Amrifan Saladin and Alian, Helmy and Hadi, Qomarul and Abunaim, Teguh Budi S. and Ellyanie, Ellyanie and Abidin, Zainal and Yanto, Joni and Santoso, Dyos and HY, Fusito and Astuti, Astuti (2010) PEMBUATAN KOMPOR BIODIGESTER ENCENG GONDOK SEBAGAI SUMBER ENERGI ALTERNATIF BAGI MASYARAKAT DI KECAMATAN GANDUS KOTAMADYA PALEMBANG DAN KECAMATAN INDRALAYA KABUPATEN OGAN ILIR. Project Report. Faculty of Engineering, Sriwijaya University, Palembang, South Sumatera, Indonesia. (Unpublished)

Akhmad, Al Antoni and Mohruni, Amrifan Saladin and Hadi, Qomarul and Abidin, Zainal and Yanto, Joni and Arifin, Amir (2010) PEMBUATAN SISTEM DATABASE BERBASIS WEB STUDI KASUS LABORATORIUM CNC-CAD/CAM JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Project Report. LAPORAN PENELITIAN DOSEN DAN MAHASISWA, Mechanical Engineering Department, Faculty of Engineering, Sriwijaya University, Indralaya, OKI, South Sumatera, Indonesia. (Unpublished)

Conference or Workshop Item

Yuliwati, Erna and Mohruni, Amrifan Saladin (2013) POLYVINYLIDENE FLUORIDE HOLLOW FIBER MEMBRANES FOR REFINERY WASTEWATER TREATMENT: EFFECT OF AIR GAP LENGTH ON MEMBRANE MORPHOLOGY AND PERFORMANCE. In: The 11th International on Membrane Science & Technology, 27-29 August 2013, Kuala Lumpur.

Mohruni, Amrifan Saladin and SUPARMAN, DEDI (2012) Mathematical Modeling for Turning on Steels using Response Surface Methodology. In: Seminar Nasional Tahunan Teknik Mesin XI (SNTTM XI) & Thermofluid IV Universitas Gadjah Mada (UGM), 16-17 October 2012, Yogyakarta.

Abunaim, Teguh Budi S. and Mohruni, Amrifan Saladin and ARIFIN, - (2011) Studi Eksperimental Optimalisasi Campuran Bahan Bakar Solar dengan Crude Jatropha Oil (CJO) Terhadap Karakteristik Motor Diesel Didacta Italia Test Bed T 85 D. In: Seminar Nasional Teknik Mesin (SNTM) X, 2-3 November 2011, Malang.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and HANSON, RAHMADI (2011) Optimization of Cutting Conditions when End Milling Aeronautic Materials (Ti-6Al-4V) using Genetic Algorithm and Response Surface Methodology. In: The 12th International Conference on QiR (Quality in Research) 2011, 4-7 July 2011, Denpasar, Bali.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and SANTO, P. S. (2009) Implementation of Genetic Algorithm in Tool Life Optimization when End Milling of Ti64 using TiAlN Coated Tools. In: Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII, 11-12 Agustus 2009, Semarang.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and FAIZAL, HERDINALD (2009) Optimization of Surface Roughness in End Milling Ti-6Al-4V using TiAlN Coated Tools by Utilizing Genetic Algorithm. In: Seminar on Application and Research in Industrial Technology, SMART, 22 July 2009, Yogyakarta.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and ARDIANSYAH, AHMAD (2009) Utilization of Genetic Algorithm for Cutting Force Optimization when Machining Ti-6Al-4V using TiAlN Coated End Mills. In: Seminar Nasional Teknik Mesin 4, Universitas PETRA, 30 June 2009, Surabaya.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof (2008) Mathematical Modeling of Cutting Force in End Milling Ti-6Al4V using TiAlN Coated Carbide Tools. In: International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru, Malaysia., 21– 23 May 2008, Johor Bahru, Malaysia..

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2007) Application of Response Surface Methodology in the Development of Tool Life Prediction Models when End Milling Ti-6Al4V. In: The 10th International Conference on Quality in Research (QIR) 2007, 4-6 December 2007, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2007) Optimization of Surface Roughness when End Milling Ti-6Al4V using TiAlN Coated Tool. In: The 10th International Conference on Quality in Research (QIR) 2007, 4-6 December 2007, Jakarta, Indonesia.

Sharif, Safian and Rahim, Erween Abdul and Mohruni, Amrifan Saladin and Jawaid, A (2007) Effect of Edge Geometry on PVD-TiN Coated Carbide Tools when Face Milling Titanium Alloy, Ti-6246. In: The 4th International Conference on Leading Edge Manufacturing in 21st Century, 7-9 November 2007, Fukuoka, Japan.

Mohruni, Amrifan Saladin and Sharif, Safian and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2006) Investigation of Optimum Cutting Condition when End Milling Titanium Alloy Ti-6Al-4V. In: The 9th International Conference on Quality In Research 2006, 6-7 September 2006, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, Safian and Syed, Mat Isa (2006) Investigation The Surface Integrity of Uncoated and TICN Coated Carbides Tools When End Milling of Titanium Alloy Ti-6Al=4V. In: National Scientific Meeting of Indonesians Engineering Lecturer (PNDT 2006), 5-6 September 2006, Jakarta, Indonesia.

Sharif, Safian and Mohruni, Amrifan Saladin and Noordin, Mohd. Yusof and Venkatesh, Vellore C. (2006) Optimization of Surface Roughness Prediction Model in End Milling Titanium Alloy (Ti-6Al4V). In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Malacca, Malaysia.

Mohruni, Amrifan Saladin and Sharif, Safian (2006) Cutting Force Predictions Models in End Milling Titanium Alloy Ti-6Al-4V. In: 1st Regional Postgraduate Conference on Engineering & Science, 26-27 July 2006, Johor Bahru.

Sharif, Safian and Mohruni, Amrifan Saladin and Noordin, Mohd. Yusof (2006) Modeling of tool life when end milling on titanium alloy (Ti-6Al-4V) using response surface methodology. In: The 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, 14-15 Maret 2006, Kuala Lumpur, Malaysia.

Rahim, Erween Abdul and Sharif, Safian and Ahmad, Zainal Abidin and Mohruni, Amrifan Saladin and Syed, Mat Isa (2005) Machinability Investigation when Drilling Titanium Alloys. In: International Conference on Leading Edge Manufacturing in 21st Century (LEM2005), 19-22 October 2005, Nagoya, Japan.

Sharif, Safian and Mohruni, Amrifan Saladin (2005) Performance Evaluation of uncoated and TiCN coated Carbide Tools when End Milling of Titanium Alloy Ti-6Al-4V. In: The 8th International Conference on Quality In Research 2005, 9-10 August 2005, Jakarta, Indonesia.

Mohruni, Amrifan Saladin (2001) Studi Eksperimental Pelapisan Logam Chromium (Hard Chromium Plating) dengan Variasi Parameter Proses. In: The 4th Quality in Research (QiR) Seminar, Faculty of Engineering, University of Indonesia, 21-23 August 2001, Jakarta, Indonesia.

Mohruni, Amrifan Saladin (2001) Studi Eksperimental Peningkatan Kualitas Proses Bor (High Speed Cutting Process) pada bermacam-macam baja. In: The 4th Quality in Research (QiR) Seminar, Faculty of Engineering, University of Indonesia, 21-23 August 2001, Jakarta, Indonesia.

Book

BOBIE, BOBIE and Mohruni, Amrifan Saladin (2019) ANALISIS DISTRIBUSI TEMPERATUR BENDA KERJA PADA PROSES PEMBUBUTAN TITANIUM TI6AL4V DENGAN PENDINGIN CRYOGENIC MENGGUNAKAN FEM SOFTWARE DEFORM INTEGRATED 2D. Prodi S1-Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia. (Unpublished)

Thesis

OKTARINI, DEVIE and Mohruni, Amrifan Saladin and Sharif, Safian and Yanis, Muhammad (2024) OPTIMIZATION OF SUGARCANE PROCESS PRODUCTION USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS. Doctoral thesis, Sriwijaya University.

ATOS, PRAJA DILLA and Mohruni, Amrifan Saladin (2024) REINFORCEMENT DESIGN KONSTRUKSI TAKEUP TOWER BERDASARKAN ANALISA TEGANGAN. Masters thesis, Sriwijaya University.

DZAHWAN, ABYAN and Mohruni, Amrifan Saladin and Yudha, Arie (2024) ANALISIS TEGANGAN PADA RANGKA ALAT PEMERAS TEBU DENGAN METODE ELEMEN HINGGA MENGGUNAKAN SOLIDWOKRS. Undergraduate thesis, Sriwijaya University.

RAFLI, MUHAMMAD and Mohruni, Amrifan Saladin and Yudha, Arie (2024) ANALISIS TEGANGAN PADA ROLLER ALAT PEMERAS TEBU DENGAN METODE ELEMEN HINGGA MENGGUNAKAN SOLIDWORKS. Undergraduate thesis, Sriwijaya University.

GERALDI, EGIA RESKI and Mohruni, Amrifan Saladin and Saputra, M. A. Ade (2023) ANALISIS BEBAN KERJA SEBAGAI KEY PERFORMANCE INDICATOR (KPI) INDUSTRI MANUFAKTUR STUDI KASUS DI JURUSAN TEKNIK MESIN. Undergraduate thesis, Sriwijaya University.

AKBAR, ROMI and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2023) ANALISIS KEKASARAN PERMUKAAN DAN KEAUSAN PAHAT PADA PROSES MILLING MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Undergraduate thesis, Sriwijaya University.

SYAHMORA, AFLAA AUFAAROZA ABDURRAFI and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2023) ANALISIS KEKASARAN PERMUKAAN DAN KEAUSAN PAHAT PADA PROSES DRILLING MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Undergraduate thesis, Sriwijaya University.

ARYANTO, OKTA and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2023) ANALISIS KEKASARAN PERMUKAAN DAN KEAUSAN PAHAT PADA PROSES TURNING MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Undergraduate thesis, Sriwijaya University.

HANAFI, REZA FITRAH and Mohruni, Amrifan Saladin (2023) PERANCANGAN APLIKASI PENGUJIAN PRODUK BERBASIS WEB DARI UNSUR PRAKTISI (STUDI KASUS; PADA PROGRAM PROFESI INSINYUR UNIVERSITAS SRIWIJAYA). Undergraduate thesis, Sriwijaya University.

BERNIKO, MUHAMMAD ALDY and Mohruni, Amrifan Saladin (2023) PERANCANGAN APLIKASI PENGUJIAN PRODUK BERBASIS WEB; STUDI KASUS PADA PROGRAM STUDI PROGRAM PROFESI INSINYUR DARI UNSUR TENAGA PENDIDIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

AKBAR, AZHARI and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN MENGGUNAKAN MESIN MILLING PADA MATERIAL BAJA KARBON TINGGI AISI D2 DINDING TIPIS PADA KONDISI KRIOGENIK. Undergraduate thesis, Sriwijaya University.

DAULAY, MUHAMMAD BAGUS AL MAKSUM and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN PADA BAJA KARBON TINGGI AISI D2 THIN WALLED DALAM KONDISI KRIOGENIK. Undergraduate thesis, Sriwijaya University.

FADILLAH, MUHAMMAD REYHAN and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS KEKASARAN PERMUKAAN PADA PEMESINAN FREIS STAINLESS-STEEL 304 DINDING TIPIS DENGAN PENDINGINAN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

KUSUMA BAYU, MUHAMMAD GALUH and Mohruni, Amrifan Saladin and Budiman, Arie Yudha (2022) ANALISIS SURFACE ROUGHNESS MATERIAL STAINLESS STEEL 304 DINDING TIPIS PADA MESIN MILLING MENGGUNAKAN PENDINGIN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

FARAMADINA, FARESTA and Mohruni, Amrifan Saladin (2022) PEMBUATAN DETAILED ENGINEERING DESIGN RANGKA DARI MILLING STATION DI PT. CINTA MANIS. Undergraduate thesis, Sriwijaya University.

ALFARISY, MUHAMMAD and Mohruni, Amrifan Saladin (2022) PEMBUATAN DETAILED ENGINEERING DESIGN ROLLER DARI MILLING STATION DI PT. CINTA MANIS. Undergraduate thesis, Sriwijaya University.

NURQOSIM, MALIK and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN DAN PENERAPAN APLIKASI DATABASE BERBASIS SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS) MENGGUNAKAN TEORI COMPUTER INTEGRATED MANUFACTURING (CIM) DI RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

NEGARA, RENALDI TRI KUSUMA and Mohruni, Amrifan Saladin (2022) PENGEMBANGAN MANAGEMENT INVENTORY DATABASE MENGGUNAKAN APLIKASI SENAYAN LIBRARY MANAGEMENT SYSTEM (SLiMS) DENGAN STUDI KASUS REGISTRASI INVENTARIS BUKU PADA RUANG BACA FAKULTAS HUKUM UNIVERSITAS SRIWIJAYA MENGGUNAKAN METODE COMPUTER INTEGRATED MANUFACTURING. Undergraduate thesis, Sriwijaya University.

IRHAM, MUHAMMAD RIDHO and Mohruni, Amrifan Saladin (2022) PENGAPLIKASIAN COMPUTER INTEGRATED MANUFACTURING DALAM PENGELOLAAN SENAYAN LIBRARY MANAGEMENT SYSTEM (SLIMS), STUDI KASUS : REGISTRASI INVENTARIS BUKU PADA RUANG BACA JURUSAN YANG TERDAPAT PADA FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

PRADANA, ALDYS MEICHAL and Mohruni, Amrifan Saladin and Saputra, Ade (2022) PENGEMBANGAN SISTEM INVENTORY MANAGEMENT RUANG BACA DENGAN METODE COMPUTER INTEGRATED MANUFACTURING (CIM) DI FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

KAMIL, MUHAMMAD IHSAN and Mohruni, Amrifan Saladin (2022) PEMBUATAN PROTOTIPE DATABASE INVENTORI STUDI KASUS DI PERPUSTAKAAN BERDASARKAN TEKNOLOGI RADIO FREQUENCY IDENTIFICATION. Undergraduate thesis, Sriwijaya University.

ARIS, MUHAMMAD and Mohruni, Amrifan Saladin (2021) APPLICATION PROGRAMMING INTERFACE DALAM SISTEM INFORMASI MANAJEMEN DI BIDANG MANUFAKTUR YANG DI APLIKASIKAN PADA E - LEARNING UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

RAMADHAN, I PUTU AHMAD WALMANDA R and Mohruni, Amrifan Saladin (2021) ANALISIS PREDIKSI TERHADAP KEKASARAN PERMUKAAN PADA PROSES PEMBUBUTAN MENGGUNAKAN METODE ANN (ARTIFICIAL NEURAL NETWORK). Undergraduate thesis, Sriwijaya Univesity.

NUGRAHA, BIMA SATRIA and Mohruni, Amrifan Saladin and BUDIMAN, ARIE YUDHA (2021) PENGARUH KECEPATAN POTONG, KEDALAMAN POTONG RADIAL DAN AXIAL TERHADAP KEKASARAN PERMUKAAN PADA PROSES FRAIS KRIOGENIK. Undergraduate thesis, Sriwijaya University.

SAPUTRA, DERA and Mohruni, Amrifan Saladin (2021) PERANCANGAN RIG PADA PROSES ALIRAN CRYOGENIC MENGGUNAKAN BAJA RINGAN. Undergraduate thesis, Sriwijaya Univesity.

ERISTA, ERLAN WAHYU and Mohruni, Amrifan Saladin (2020) ANALISIS KEKASARAN PERMUKAAN PADA PEMBUBUTAN TITANIUM MENGGUNAKAN SISTEM PENDINGINAN KRIOGENIK. Undergraduate thesis, Sriwijaya University.

FAJAR, LUKMAN and Mohruni, Amrifan Saladin (2020) PERANCANGAN RODA GIGI PADA PERALATAN UJI PROSES PENGGILINGAN TEBU DENGAN INSTALLED MILLING MACHINE DI PABRIK GULA CINTA MANIS. Undergraduate thesis, Sriwijaya University.

THAMRIN, ISMAIL and Mohruni, Amrifan Saladin and Sipahutar, Riman and Yani, Irsyadi (2020) PEMODELAN KEKASARAN PERMUKAAN BENDA KERJA DAN TEMPERATUR PADA PEMBUBUTAN PANAS AISI 4340 DENGAN METODE RESPON PERMUKAAN DAN JARINGAN SARAF TIRUAN. Doctoral thesis, Sriwijaya University.

SETIAWAN, DWI and Mohruni, Amrifan Saladin (2020) PERANCANGAN ROLLER UNTUK PROSES PENGGILINGAN TEBU DENGAN STUDI KASUS PADA INSTALLED MILLING MACHINE DI PABRIK GULA CINTA MANIS. Undergraduate thesis, Sriwijaya University.

ALDRIANT, MUHAMMAD FARIZ and Mohruni, Amrifan Saladin and Saputra, M. A. Ade (2019) ANALISIS BEBAN KERJA SEBAGAI KEY PERFORMANCE INDICATOR (KPI) INDUSTRI MANUFAKTUR STUDI KASUS DI PERPUSTAKAAN UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

YANIS, MUHAMMAD and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) PERFORMANCE EVALUATION OF GREEN MACHINING ON THIN-WALLED Ti6Al4V USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS. Doctoral thesis, Sriwijaya University.

NUGRASYAH, AMRILLAH and Mohruni, Amrifan Saladin (2019) APPLICATION OF PRODUCT QUALITY ASSURANCE IN MANUFACTURE, CASE STUDY IN MECHANICAL ENGINEERING DEPARTMENT SRIWIJAYA UNIVERSITY. Master thesis, Sriwijaya University.

SALSABILA, AUDREY ALMIRA and Mohruni, Amrifan Saladin (2019) ANALISIS GETARAN PADA LOBES THIN-WALLED TI6AL4V MENGGUNAKAN SOFTWARE SOLIDWORKS. Undergraduate thesis, Sriwijaya University.

RAHMAT, MUHAMMAD NUZUL and Mohruni, Amrifan Saladin (2019) SIMULASI METODE ELEMEN HINGGA UNTUK THIN WALLED TI-6AL-4V MENGGUNAKAN SOFTWARE ADVANTEDGE. Undergraduate thesis, Sriwijaya University.

ASYA'ARI, AHMAD BAYU and Mohruni, Amrifan Saladin (2019) SIMULASI THIN WALLED TI-6AL-4V MENGGUNAKAN SOFTWARE ABAQUS. Undergraduate thesis, Sriwijaya University.

AZUHRI, M. AZOM and Mohruni, Amrifan Saladin (2019) WEB-BASED ACADEMIC QUALITY ASSURANCE DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWJAYA, STUDI KASUS: PROSES BELAJAR MENGAJAR DI KAMPUS INDRALAYA. Undergraduate thesis, Sriwijaya University.

HANIPA, HANIPA and Mohruni, Amrifan Saladin (2019) ANALISIS KEAUSAN PAHAT KARBIDA PADA PROSES PEMBUBUTAN TITANIUM Ti6Al4V MENGGUNAKAN SOFTWARE DEFORM INTEGRATED-2D. Undergraduate thesis, Sriwijaya University.

ALMALIKI, SIDIK and Mohruni, Amrifan Saladin (2019) ANALISIS GAYA POTONG DAN GAYA PEMAKANAN PADA PROSES PEMESINAN BUBUT TITANIUM Ti6Al4V. Undergraduate thesis, Sriwijaya University.

ZAHIR, MUHAMMAD and Mohruni, Amrifan Saladin and Yanis, Muhammad (2018) INVESTIGATION OF VIBRATION CHARACTERISTICS ON THE END-MILLING PROCESS OF THIN-WALLED Ti6Al4V. Master thesis, Sriwijaya University.

CAKSONO, TEGUH DWI and Mohruni, Amrifan Saladin (2018) WEB-BASED QUALITY ASSURANCE DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWIJAYA STUDI KASUS: AKTIVITAS BELAJAR MENGAJAR DI KAMPUS PALEMBANG. Undergraduate thesis, Sriwijaya University.

IMANI, M. LAZWARDHY AKBAR and Mohruni, Amrifan Saladin (2018) WEB-BASED ACADEMIC QUALITY ASSURANCE DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWIJAYA PALEMBANG (STUDI KASUS SARANA DAN PRASARANA AKADEMIK DI KAMPUS PALEMBANG). Undergraduate thesis, Sriwijaya University.

MUHAMMAD, FAKHRI LUTHFI and Mohruni, Amrifan Saladin (2018) WEB-BASED ACADEMIC QUALITY ASSURANCE DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWIJAYA PALEMBANG (STUDI KASUS; AKTIVITAS AKADEMIK MAHASISWA DI KAMPUS PALEMBANG). Undergraduate thesis, Sriwijaya University.

MUZAKKI, MUHAMMAD FAZAL and Mohruni, Amrifan Saladin (2018) ANALISIS PREDIKSI KEKASARAN PERMUKAAN PEMODELAN HARD TURNING PADA STAINLESS STEEL 304 MENGGUNAKAN PAHAT HIGH SPEED STEEL. Undergraduate thesis, Sriwijaya University.

ISLAMI, PANDU and Mohruni, Amrifan Saladin (2018) WEB-BASED ACADEMIC QUALITY ASSURANCE DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWIJAYA, STUDI KASUS: KEGIATAN AKADEMIK DOSEN DI KAMPUS INDERALAYA. Undergraduate thesis, Sriwijaya University.

SAPUTRA, TRYATMOJO and Mohruni, Amrifan Saladin and Yanis, Muhammad (2017) ANALISA DISTRIBUSI TEMPERATUR CHIP PADA PROSES PEMBUBUTAN DENGAN PENDINGIN KRIOGENIK MENGGUNAKAN FEM-AUTODESK MECHANICAL SIMULATION 2016. Undergraduate thesis, Sriwijaya University.

HERBIAN, MEIZAN TWISTA and Mohruni, Amrifan Saladin (2017) ANALISA PENGARUH SUDUT GERAM TERHADAP DISTRIBUSI TEMPERATUR PADA PEMBUBUTAN TITANIUM DENGAN PENDINGIN SCCO2 MENGGUNAKAN SOFTWARE AUTODESK SIMULATION MECHANICAL 2016. Undergraduate thesis, Sriwijaya University.

FIQHI, AL and Mohruni, Amrifan Saladin (2017) ANALISA PENGARUH SUDUT GERAM TERHADAP TEGANGAN PADA PEMBUBUTAN TITANIUM DENGAN PENDINGIN SCCO2 MENGGUNAKAN SOFTWARE AUTODESK SIMULATION MECHANICAL 2016. Undergraduate thesis, Sriwijaya University.

FIKRI, FAISAL and Mohruni, Amrifan Saladin (2017) DESAIN QUICK STOP DEVICE P ADA PROSES BUBUT MENGGUNAKAN SOFTWARE AUTODESK INVENTOR 2016. Undergraduate thesis, Sriwijaya University.

ANDRIANTO, SEFTYAN and Mohruni, Amrifan Saladin (2017) PENGARUH VARIASI KECEPATAN POTONG (Vc) DAN KEDALAMAN POTONG (DOC) TERHADAP BESAR KALOR YANG DIBANGKITKAN PADA PROSES BUBUT. Undergraduate thesis, Sriwijaya University.

RIDLO, M. RIV’AT and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH KONDISI PEMOTONGAN TERHADAP KEKASARAN PERMUKAAN Ti6Al4V PADA PROSES FRAIS DENGAN METODE ARTIFICIAL NEURAL NETWORK. Undergraduate thesis, Sriwijaya University.

SUZEN, ZALDY SIRWANSYAH and Mohruni, Amrifan Saladin (2016) KINERJA PAHAT KARBIDA PADA PROSES FRAIS PELAT TIPIS Ti6Al4V MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Master thesis, Sriwijaya University.

YULIANTO, YULIANTO and Mohruni, Amrifan Saladin and Pratiwi, Diah Kusuma (2016) OPTIMASI PARAMETER PEMOTONGAN DAN PENGGUNAAN BRASS WIRE UNTUK PEMOTONGAN Ti-6Al-4V WIRE CUT DENGAN APLIKASI RESPONSE SURFACE METHODOLOGY (RSM). Master thesis, Sriwijaya University.

FADHLI, MUHAMMAD and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH PARAMETER PEMESINAN TERHADAP GEOMETRI GERAM Ti-6Al-4V PADA PROSES PEMBUBUTAN. Undergraduate thesis, Sriwijaya University.

TRI WIJAYA, FRAN and Mohruni, Amrifan Saladin (2016) ANALISA DISTRIBUSI TEMPERATUR PAHAT PADA PROSES PEMBUBUTAN TITANIUM DENGAN FEM-SIMULATION MENGGUNAKAN SOFTWARE AUTODESK INVENTOR 2016. Undergraduate thesis, Sriwijaya University.

ZIKRI, BAHRAN and Mohruni, Amrifan Saladin (2016) ANALISIS DISTRIBUSI TEMPERATUR GERAM PADA PROSES PEMBUBUTAN Ti-6Al-4V DENGAN FEM-SIMULATION MENGGUNAKAN SOFTWARE AUTODESK SIMULATION MECHANICAL 2016. Undergraduate thesis, Sriwijaya University.

RIDHO, MUHAMMAD RASYID and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH PANAS PROSES PEMBUBUTAN PADA PAHAT HSS TERHADAP PERUBAHAN STRUKTUR MIKRO. Undergraduate thesis, Sriwijaya University.

ALFARISI, IMAM and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH VARIABEL PROSES PEMOTONGAN TERHADAP TINGKAT KEKASARAN PERMUKAAN Ti-6Al-4V PADA MESIN WIRE ELECTRICAL DISCHARGE MACHINING. Undergraduate thesis, Sriwijaya University.

RAMADHANY, FEBRIYANDI and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH KONDISI PEMOTONGAN TERHADAP UMUR PAHAT PADA PROSES FREIS MENGGUNAKAN METODE ANN (ARTIFICIAL NEURAL NETWORKS). Undergraduate thesis, Sriwijaya University.

ADE SAPUTRA, MUHAMMAD AMSAL and Mohruni, Amrifan Saladin and Yani, Irsyadi (2016) THE WORK SCHEDULING PROGRAM DESIGN : CASE STUDY MONITORING SYSTEM, COLLEGE CONTROL AND LECTURER WORKLOAD CALCULATION USING FINGERPRINT AND RFID. Master thesis, Sriwijaya University.

GEOFARY, M. IMAM and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH VARIABEL PEMOTONGAN Ti-6Al-4V DENGAN MESIN WEDM TERHADAP PERUBAHAN RECAST THICKNESS. Undergraduate thesis, Sriwijaya University.

SAPUTRA, M FIKRI and Mohruni, Amrifan Saladin (2016) ANALISIS PENGARUH VARIABEL PROSES PEMOTONGAN PADA MESIN WEDM TERHADAP DISTRIBUSI KEKERASAN Ti-6Al-4V. Undergraduate thesis, Sriwijaya University.

WIJAYA, HENDRA and Mohruni, Amrifan Saladin (2016) DYNAMIC SIMULATION SOLIDWORKS PADA RANCANGAN PERALATAN MESIN UJI PENGAMPLASAN KAYU. Undergraduate thesis, Sriwijaya University.

WIRATNO, ENJANG BAYU and Mohruni, Amrifan Saladin (2016) PENGARUH KECEPATAN POTONG DAN KECEPATAN PEMAKANAN PADA KUNINGAN TERHADAP UMUR PAHAT HSS CO DENGAN METODE PENGAMATAN AUS TEPI. Undergraduate thesis, Sriwijaya University.

ROMADHON, ILHAM and Mohruni, Amrifan Saladin (2015) OTOMATISASI PENGISIAN BAK PENAMPUNGAN AIR MENGGUNAKAN SENSOR ULTRASONIK DI APLIKASIKAN PADA FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

SETIYONO P, IRAWAN and Mohruni, Amrifan Saladin (2015) ANALISIS PENGARUH CAIRAN PENDINGIN MINYAK KELAPA DAN TANPA CAIRAN PENDINGIN TERHADAP KEKASARAN PERMUKAAN KUNINGAN PADA PEMESINAN CNC TU-2A. Undergraduate thesis, Sriwijaya University.

DEAGONA, DOLA FRIYANTO and Mohruni, Amrifan Saladin (2015) PENGARUH KECEPATAN POTONG DAN KECEPATAN PEMAKANAN TERHADAP KEKASARAN PERMUKAAN YELLOW BRASS PADA PROSES SIDE MILLING. Undergraduate thesis, Sriwijaya University.

YUDHISTIRO, MAHFUD and Mohruni, Amrifan Saladin (2015) PERBANDINGAN EVALUASI KINERJA FEM-SIMULATION MENGGUNAKAN SOLIDWORKS 2014 DENGAN ABAQUS/CAE 6.14 BERDASARKAN HASIL DEFORM-3D. Undergraduate thesis, Sriwijaya University.

ASMAUN, ASMAUN and Mohruni, Amrifan Saladin and Yanis, Muhammad (2015) ANALISA PENGARUH PENGAMPELASAN PADA KAYU KULIM (SCORODOCARPUS BORNEESIS BAILLON BECC) DENGAN MENGGUNAKAN RESPONSE SURFACE METHODOLOGY (RSM). Master thesis, Sriwijaya University.

MARTOMI, EKA SATRIA and Mohruni, Amrifan Saladin and Yanis, Muhammad (2014) PENGARUH LAJU PEMAKANAN (FEED RATE) DAN UKURAN AMPLAS (GRIT SIZE) DALAM PROSES PENGAMPLASAN TERHADAP KEKASARAN PERMUKAAN KAYU PETANANG (DRYOBALANOPS OBLONGIFOLIA DYER) MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Master thesis, Sriwijaya University.

REKASIWI, RENDI and Mohruni, Amrifan Saladin (2014) FEM – MODELING FOR METAL FORMING OF SHEET METAL. Undergraduate thesis, Sriwijaya University.

RUDIANSYAH, RUDIANSYAH and Mohruni, Amrifan Saladin (2014) PERANCANGAN PERALATAN UJI PROSES PENGAMPLASAN KAYU. Undergraduate thesis, Sriwijaya University.

SUNDARI, ELLA and Mohruni, Amrifan Saladin and Yanis, Muhammad (2014) ANALISA PENGARUH PENGAMPLASAN PADA KAYU TEMBESU (FAGRAEA FRAGRANS ROXB) MENGGUNAKAN METODOLOGI PERMUKAAN RESPON. Master thesis, Sriwijaya University.

BUDIMAN, ARIE YUDHA and Mohruni, Amrifan Saladin and Yanis, Muhammad (2014) PENGARUH PARAMETER PEMESINAN PADA PROSES PENGAMPLASAN TERHADAP KEKASARAN PERMUKAAN KAYU JATI MENGGUNAKAN RESPONSE SURFACE METHODOLOGY (RSM). Master thesis, Sriwijaya University.

BURMANS, ANDREAS and Mohruni, Amrifan Saladin (2014) SIMULASI UJI BENDING SHEET METAL FORMING ST 37 MENGGUNAKAN SOLIDWORKS. Undergraduate thesis, Sriwijaya University.

NOPRIADI, NOPRIADI and Mohruni, Amrifan Saladin (2014) PENGARUH FEEDING DAN GRIT SIZE TERHADAP KEKASARAN PERMUKAAN KAYU MERBAU DENGAN PROSES PENGAMPLASAN (SANDING). Undergraduate thesis, Sriwijaya University.

SAPUTRA, ALIM BUDIMAN and Mohruni, Amrifan Saladin (2014) PENJADWALAN WAKTU KERJA MENGGUNAKAN PROGRAM BERBASIS WEB PADA STUDI KASUS DI JURUSAN TEKNIK MESIN UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

WIJAYA, AGUNG and Mohruni, Amrifan Saladin (2014) PENGARUH PENGAMPLASAN (SANDING) TERHADAP KEKASARAN PERMUKAAN KAYU MERAWAN MENGGUNAKAN MESIN FRAIS HORIZONTAL. Undergraduate thesis, Sriwijaya University.

SATRIA, ALFI and Mohruni, Amrifan Saladin (2013) PENGARUH PENGAMPLASAN ( SANDING) TERHADAP KEKASARAN PERMUKAAN KAYU JATI (TECTONA GRANDIS) MENGGUNAKAN MESIN FRAIS HORIZONTAL. Undergraduate thesis, Sriwijaya University.

ITALIYANO, YOHANES and Mohruni, Amrifan Saladin (2013) PENGARUH PENGAMPLASAN (SANDING) TERHADAP KEKASARAN PERMUKAAN KAYU KAMPER SAMARINDA (DRYOBALANOPS) MENGGUNAKAN MESIN FRAIS HORIZONTAL. Undergraduate thesis, Sriwijaya University.

ABDI NEGARA, RANGGA SATRIA and Mohruni, Amrifan Saladin (2013) PENGARUH PARAMETER PEMESINAN TERHADAP KEKASARAN PERMUKAAN KAYU TEMBESU MENGGUNAKAN MESIN CNC TU-3A YANG DIMODIFIKASI. Undergraduate thesis, Sriwijaya University.

RIDHO, YASRIR and Mohruni, Amrifan Saladin (2013) PENGEMBANGAN KONSTRUKSI DAN PERANCANGAN DATABASE KONSTRUKSI ELEKTRONIK MESIN PENCACAH IKAN. Undergraduate thesis, Sriwijaya University.

KURNIAWAN, EDWIN and Mohruni, Amrifan Saladin (2013) INVESTIGASI PROSES PEMESINAN KERAS (HARD MACHINING) ATAS PENGARUH DARI KECEPATAN POTONG DAN LAJU PEMAKANAN PADA PROSES BUBUT BAJA PERKAKAS AISI D2 MENGGUNAKAN PAHAT CBN TERHADAP KEKASARAN PERMUKAAN BENDA KERJA. Undergraduate thesis, Sriwijaya University.

REKASIWI, RENDI and Mohruni, Amrifan Saladin (2012) FEM - MODELING FOR METAL FORMING OF SHEET METAL. Undergraduate thesis, Sriwijaya University.

SETIABUDI, RYNALDI and Mohruni, Amrifan Saladin (2012) PENGEMBANGAN KONSTRUKSI DAN PERANCANGAN DATABASE KONSTRUKSI ELEKTRONIK MESIN PENCACAH RUMPUT. Undergraduate thesis, Sriwijaya University.

MUHROBIN, REDY KHOLIF and Mohruni, Amrifan Saladin (2012) OPTIMASI KONDISI PEMESINAN UNTUK SURFACE ROUGHNESS PADA PROSES SLOT MILLING STAINLESS STEEL AISI 304. Undergraduate thesis, Sriwijaya University.

MOHTAR, EKO YANUERNA and Mohruni, Amrifan Saladin (2012) PERANCANGAN JIG AND FIXTURE ALAT CNC-CMM THOME PADA LABORATORIUM CNC-CAD/CAM JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. Undergraduate thesis, Sriwijaya University.

NOVIANDO, REKSA and Mohruni, Amrifan Saladin (2012) PEMODELAN MATEMATIKA UNTUK KEKASARAN PERMUKAAN BENDA KERJA STAINLESS STEEL AISI 316 PADA PROSES GURDI. Undergraduate thesis, Sriwijaya University.

KEMBAREN, BILLY HIZKYA and Mohruni, Amrifan Saladin (2012) PENGARUH VARIASI KECEPATAN LAS DAN KUAT ARUS TERHADAP KEKERASAN, TEGANGAN TARIK, STRUKTUR MIKRO BAJA KARBON RENDAH DENGAN ELEKTRODA E 6013. Undergraduate thesis, Sriwijaya University.

ISKANDAR, ISKANDAR and Mohruni, Amrifan Saladin (2011) APLIKASI PEMBUATAN PROGRAM WORKTIME SCHEDULING PADA SISTEM PENDIDIKAN DI JURUSAN TEKNIK MESIN. Undergraduate thesis, Sriwijaya University.

SIRAIT, JOHANNES GUNAWAN and Mohruni, Amrifan Saladin (2011) PENGARUH DERAJAT PERUBAHAN BENTUK DAN KETEBALAN METAL TIPIS TERHADAP SIFAT MEKANIK BAHAN. Undergraduate thesis, Sriwijaya University.

SARMIDI, SARMIDI and Mohruni, Amrifan Saladin (2011) ANALISA KEKASARAN PERMUKAAN PADA LUBANG GURDI DALAM PROSES PENGGURDIAN BAJA KARBON RENDAH MENGGUNAKAN MATA PAHAT HIGH SPEED STEEL (HSS). Undergraduate thesis, Sriwijaya University.

SUPARMAN, DEDI and Mohruni, Amrifan Saladin (2011) STUDI EKSPERIMENTAL PENGARUH VARIASI KECEPATAN PEMOTONGAN DAN GERAK MAKAN TERHADAP UMUR PAHAT DAN KEKASARAN PERMUKAAN. Undergraduate thesis, Sriwijaya University.

IMAWAN, YUSUF PRAYUDI and Mohruni, Amrifan Saladin and Akhmad, Al Antoni (2011) PEMBUATAN APLIKASI PENJADUALAN KERJA DENGAN STUDI KASUS PENGEMBANGAN SISTEM INFORMASI PENJADWALAN PERKULIAHAN PADA JURUSAN TEKNIK MESIN MENGGUNAKAN PROGRAM MICROSOFT VISUAL BASIC 6.0. Undergraduate thesis, Sriwijaya University.

ADE SAPUTRA, MUHAMMAD AMSAL and Mohruni, Amrifan Saladin (2011) PERANCANGAN APLIKASI WAREHOUSE MANAGEMENT SYSTEM (WMS)PADA FAKULTAS TEKNIK BERBASIS WEB MENGGUNAKAN PROGRAM OPEN SOURCE PHP DAN MySQL. Undergraduate thesis, Sriwijaya University.

SITUMORANG, SANTO PENTRI and Mohruni, Amrifan Saladin (2009) IMPLEMENTASI ALGORITMA GENETIKA pada OPTIMASI UMUR PAHAT pada PROSES FREIS UJUNG Ti64 MENGGUNAKAN PAHAT BERSALUT TiAlN. Undergraduate thesis, Sriwijaya University.

FAIZAL, HERDINALD and Mohruni, Amrifan Saladin (2009) OPTIMASI KEKASARAN PERMUKAAN DENGAN ALGORITMA GENETIKA PADA END MILLING Ti-6Al-4V MENGGUNAKAN PAHAT BERSALUT TiAlN. Undergraduate thesis, Sriwijaya University.

ARDIANSYAH, AHMAD and Mohruni, Amrifan Saladin (2009) PENGGUNAAN ALGORITMA GENETIKA UNTUK PENGOPTIMASIAN GAYA POTONG PADA END MILLING Ti6Al4V MENGGUNAKAN PAHAT BERSALUT TiAlN. Undergraduate thesis, Sriwijaya University.

HANSON, RAHMADI and Mohruni, Amrifan Saladin (2009) APLIKASI GENETIC ALGORITHM DIBANDINGKAN DENGAN RESPONSE SURFACE METODOLOGY DALAM MENEMUKAN KONDISI PEMOTONGAN OPTIMUM PADA END MILLING Ti-64. Undergraduate thesis, Sriwijaya University.

UTOMO, RAHMAT and Mohruni, Amrifan Saladin (2003) PENURUNAN MODEL MATEMATIKA SISTEM KONTROL OTOMATIS PADA MEJA KERJA (TABLE) MESIN CNC EMCO TU - 3A. Undergraduate thesis, Sriwijaya University.

TIMORI, FAJAR and Mohruni, Amrifan Saladin (2002) PERANCANGAN KATALOG ELEKTRONIK MESIN TEKAN TEGEL KARYA A. KOMI DENGAN MICROSOFT VISUAL BASIC 6.0. Undergraduate thesis, Sriwijaya University.

PUSVYTA, YENY and Basri, Hasan and Mohruni, Amrifan Saladin (2001) KAJIAN TEORITIS SISTEM PENDINGINAN UDANG WINDU DENGAN KONTROLLER PROPORSIONAL INTEGRAL DIFERENSIAL. Undergraduate thesis, Sriwijaya University.

RAMDANI, ADI and Basri, Hasan and Mohruni, Amrifan Saladin (2000) SISTEM PENGENDALIAN SEDERHANA BERBASIS PROGRAMMABLE LOGICAL CONTROLLER. Undergraduate thesis, Sriwijaya University.

Patent

SENTRA HKI UNIVERSITAS SRIWIJAYA (2021) SISTEM PENYORTIRAN LIMBAH LOGAM SECARA OTOMATIS MENGGUNAKAN SENSOR WARNA CITRA DAN SENSOR PENGATUR CAHAYA SECARA REAL TIME. IDP000079803.

Other

Mohruni, Amrifan Saladin (2023) Reviewer_PARAMETIC ANALYSIS OF HEAT-AFFECTED ZONE (HAZ) CHARACTERISTICS AND TAPER ANGLE DURING MACHINING OF ALUMINA CERAMIC USING CO2 LASER_Journal of Applied Science and Engineering_Q3. Tamkang University, Taipei, Taiwan. (Submitted)

Mohruni, Amrifan Saladin (2023) Reviewer_Optimization of Surface Roughness using the RSM approach in Milling of EN 24 Steel with WC-Coated inserts: Analysis of surface-integrity_Heliyon_Q1. Elsevier BV, Amsterdam, Netherlands. (Submitted)

Yanis, Muhammad and Budiman, Arie Yudha and Mohruni, Amrifan Saladin and Sharif, Safian and Suhaimi, Mohd Azlan (2023) Ithenticate_Levenberg-Marquardt, Bayesian-regularization, and scaled conjugate gradient algorithms for predicting surface roughness accuracy on side milling AISI 1045. American Institute of Physics, Virtusl Plateform.

Mohruni, Amrifan Saladin (2023) PENGANGKATAN KETUA, SEKRETARIS, DAN ANGGGOTA KOMISI SENAT UNIVERSITAS SRIWIJAYA MASA TUGAS 2023-2026. UNIVERSITAS SRIWIJAYA.

Nukman, Nukman and Saggaff, Anis and Nawawi, Zainudin and Basri, Hasan and Kaprawi, Kaprawi and Said, Muhammad and Mohruni, Amrifan Saladin and Stiawan, Deris and Sipahutar, Riman and Buchari, Erika and Ibrahim, Eddy and Nurmaini, Siti and Agustina, Tuty Emilia and Suprapto, Bhakti Yudho and fransiska, widya and Yani, Irsyadi and Mataram, Agung and Arifin, Amir and Yanis, Muhammad and Sidik, Muhammad Abu Bakar and Saloma, Saloma and ermatita, ermatita and Arita, Susila and Bahrin, David and Resti, Yulia and Jambak, Muhammad Irfan and abdiansyah, abdiansyah and Rini, Dian Palupi and kunang, Yesi Novaria and Tutuko, Bambang and firdaus, firdaus and Hartono, Yusuf and Yusuf, Maulana and Taqwa, Ridhah and Kadarsa, Edi and Agustien, Melawaty and Siswanto, Ari and Mohadi, Risfidian and Melwita, Elda and Nurjannah, Siti Aisyah and Aminuddin, K. M. and Pratiwi, Diah Kusuma and Pahendra, Iwan and Dwijayanti, Suci and Erwin, Erwin and Sukemi, Sukemi and Hariani, Poedji Loekitowati and ferdiansyah, ferdiansyah and Rahayu, Wiwik and Moerwanto, A. S. and antoni, darius and Komariah, Leily Nurul and Samsuryadi, Samsuryadi and Barlin, Barlin and muhamad, muhamad and Partan, Radiyati Umi and Sutriyono, Edy and Setiawan, Budhi and Hadinata, Febrian and Bustan, M. Djoni and Haryati, Sri and widhiarso, Wijang and safaatunnur, unnur and Dewi, Tresna and Handayani, Sri and Rosidawani, Rosidawani and Husni, Nyayu Latifah and Anugrah Putranto, Dinar Dwi and Setiawan, Herri and Nasir, Subriyer and Budianta, Dedik and ridwan, muhammad and Sofijan, Armin and Lim, Taih Cheng and Chandra, Hendri and Syahrom, Ardiyansyah and Badaruddin, Muhammad and Sharif, Safian and Roni, Kiagus Ahmad and putra, Syaofiansyah Jaya and Suryadi, Fransiscus Xaverius and krispantono, - and oktarina, Maya Ftri (2023) KEPUTUSAN DEKAN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA Nomor: 1136/UN9.FT/TU.SK/2023 Tentang BEBAN KERJA DOSEN PADA PROGRAM STUDI PROGRAM DOKTOR FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GANJIL TAHUN AKADEMIK 2023/2024. FT UNSRI S3. (Unpublished)

Nukman, Nukman and Zulkarnain, Zulkarnain and Saputra, Ade and Kaprawi, Kaprawi and Pratiwi, Diah Kusuma and Yanis, Muhammad and Puspitasari, Dewi and Thamrin, Ismail and Hadi, Qomarul and Alian, Helmy and Santoso, Dyos and Gustini, Gustini and SUNDARI, ELLA and yudo, eko and YULIANTO, YULIANTO and bahiuddin, irfan and Firdaus, Aneka and Utami, Nurhabibah Paramitha Eka and Marwani, Marwani and Astuti, Astuti and Ellyanie, Ellyanie and PRAKOSO, AKBAR TEGUH and Suprapto, Bhakti Yudho and Mohruni, Amrifan Saladin and Yani, Irsyadi and Arifin, Amir and Bizzy, Irwin and intang, ambo and Akhyar, Gusri and Irmawan, Irmawan and Hadinata, Febrian and Mardhi, Alim and Gunawan, Gunawan and Adanta, Dendy and Arifin, Fatahul and Homzah, Ozkar Firdausi (2023) SK Pengelola Jurnal Rekayasa Mesin UNSRI 2023. Jurusan Teknik Mesin Unsri.

Mohruni, Amrifan Saladin (2022) PENGANGKATAN ANGGOTA SENAT UNNERSITAS SRIWIJAYA MASA TUGAS TAHUN 2022-2026. UNIVERSITAS SRIWIJAYA.

Mohruni, Amrifan Saladin (2022) Ithenticate_Disain Dan Pembuatan Kompor Berbahan Bakar Oli Bekas Menggunakan Software 3d Autodesk Fusion 360. FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2022) Ithenticate_Mechanical Properties membrane Polyethersulfone (PES) With Reinforcement Silver Nitrate. International Organization Of Scientific Research (IOSR).

Mohruni, Amrifan Saladin (2022) Ithenticate_The process mining method approach to analyze users’ behavior of internet in the Local Area Network of Sriwijaya University. Fakultas Teknik Universitas Mercu Buana, Jakarta, Indonesia.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA PROGRAM STUDI MAGISTER TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022 0075/UN9.FT/TU.SK/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin (2022) BEBAN KERJA DOSEN PADA JURUSAN TEKNIK MESIN FAKULTAS TEKNIK UNTVERSITAS SRIWIJAYA PERIODE SEMESTER GENAP TAHUN AKADEMIK 2021/2022. Mechanical Engineering Department, Indralaya.

Mohruni, Amrifan Saladin (2022) Ithenticate_Evaluation of surface integrity when drilling Inconel 718 through experimental measurement and finite element analysis. Springer Nature, Switzerland.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Peer Review_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Fakultas Teknik Universitas Sriwijaya. (Unpublished)

Mohruni, Amrifan Saladin and Yanis, Muhammad and Irsyadi, Yani (2022) Similarity_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. Turnitin Universitas Sriwijaya. (Submitted)

Resti, Yulia and Mohruni, Amrifan Saladin and Burlian, Firmansyah and Irsyadi, Yani (2022) Similarity_A probability approach in cans identification. Turnitin Universitas Sriwiajaya. (Submitted)

Mohruni, Amrifan Saladin (2021) Ithenticate_The influence of machining parameters using cryogenic cooling system. American Institute of Physics, Yogyakarta, Indonesia.

Mohruni, Amrifan Saladin (2021) Reviewer_SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY (SICETO 2021) FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA. FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2021) Ithenticate_Work scheduling program design for lecture attendance control and lecturer workload calculation with fingerprint and RFID identification device. Asosiasi Peneliti Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2021) Ithenticate_Improved Effectiveness of Controlled Procurement System Process with E-Procurement in PT. PLN (Persero) UIK Sumbagsel. Program Studi Magister Teknik Mesin Universitas Sriwijaya.

Mohruni, Amrifan Saladin (2021) Ithenticate_Performance evaluation of coolant concentration when end milling hardened steel using coated carbide tool. American Institute of Physics.

Mohruni, Amrifan Saladin (2021) Ithenticate_Feasibility study of pvc pipes as vertical axis wind turbines type savonius bucket for remote areas application. Praise Worthy Prize.

Mohruni, Amrifan Saladin (2021) Ithenticate_Industrial Control System Applied and Problems A Review and Experiences. Program Studi Magister Teknik Mesin Universitas Sriwijaya.

Mohruni, Amrifan Saladin (2020) Ithenticate_Rancang Bangun dan Sosialisasi Mesin Cetak 3D Tipe Digital Light Processing (DLP). FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA.

Bizzy, Irwin and Yanis, Muhammad and Mohruni, Amrifan Saladin and Firdaus, Aneka and Abrar, Arfan (2020) Mesin pencacah pakan hijauan ternak untuk kelompok peternak sapi talang kepuh kelurahan gandus kecamatan gandus Kota Palembang(Similarity). Fakultas Teknik Universitas Sriwijaya.

Thamrin, Ismail and Mohruni, Amrifan Saladin and Sipahutar, Riman and Yani, Irsyadi (2020) PROMOTOR_PEMODELAN KEKASARAN PERMUKAAN BENDA KERJA DAN TEMPERATUR PADA PEMBUBUTAN PANAS AISI 4340 DENGAN METODE RESPON PERMUKAAN DAN JARINGAN SARAF TIRUAN. Prodi S3 Ilmu Teknik Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2020) Ithenticate_A Cans Waste Classification System Based on RGB Images Using Different Distances of K-Means Clustering. Fakultas Teknik UNILA.

Mohruni, Amrifan Saladin (2020) Ithenticate_Conduction Heat Rate Analysis of Tool in AISI 4340 Turning Process. IOP Publishing Ltd, United Kingdom.

Mohruni, Amrifan Saladin (2020) Ithenticate_Experimental Vibration Study in Milling Thin-Walled Ti6Al4V under MQL using Coconut Oil as Cutting Fluid. IOP Publishing Ltd.

Mohruni, Amrifan Saladin (2020) Ithenticate_Simulation of the Effect of Cutting Angle in Lathe Process on Distribution of Cutting Temperature. IOP Publishing Ltd.

Mohruni, Amrifan Saladin (2020) Ithenticate_A REVIEW ON THIN WALLED CRYOGENIC MACHINING ON INCONEL OR AEROSPACE MATERIALS. Program Studi Magister Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Bizzy, Irwin and Yanis, Muhammad and Mohruni, Amrifan Saladin and Firdaus, Aneka and Abrar, A (2020) MESIN PENCACAH PAKAN HIJAUAN TERNAK UNTUK KELOMPOK PETERNAK SAPI DI TALANG KEPUH KELURAHAN GANDUS KECAMATAN GANDUS KOTA PALEMBANG (similarity). Fakultas Teknik Universitas Sriwijaya.

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) PROMOTOR_PERFORMANCE EVALUATION OF GREEN MACHINING ON THIN-WALLED TI6AL4V USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS. Prodi S3 Ilmu Teknik Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2019) PETUNJUK PEMBUATAN FORMAT MICROSOFT WORD BERDASARKAN PETUNJUK PENULISAN KARYA ILMIAH 2013 DI UNIVERSITAS SRIWIJAYA. UPT-Perpustakaan Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Sharif, Safian and Yani, Irsyadi (2019) Corresponding Author_Optimum Performance of Green Machining on Thin Walled Ti6al4v Using RSM and ANN in Terms of Cutting Force and Surface Roughness. Penerbit UTM Press, Johor Bahru, Malaysia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimum Performance of Green Machining on Thin Walled Ti6al4v Using RSM and ANN in Terms of Cutting Force and Surface Roughness. Penerbit UTM Press, Johor Bahru, Malaysia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimization of Surface Roughness Using RSM and ANN Modelling on Thin-Walled Machining Under Biodegradable Cutting Fluids. ARPN Publishers.

Mohruni, Amrifan Saladin (2019) Ithenticate_Cutting force prediction when green machining of thin-walled Ti-6Al-4V under dry and MQL-cutting using response surface methodology and artificial neural networks-algorithm. American Institute of Physics, USA.

Mohruni, Amrifan Saladin (2019) Ithenticate_High speed end milling of cobalt chromium molybdenum alloy using solid carbide tool under MQL condition. American Institute of Physics.

Ramli, A S and Sharif, Safian and Said, A Y M and Yusop, M S M and Karim, Zailani and Mohruni, Amrifan Saladin (2019) Ithenticate_Investigation of tool entry strategy when pocket milling titanium alloy, Ti-6Al-4V under wet condition. American Institute of Physics.

Mohruni, Amrifan Saladin (2019) Ithenticate_Application of RSM and ANN in Predicting Surface Roughness for Side Milling Process under Environmentally Friendly Cutting Fluid. IOP Publishing Ltd, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. IOP Publishing Ltd, USA.

Mohruni, Amrifan Saladin (2019) Ithenticate_Study in Development of Cans Waste Classification System Based on Statistical Approaches. IOP Publishing Ltd, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2019) Ithenticate_Investigation of Finite Element Modelling on Thin-Walled Machining of Ti6Al4V using DEFORM-3D. IOP Publishing Ltd, Switzerland.

Mohruni, Amrifan Saladin (2019) Ithenticate_Optimum Milling Parameters of Sugarcane Juice Production Using Artificial Neural Networks (ANN). IOP Publishing Ltd.

Mohruni, Amrifan Saladin (2019) Ithenticate_Production Planning and Control System with Just in Time and Lean Production A Review. Program Studi Magister Teknik Mesin Universitas Sriwijaya.

Mohruni, Amrifan Saladin (2019) Reviewer_MACHINABILITY CHARACTERISTICS IN POWDER MIXED ELECTRICAL DISCHARGE MACHINING (PMEDM) OF AISI D2 HARDENED STEEL_Jurnal Teknologi. Penerbit UTM Press, Johor Bahru, Malaysia. (Submitted)

Mohruni, Amrifan Saladin (2019) Ithenticate_Innovations in Manufacturing for Sustainability. Springer Nature, Switzerland.

Mohruni, Amrifan Saladin (2018) Reviewer_International Conference FIRST 2018 Applied Technology For Sustainable Development In Supporting Prosperous Human Existence. State Polytechnic of Sriwijaya.

Mohruni, Amrifan Saladin (2018) Reviewer_ONLINE TOOL WEAR MONITORING USING 2-CHANNEL STRAIN GAUGE SENSOR ANALYZED BY I-KAZ METHOD_Jurnal Teknologi. Penerbit UTM Press, Johor Bahru, Malaysia. (Submitted)

Mohruni, Amrifan Saladin (2018) Reviewer_EVALUATION OF MIST FLOW CHARACTERISTIC AND PERFORMANCE IN MINIMUM QUANTITY LUBRICATION (MQL) MACHINING_Measurement. Elsevier Ltd. All, Amsterdam, Netherlands.

Mohruni, Amrifan Saladin (2018) Ithenticate_Design of mechanical arm for an automatic sorting system of recyclable cans. IOP Publishing Ltd.

Mohruni, Amrifan Saladin (2018) Ithenticate_Optimum parameters for treating coolant wastewater using PVDF-membrane. EDP Sciences.

Mohruni, Amrifan Saladin (2018) Ithenticate_Green Technology Contribution in Development of Coolant Wastewater Filtration. Pascasarjana Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2018) Ithenticate_Development of Surface Roughness Prediction Model for Hard Turning on AISI D2 Steel using Cubic Boron Nitride Insert. Penerbit UTM Press, Johor BAhru, Malaysia.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Kurniawan, Edwin (2018) Corresponding Author_Development of Surface Roughness Prediction Model for Hard Turning on AISI D2 Steel using Cubic Boron Nitride Insert. Penerbit UTM Press, Johor Bahru, Malaysia.

Bizzy, Irwin and Sipahutar, Riman and Mohruni, Amrifan Saladin and Kadir, M. Zahri and Marwani, Marwani and Pratiwi, Diah Kusuma (2017) ALAT PEMANGGANG TIPE KONTINYU MEMAKAI TEKNOLOGI INFRARED BURNER BERBAHAN BAKAR GAS (Similarity). Fakultas Teknik Universitas Sriwijaya, Palembang.

Mohruni, Amrifan Saladin (2017) Ithenticate_Membrane Technology for Treating of Waste Nanofluids Coolant A Review. American Institute of Physics, Krabi, Thailand.

Mohruni, Amrifan Saladin (2017) Ithenticate_A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition. AIP Conference Proceedings, Krabi, Thailand.

Mohruni, Amrifan Saladin (2017) Ithenticate_Effects of Metal Fillers on Properties of Epoxy for Rapid Tooling Inserts. INSIGHT - Indonesian Society for Knowledge and Human Development, Semarang, Indonesia.

Mohruni, Amrifan Saladin (2017) Ithenticate_A Review of Minimum Quantity Lubrication Technique with Nanofluids Application in Metal Cutting Operations. INSIGHT - Indonesian Society for Knowledge and Human Development.

Mohruni, Amrifan Saladin (2017) Ithenticate_A probability approach in cans identification. MATEC Web of Conferences, Pangkal Pinang, Indonesia.

Mohruni, Amrifan Saladin (2017) Ithenticate_Evaluation of cutting force and surface roughness in high-speed milling of compacted graphite iron. EDP Sciences.

Mohruni, Amrifan Saladin (2017) Ithenticate_Automation of a Cans Waste Sorting System Using the Ejector System. Canadian Center of Science and Education, Ottawa, Canada.

Mohruni, Amrifan Saladin and Yuliwati, Erna and Sharif, Safian and Ismail, Ahmad Fauzi (2016) SK REKTOR 0139/UN9/KP/2016 PERSETUJUAN JUDUL DAN PENUNJUKAN TENAGA PELAKSANA PENELITIAN KOLABORASI INTERNASIONAL 2016 UNIVERSITAS SRIWIJAYA TAHUN ANGGARAN 2016 DENGAN JUDUL GREEN MACHINING ON TITANIUM ALLOY TO FOSTER ENVIRONMENTAL SUSTAINABILITY. Lembaga Penelitian dan Pengabdian Masyarakat (LP2M), Palembang, Indonesia.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Budiman, Arie Yudha and SUNDARI, ELLA and MARTOMI, EKA SATRIA (2015) Corresponding Authors_Mathematical Modeling of Surface Roughness on Tropical Wood Machining using Response Surface Methodology. Trans Tech Publications, Switzerland.

Mohruni, Amrifan Saladin (2015) Ithenticate_Design and Development of Sustainable Manufacturing Systems (Applied Mechanics and Materials Volume 815). Scitec Publications Ltd., Switzerland.

Mohruni, Amrifan Saladin (2015) Ithenticate_Optimasi Kondisi Pemesinan untuk Kekasaran Permukaan pada Proses Slot Milling Baja Tahan Karat AISI 304. Program Studi Teknik Mesin, Universitas Udayana, Denpasar, Indonesia.

Mohruni, Amrifan Saladin (2014) Ithenticate_Advances in Mechanical, Materials and Manufacturing Engineering (Applied Mechanics and Materials Vol. 660). Scitec Publications Ltd., Switzerland.

Arifin, Amir and Sulong, Abu Bakar and Gunawan, Gunawan and Mohruni, Amrifan Saladin and Yani, Irsyadi (2014) Palm Stearin as Alternative Binder for MIM: A Review (Peer Review). ISOMAse.

Mohruni, Amrifan Saladin (2014) Ithenticate_Achievements in Engineering Sciences (Applied Mechanics and Materials Vols. 548-549). Scitec Publications Ltd., Switzerland.

Mohruni, Amrifan Saladin (2013) Ithenticate_Polyvinylidene Fluoride Hollow Fiber Membranes for Refinery Wastewater Treatment Effect of Air Gap Length on Membrane Morphology and Performance. AMTEC-Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia.

Mohruni, Amrifan Saladin (2013) Ithenticate_PENGARUH VARIASI KECEPATAN DAN KUAT ARUS TERHADAP. Prodi S1 Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2012) Ithenticate_Mathematical modeling for turning on steels using Response Surface Methodology. Prodi Teknik Mesin dan Manufaktur, Universitas Gajah Mada, Yogyakarta, Indonesia.

Mohruni, Amrifan Saladin (2011) Ithenticate_Studi Eksperimental Optimalisasi Campuran Bahan Bakar Solar dengan Crude Jatropha Oil (CJO) Terhadap Karakteristik Motor Diesel Didacta Italia Test Bed T 85 D. BKS-TM Indonesia, Malang, Indonesia.

Mohruni, Amrifan Saladin (2011) Ithenticate_Optimization of Cutting Conditions when End Milling Aeronautic Materials (Ti-6Al-4V) using Genetic Algorithm and Response Surface Methodology. Fakultas Teknik Universitas Indonesia, Denpasar, Indonesia.

Mohruni, Amrifan Saladin (2011) Surat Tugas Dekan Fakultas Teknik Nomor 213b/H9.1.3/DT/2011 Penguji dan Pembimbing Skripsi Jurusan Teknik Mesin S1 Genap Tahun Akademik 2010/2011. Prodi S1 Teknik Mesin Universitas Sriwijaya, Palembang, Indonesia.

Mohruni, Amrifan Saladin (2011) Surat Tugas Dekan Fakultas Teknik Nomor 075a/H9.13/SK-FT/2011 Pembimbing Akademik Jurusan Teknik Mesin S1 Genap Tahun Akademik 2010/2011. Prodi S1 Teknik Mesin Universitas Sriwijaya.

Mohruni, Amrifan Saladin (2010) Surat Tugas Dekan Fakultas Teknik Nomor 676!H9.1.3/DT-Pd/2010 Pembimbing Akademik Jurusan Teknik Mesin S1 Ganjil Tahun Akademik 2010/2011. Prodi S1 Teknik Mesin Universitas Sriwijaya.

Resti, Yulia and Yani, Irsyadi and Mohruni, Amrifan Saladin and Burlian, Firmansyah and Amran, Ali Plagiarism and Similarity Checker of Automation of a Cans Waste Sorting System Using the Ejector System. Turnitin Universitas Sriwiajaya.

Resti, Yulia and Mohruni, Amrifan Saladin and Yani, Irsyadi and Burlian, Firmansyah and Amran, Ali Plagiarism and Similarity Checker of Design of mechanical arm for an automatic sorting system of recyclable cans. Turnitin Universitas Sriwiajaya.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Yuliwati, Erna and Sharif, Safian and Ismail, Ahmad Fauzi and Yani, Irsyadi and Gupta, Kapil Plagiarism and Similarity Checker of Green Machining of Thin-Wall Titanium Alloy. Turnitin Universitas Sriwiajaya.

This list was generated on Sun Dec 22 17:58:46 2024 WIB.